Skip Nav Destination
Search Results for Produced water compressibility
1-20 of 37988 Search Results for
Produced water compressibility
Paper presented at the SPE International Conference and Exhibition on Formation Damage Control, February 24–26, 2016
Paper Number: SPE-179026-MS
... and rock compressibility highly affect well behaviour prediction in many applications of water injection. Water injection into gas reservoirs is utilised mostly for produced water disposal, which could help maintain reservoir pressure and accelerate gas production ( Sun et al. 2014 ). Re-injection of water...
Paper presented at the SPE Trinidad and Tobago Section Energy Resources Conference, June 25–26, 2018
Paper Number: SPE-191206-MS
... is highly compressible. The primary value of water injection as a secondary gas recovery technique stems from the use of high water rates from nearby producing wells under aquifer drive, which would otherwise be shut-in. The technique can also be managed as a water disposal option for adjacent fields, thus...
Paper presented at the SPE Europec, December 1–3, 2020
Paper Number: SPE-200652-MS
... drive. For the three fields considered in this study only one has significantly high PV compressibility. However, all three fields are expected to have limited aquifer support and hence water injection would be required to achieve high recovery factors. Furthermore, since the three fields are planned...
Faisal Yahyaai, Basayir Lawati, Sara Abri, Maryam Salmi, Mohamed Razvi, Salha Mahruqi, Arlene Winchester, Koning Maartje
Paper presented at the SPE Conference at Oman Petroleum & Energy Show, March 21–23, 2022
Paper Number: SPE-200113-MS
... recovery through new technologies to unlock additional reserves. Extensive well, reservoir, and field management (WRFM) interventions have reduced the field's production decline and sustained the production performance through the following: Water producing wells – analytical techniques are used...
Paper presented at the PAPG/SPE Pakistan Section Annual Technical Conference and Exhibition, November 21–23, 2016
Paper Number: SPE-185311-MS
... compression paradigm shift constraint gas reservoir completion size water drive gas reservoir reservoir abandonment pressure recovery Introduction Water drive gas reservoirs might produce water with the passage of time depending on pressure depletion and water-gas contact movement ( Latil, 1980...
Publisher: Offshore Mediterranean Conference
Paper presented at the Offshore Mediterranean Conference and Exhibition, March 27–29, 2019
Paper Number: OMC-2019-1025
... appear to be the best solution for ultra-deep water gas field when the main outcome is the lack of pressure to produce ([8910 providing liquid management is not an issue. In this paper, subsea compression is not considered as another extension to single 26 architecture to overcome production issue...
Paper presented at the SPE Western Regional Meeting, April 23–27, 2017
Paper Number: SPE-185683-MS
... in Producer 5 were analyzed using analytical radial composite models which is discussed next. Production Constraints and their Impact on the Interference Test Table 2 Total Fluid Compressibility Table Fluid s x c x (μsips) s x *c x (μsips) Oil 0.3 10.7 3.2 Water 0.7 5.7...
Paper presented at the SPE European Formation Damage Conference & Exhibition, June 5–7, 2013
Paper Number: SPE-165085-MS
... proppant using Marcellus produced water. This produced water had the highest level of TSS (375 mg/l) of the three used in this study. The results showed that permeability values decreased with increasing compressive stress because of the reduction in pore space between the proppant particles. The trend...
Haitham.H Al Masroori, Abdullah.S. Al-Shuely, Nabil.S. Al-Siyabi, Salim.K. Al-Subhi, Dawood.N. Al Kharusi, Roeland Angilst, Patrick. Ezechie, Nadhal Al Marhoon
Paper presented at the Abu Dhabi International Petroleum Exhibition & Conference, November 15–18, 2021
Paper Number: SPE-207395-MS
... jet pump artificial lift system condensate reservoir multiphase pump enhanced recovery gas well deliquification drillstem testing reserves evaluation complex reservoir drillstem/well testing compressor depletion compression stage 3 gas injection water production upstream oil & gas...
Paper presented at the SPE Europec featured at 79th EAGE Conference and Exhibition, June 12–15, 2017
Paper Number: SPE-185836-MS
... , an inter-stage water cooling system, and a dense-phase pump (DPP), which compresses the dry CO 2 and then transports it to the field location via an 85 km pipeline for injection. The project includes a row of four injectors and four producers, and two observation wells for monitoring and surveillance...
