... completions, enable zonal isolation and selective flow control, mitigating water coning and enabling access to bypassed or attic oil. This technology shifts production strategies from aggressive fluid production to a more balanced, managed drawdown approach, allowing for sustained oil production and improved...

... Background The Bretaña Norte reservoir, located in the Peruvian Amazon within PetroTal's Block 95, presents significant challenges for efficient oil production due to high water cuts and complex reservoir heterogeneities, which hinder efficient oil production. Conventional methods have struggled...

... oil production prediction result journal peak rate production rate xu and leung Introduction Production forecasting plays a crucial role in reservoir management and strategic exploration. Traditionally, production forecasting for the primary recovery has relied on analytical methods...

... early water breakthrough and reducing water cut, while achieving significant gains in cumulative oil production. The study involved analyzing production data from 22 producing wells, 17 of which were equipped with AICD completions, and comparing them against deviated wells and one horizontal well...

... a variety of operating conditions. The modeling indicates that for this particular well, incremental oil production of 300% over primary EUR may be achieved in the first five years of EOR operation via the SuperEOR method. A further enhanced EOR method, UltraEOR, is shown to potentially increase oil...

... huff hydrogen steam-assisted gravity drainage thermal method mole fraction eagle ford shale puff co 2 comparison forecast period global mole fraction shale reservoir cumulative oil production upstream oil & gas gas injection method co 2 reservoir methane injection oil recovery oil...

... the significant benefit of AICV in steam and/or gas reduction and consequently increased oil production. Reduction in steam production will improve the overall SAGD operation performance. This will also result in more cost-effective oil production. In addition, the annular flow in a well completed by inflow...

... findings is that considering a small training dataset, the proxy model can reproduce the capabilities for predicting oil production in complex low and ultra-low permeability reservoirs with significantly reduced error, relative to the multi-porosity reservoir simulator. Finally, the possibility...

... during the depletion stage is the dominant oil-recovery mechanism. However, the extended soaking period helps in oil recovery by allowing sufficient gas diffusion into the core plug. We observe that enrichment of injecting gas by C 2 results in earlier and more oil production compared to pure C 1...

... canada government drawdown presentation flow control equipment breakthrough society intervention viscosity novel inflow control device bridge restriction aicd tesla device water production gas breakthrough reynolds number flow rate oil production fluid dynamics completion monitoring...

.... Thus, the objective of this study is to evaluate flow units and capillary pressures of Chicontepec, as well as drilling and completion methods, with a view to improve the characterization of the reservoir(s) and, thus, oil recoveries. Current cumulative oil production of Chicontepec is 440.38 million...

... the oil production. In this paper, we will present a field case study of the complex displacement operation. We will discuss the details from the foaming agent selection, completion design, operation management and performance data analysis. To improve production rates for the low producing CSS and SF...

... injection and cutting the GHG emission drastically. This study revisited the steam-solvent process to find a suitable combination of solvent type and operating strategies that can reduce the steam injection and GHG emission significantly, and without significantly compromising the oil production. Two...

.... Following a convention in the industry, the wells with lateral length longer than 850 meters are labeled as "long" and those shorter than 850 meters are labeled as "short". Eventually, normalized oil production by long wells completed or retrofitted with FCDs is compared with those without FCDs to supply...

... are performed in different scenarios of a SAGD late life process with non-condensable gases (NCGs), and these results confirmed a significant reduction in the gas liquid ratio (GLR), and an increased oil production when using AICV compared to the open hole case. Simulation results demonstrated that utilizing...

.... chemical flooding methods enhanced recovery upstream oil & gas bitumen asphaltene precipitation propane csi experiment oil production bitumen rf pressure pulse pressure decline asphaltene content oil sand complex reservoir concentration depressurization process core surface interaction...