Skip Nav Destination
Search Results for Mandrel
1-20 of 4432 Search Results for
Maoxian Xiong, Junfeng Xie, Hongtao Liu, Jingcheng Zhang, Weilong Liu, Kaiyin Hu, Jianping Zhou, Xingliang Xu, Lei Ma, Mifeng Zhao, Wei Fan, Fangting Hu
Paper presented at the International Petroleum Technology Conference, March 23–April 1, 2021
Paper Number: IPTC-21362-MS
... Abstract In view of the high shut in pressure of gas wells in Kuqa mountain front ultra-high pressure block where the highest shut in pressure of KeS X is 115MPa, the 105MPa casing head currently used can not meet the shut in demanding, so the risk of well control is high. A new 140MPa mandrel...
Stuart Murchie, John Gjertsen, Magne Grødem, Martin Severin Sætrevik, Espen Osaland, Peter Lykke Sørensen, Steen Korsgaard Hansen
Paper presented at the SPE/ICoTA Coiled Tubing and Well Intervention Conference and Exhibition, March 27–28, 2018
Paper Number: SPE-189952-MS
... Abstract The client had a leaking gas lift valve (GLV), which needed to be replaced to restore the integrity of the well. The side pocket mandrel (SPM), was located at a high angle part of the well, positioned on the low side and sand debris had accumulated in and around the GLV, impairing its...
Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 17–19, 2017
Paper Number: SPE-186202-MS
... Running & Pulling Tool . Running & Pulling Tool serves to jar in and jar out Blanking Plug from Side Pocket Mandrel. It has two Flexi hand and is open when Running and Pulling Tool is pulled from bottom pass the mandrel. Top Flexy Hand is connected to Jar Head that has two different...
Paper presented at the SPE/ICoTA Coiled Tubing and Well Intervention Conference and Exhibition, March 21–22, 2017
Paper Number: SPE-184748-MS
... Typical Packer with mandrel with cutting zone Once the inner mandrel of the packer has been cut, the packer will be allowed to release by pulling a release weight value (approximately 100,000 lbs.) to disengage the slips, elements etc. Traditional cutting methods consisted of Chemical...
Paper presented at the 2015 SEG Annual Meeting, October 18–23, 2015
Paper Number: SEG-2015-5921967
...Efficient simulation of transient electromagnetic measurements in the presence of a metal mandrel Sushant M. Dutta*, Baker Hughes Summary Many wireline induction and logging while drilling (LWD) resistivity tools basically comprise transmitter and receiver coils wound over a metal mandrel/pipe...
Paper presented at the SPE/ICoTA Coiled Tubing and Well Intervention Conference and Exhibition, March 25–26, 2014
Paper Number: SPE-168304-MS
... of more than 400 tubing straddles set since 1985. SPE paper 104055 showed that the majority of straddles were installed over damaged gaslift valves and gaslift mandrels. Damage to a gaslift valve can occur when it is eroded (or flow cut) due to fluid unloading of the casing by tubing annulus through...
Paper presented at the 2011 SEG Annual Meeting, September 18–23, 2011
Paper Number: SEG-2011-0459
... generates broad-band Stoneley waves in a borehole. This borehole is intersected by a horizontal liquid-filled gap, representing the fracture. Fracture width can be adjusted by using a mandrel sample, as explained later. The borehole is equipped with a logging pressure probe, so that the reflection...
Paper presented at the International Oil and Gas Conference and Exhibition in China, June 8–10, 2010
Paper Number: SPE-136727-MS
... Abstract The design of orienting rotary steerable drilling tools needs to take both the location of the floating support points and flexural distortion of the mandrel into account. With consideration of the eccentric displacement and bias of offset components in such a biasing apparatus...
Journal: Journal of Petroleum Technology
J Pet Technol 62 (05): 75–76.
Paper Number: SPE-0510-0075-JPT
Published: 01 May 2010
...Karen Bybee This article, written by Assistant Technology Editor Karen Bybee, contains highlights of paper SPE 121548, ’Innovative Retrievable Lock Mandrel Extends Monobore Com pletion Potential,’ by Francois G. Millet, SPE, and Pierre-Arnaud Foucher, Geoservices Equipements; Paul Helderle, E.W.E...