Azfar Mehmood, Abdul Sattar, Nabeel Akbar, Saqib Jah Temuri, Adnan Fazal, Salman Saeed, Saad Yousuf Khokhar, Arif Yousuf, Aziz ur Rehman, Afnan Ahmed Dar
Paper presented at the SPE/PAPG Pakistan Section Annual Technical Symposium and Exhibition, November 18–20, 2019
Paper Number: SPE-201172-MS
... regulations. Unwanted/excess water production is one of the most serious problems for oil or gas fields, especially for mature reservoirs. Water production impacts the economic life of reservoirs and ultimate recovery. The cost of produced water disposal in an environment friendly manner is a major concern...
Publisher: Petroleum Society of Canada
Paper presented at the Canadian International Petroleum Conference, June 10–12, 2003
Paper Number: PETSOC-2003-178
...). An alternative method of produced water treatment is vertical tube, falling film, vapor compression evaporation. This method: (1) eliminates physical- chemical produced water treatment, (2) results in lower lifecycle costs, (3) does not produce any softener sludge for disposal, (4) minimizes the number...
Paper presented at the The 32nd International Ocean and Polar Engineering Conference, June 5–10, 2022
Paper Number: ISOPE-I-22-197
... ABSTRACT Nowadays, heavy metal pollution in seabed silt is becoming more and more serious. In this study, a new disposal method of using dredged sludge mud mixed with quicklime, sand and cement to produce bricks was proposed. Taking the water absorption and compressive strength of unburned...
Paper presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, September 20–22, 2011
Paper Number: SPE-147808-MS
... compressibility mishandling caused a difference of 4 mmbbl, the pore volume compressibility caused 2 ~ 3 mmbbl, and the connate water compressibility caused 1 mmbbl. Nisku "A" pool recorded 242,200 bbl of formation water production during its 30-year development lifespan, and most of this water was produced...
Paper presented at the The Fifteenth International Offshore and Polar Engineering Conference, June 19–24, 2005
Paper Number: ISOPE-I-05-426
..., the solutions including different amounts of magnesium sulfate and sodium sulfate were prepared. The flexural and compressive strength of the mortars prepared with these solutions were determined and the results were compared with those of mortars produced with tap water. Normal Portland cement (CEM I 42.5 R...
Publisher: Offshore Technology Conference
Paper presented at the Offshore Technology Conference, May 1–4, 2017
Paper Number: OTC-27729-MS
.... The operating principle of an ACAES system is that, using produced renewable energy, air is first compressed to be stored during low energy demand period. Storage is made through some natural cavity. Then the air is expanded during high energy demand period to return stored energy. A parallel heat transfer...
Paper presented at the SPE Annual Technical Conference and Exhibition, October 9–11, 2017
Paper Number: SPE-187083-MS
... conditions. This investigation includes studying the effects of disposal-zone storativity, compartment size, conductivity, formation compressibility, heterogeneity, and natural fractures. Additionally, we explored the effects of communication with overlying producing zone, communication through completion...
Paper presented at the SPE Annual Technical Conference and Exhibition, September 30–October 2, 2013
Paper Number: SPE-166279-MS
... water volume. Around 96% of the calculated effective water volume is produced which is in agreement with the low water rates 2 STB/D. TABLE 4 EFFECTIVE WATER VOLUME CALCULATIONS FOR WELL FF-1 Slope of BDF period, m pss 0.158 Water FVF, B w (res bbl/STB) 1 Gas compressibility, c g...
Paper presented at the SPE Project and Facilities Challenges Conference at METS, February 13–16, 2011
Paper Number: SPE-141860-MS
... compression system. Pul-A was brought to production in March 1978 with an average oil production of 1,400 barrels oil per day (BOPD). The oil production peaked at around 35,000 BOPD in 1979. Previously produced water was treated using a corrugated plate interceptor (CPI) unit prior to discharge. The water...
Paper presented at the SPE Latin American and Caribbean Petroleum Engineering Conference, March 25–28, 2001
Paper Number: SPE-69651-MS
... examination of this process. This paper will review the concept of waterflooding of low-pressure gas reservoirs and reintroduce it as an alternative, or supplement, to compression. The process would be integrated in the overall field management as an economical option of produced water disposal. Two...
Product(s) added to cartClose Modal