The data-driven interwell simulation model (INSIM) has been recognized as an effective tool for history matching and interwell-connectivity characterization of waterflooding reservoirs. INSIM-FT-3D (FT: front tracking) was recently developed to upgrade the applicationdimension of INSIM series data-driven models from two-dimensional (2D) to three-dimensional (3D). However, INSIM-FT-3D cannot accurately infer the dynamic change of well-connectivity and predict well's bottom-hole pressure (BHP). The main purpose of this study intends to expand the capability of INSIM-FT-3D to empower for the assimilation of BHPs, the reliable prediction of water breakthrough and the characterization of dynamic interwell-connectivities.

The default setting of well index (WI) in INSIM-FT-3D based on Peaceman's equation does not yield accurate BHP estimates. We derive a WI that can honor the BHPs of a reference model composed of a set of 1D connections. When history matching BHPs of a 3D reservoir, we show that the derived WI is a better initial guess than that obtained from Peaceman's equation. We also develop a flow-path-tracking (FPT) algorithm to calculate the dynamic interwell properties (allocation factors and pore volumes (PVs)). Besides, we discuss the relationship between the INSIM-family methods and the traditional grid-based methods, which indicates that the INSIM-family methods can calculate the transmissibility of the connection between coarse-scale cells in a more accurate manner. As an improvement of INSIM-FT-3D, the newly proposed data-driven model is denoted as INSIM-FPT-3D.

To verify the correctness of the derived WI, we present a 1D problem and a T-shaped synthetic reservoir simulation model as the reference models. BHPs and oil production rates are obtained as the observed data by running these two reference models with total injection/production-rate controls. An INSIM-FPT-3D model is created by specifying the transmissibilities and PVs that are the same as those in the reference model. By applying the derived WIs in INSIM-FPT-3D, the resulting BHPs and oil rates obtained agree well with the reference model without further model calibration. Applying INSIM-FPT-3D to a synthetic multi-layered reservoir shows that we obtain a reasonable match of both BHPs and oil rates with INSIM-FPT-3D. Compared with the FrontSim model, the INSIM-FPT-3D model after history matching is shown to match the dynamic PVs from FrontSim reasonably well and can correctly predict the timing of water breakthrough.

By allowing for the assimilation of BHP data, we enable INSIM-FPT-3D to history match a green field with limited production history and forecast the timing of water breakthrough. The improved INSIM-FPT-3D leads to more accurate characterization of the interwell connectivities.

You can access this article if you purchase or spend a download.