... [%] Not a limit Ambient air temperature [°C] ≤ 30 Electricity tariff [USD/kWh] ≥ 0.07 Figure 1 Principal Scheme of an ORC Installation. Figure 2 A photograph of an ORC Installation in an oilfield in Mexico. Figure 14 Reduction of UTC WH Associated with the ORC Operations...

... water with 17Kppm CaCl 2 and 70ppm Iron Figure 8 Effect of proppant settling velocity in 2gpt of HVFR vs. PEO fracture fluids. Figure 2 Chemical Structure of various Friction Reduction (FR) agents and a comparison of friction pressure for water containing only 2% KCl vs. water...

... Performance of biosurfactant C (left) and BS (right) in the reduction of the crude oil layer thickness at temperatures 25 and 35°C, and S:O ratios 1:5, 1:10, and 1:50. Figure 2 a) Reduction of the crude oil layer thickness when applying biosurfactants C and BS at S:O ratio of 1:5 and temperatures...

... and discharge pipelines are connected in the field. Health, safety, and environmental (HSE) risks are also minimized. Savings in river transportation: Up to 60% savings in transportation costs were achieved. In addition, the boat trip reduction avoided 320 t of CO 2 emissions to the environment for the 20...

.... This innovative and integrated digital solution has shown outstanding results. Monitoring the data from the water-handling system in real time and applying engineering workflows has led to a 76% reduction in processing time, 75% reduction in commuting for data gathering, and 5 t of carbon dioxide (CO 2...

... Table 1 Impact of AICV Wells on Emissions and Expenses. Category Value Increase in Revenue 109% Reduction of CO 2 Emissions 71% Reduction in Energy Output 42% Reduction in Energy Expenses 28% Figure 8 Average energy output comparison between AICV...

...-Poiseuille and Bernoulli's principles. Based on the Integrated performance reviews, the technology has shown the benefit of accelerating oil production as well as reduction of unwanted water which not only reduces the OPEX of these wells but at the same time has a positive impact on the environment and Green...

... measurements, bottle tests for gelation time and gel stability assessments and Corefloods using an artificially fractured core from the pilot area. This coreflood was conducted to measure gellant injectivity, gel parting pressure, permeability reduction (Rk) and pore volume reduction obtained by gel placement...

... to ~50% as compared to pre-job water cut at ~80%. Post Nano-Clay treatment indicated instantaneous oil gain of about 219 stb/day from 171 stb/d to 390 stb/day. After one and a half year of monitoring, the water cut maintained with expected water cut reduction range in between 10% to 50% from the baseline...

... stability by registering its effectiveness at 300°F and above. The novel RPM-T developed in this work was shown to work for both carbonate and sandstone formations. This implies a greater versatility in application and reduction in surface inventory for mixed-lithology fields. The RPM-T improves well...

..., reduce costs, and minimize emissions at the QSWP. The Solar Thermal System has been installed to preheat the feedwater for the diesel steam boilers. As a result, diesel consumption has been reduced by 130 thousand liters per year, leading to a reduction of 10 thousand tons of CO2 emissions annually...

... from crude oil treated with Reference EB with and without acidification and Product A Table 3 Produced water analysis after treatment with a reference flocculant agent and Product B, with percentage reduction of WSO content calculated in relationship to the blank...