Summary
Although unstimulated horizontal wells have1 been successful in naturally fractured reservoirs and in reservoirs with gas- or water-coning problems, fracturing a horizontal well may be a viable option in certain situations. Because of the dependence of fracture orientation on well direction with respect to the stress field, the possibility of fracturing a horizontal well must be considered before the well is drilled. The appropriate contingency plans should be made to anticipate the possible low production from an unstimulated well. It should be remembered that fracturing a horizontal well may also dictate how the wellbore may be completed or oriented. Fracturing a horizontal well may take place in one of the following situations:
Restricted vertical flow caused by low vertical permeability or the presence of shale streaks.
Low formation productivity because of low formation permeability.
The presence of natural fractures in a direction different from that of induced fractures. Thus, induced fractures have a high chance of intercepting the natural fractures.
Low stress contrast between the pay zone and the surrounding layers. In this case, a large fracturing treatment of a vertical well would not be an acceptable option because the fracture would grow in height as well as length. Drilling a horizontal well and creating either several transverse or longitudinal fractures would allow rapid depletion of the reservoir through the fractures.
Although fundamentally similar to fracturing vertical wells, fracturing horizontal wells has its unique aspects that require special attention to secure successful treatment. Differences between horizontal and vertical wells exist in areas of rock mechanics, reservoir engineering, and operational aspects. To start with, the basic rock-mechanics aspects are examined.