Folorunso Afolabi, Sarah Olayemi, Paul Avre, Virgil Iwuh, Augustine Iwuogu, Inem Ekong, Linda Dennar
Paper presented at the Nigeria Annual International Conference and Exhibition, August 3–5, 2009
Paper Number: SPE-128888-MS
... Abstract Shell Petroleum Dev. Coy. onshore wells in Nigeria are from brown fields producing since 1960. The fields have about 300 flowing strings. The fields are characterized by various challenges including depleted reservoir pressures, some non-mandrel wells, single and dual string...
Paper presented at the SPE/ICoTA Coiled Tubing & Well Intervention Conference and Exhibition, March 31–April 1, 2009
Paper Number: SPE-121548-MS
... traditional extrusion gaps and so performs well in HP/HT wells. This revolutionary kinematic seal, associated with a breakthrough fail-safe mandrel mechanism has been successfully qualified in a very harsh environment (condensates and sour gases) where conventional technology has always been unsuccessful...
Paper presented at the 2006 SEG Annual Meeting, October 1–6, 2006
Paper Number: SEG-2006-0835
... Summary A lot of wireline induction and logging-while-drilling (LWD) resistivity tools include a long metal mandrel encompassed by solenoid transmitting and receiving coils. In this paper we discuss the choice of boundary conditions and, consequently, the type of the solution which could...
SPE Res Eval & Eng 8 (03): 255–263.
Paper Number: SPE-84245-PA
Published: 01 June 2005
... resistivity-tool concepts have been considered. Directional resistivity measurements and improved anisotropy measurements are among the benefits promised by this type of device. Analyses based on point-magnetic dipole antennas were used to illustrate these potential benefits. The effects of a metallic mandrel...
Paper presented at the 2004 SEG Annual Meeting, October 10–15, 2004
Paper Number: SEG-2004-0330
... ABSTRACT An analytical solution to Navier's equation is derived for the case of an eccentric mandrel inside a fluid-filled borehole. The exact boundary conditions are applied using an adaptation of a rigorous technique that has successfully been used to solve electromagnetic problems...
Paper presented at the 2004 SEG Annual Meeting, October 10–15, 2004
Paper Number: SEG-2004-0282
... ABSTRACT A new analytical solution for acoustic wave propagation in a borehole with an eccentric mandrel is used to compute wavenumbers and excitation vectors for several guided modes as a function of tool position. Parameters used in the examples are relevant for slow shear wave logging-while...
Paper presented at the SPE Annual Technical Conference and Exhibition, October 5–8, 2003
Paper Number: SPE-84245-MS
... and improved anisotropy measurements are among the benefits promised by this type of device. Analyses based on point-magnetic dipole antennas were used to illustrate these potential benefits. The effects of a metallic mandrel, borehole, and invasion were not considered due to the absence of a suitable forward...
Paper presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, September 9–11, 2003
Paper Number: SPE-80531-MS
... during year 1984. To maintain reservoir pressure, suitable water injection scheme was put in place in 1984–85. The conventional multi-mandrel gas lift system was applied as artificial lift mode and operating in the field since 1987. In multi-mandrel conventional gas lift system, 4–6 mandrels are used...
Paper presented at the SPE Production Operations Symposium, April 2–4, 1995
Paper Number: SPE-29450-MS
... Gas-Lift Unloading and Operating Simulation as Applied to Mandrel Spacing and Valve Design. Abstract Gas-lift has been practiced for many years using principles developed in the 1940's and 1950's. For the most part, these principles have been developed based on experience and "rules of thumb...
Paper presented at the SPE Artificial Lift Conference — Latin America and Caribbean, May 27–28, 2015
Paper Number: SPE-173935-MS
J. C. Escobar-Remolina, W.. Barrios-Ortiz, J.. Mantilla-Villamizar, J. A. Vargas-Medina, L.. Sanabria-Gomez, B. C. Davidson, A.. Sanchez-Lona, J. M. Wegmann-Sanchez
Paper presented at the SPE Western North American and Rocky Mountain Joint Meeting, April 17–18, 2014
Paper Number: SPE-169544-MS
..., and INJ-3, at the Ecopetrol's Yarigui Cantagallo field re-completed with newly designed pulsing selective control valves (P-SCFV). The three wells originally had conventional selective control flow valves (C-SCFV) in side-pocket mandrels. While a total of 31 valves were replaced in seven wells, this paper...
Product(s) added to cartClose Modal