Skip Nav Destination
Search Results for Inhibitor truck
1-20 of 592 Search Results for
Paper presented at the SPE Annual Technical Conference and Exhibition, September 23–26, 1979
Paper Number: SPE-8414-MS
... was by truck at each individual well. Wright and Kepley reported ten years ago on a method of using a corrosion inhibitor-biocide by truck. This method is much more expensive by modern day standards and foaming of the chemical mixture was at times a problem to the storage field operations although problem...
Paper presented at the CORROSION 2008, March 16–20, 2008
Paper Number: NACE-08153
... of deaeration. Keywords: ethanol, pipelines, stress-corrosion cracking, inhibitors, oxygen scavengers, deaeration INTRODUCTION Currently, FGE is transported primarily by railroad tanker cars, tanker trucks, and barges. SCC has been observed in carbon steels in contact with FGE in user terminals, storage tanks...
Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, May 12–13, 2014
Paper Number: SPE-169632-MS
... artificial lift design and installation of new tubing, new pumps following API standards, corrosion inhibitor injection, dosing skids and optimization of production parameters. At the same time Corrosion Monitoring Devices (DMC) were installed in 10% of injection points. Appropriate chemical trucks...
Sunder Ramachandran, Patrick Rodgers, Preston Stewart, George Prescott, Rosanel A. Morales, Haitao Fang, Jagrut Jani, Jordan Wleklinski, Mathew Morton
Paper presented at the CORROSION 2017, March 26–30, 2017
Paper Number: NACE-2017-9450
... is a popular method especially when there are dedicated trucks to distribute the chemical under conditions of high pressure. 8 The application of these corrosion inhibitors to the prevention of corrosion in varied conditions is described. In some instances the use of these inhibitors has been helpful...
Paper presented at the SPE Annual Technical Conference and Exhibition, September 26–28, 2016
Paper Number: SPE-181735-MS
... of halite scale for a given period of time. This is accomplished through the use of a new porous ceramic proppant-based chemical delivery system in which a halite inhibitor is infused. The infused halite inhibitor is encapsulated with a semi-permeable membrane to regulate the elution rate of the inhibitor...
Paper presented at the SPE Middle East Oil and Gas Show and Conference, March 18–21, 2019
Paper Number: SPE-194893-MS
... involves bullheading a corrosion inhibitor batch treatment. However, high costs and low effectiveness are driving a shift from batch treatments to continuous downhole treatment techniques. This paper describes the process of converting to continuous downhole treatments. Methods, Procedures, Process...
Paper presented at the SPE Annual Technical Conference and Exhibition, October 4–7, 2009
Paper Number: SPE-124868-MS
... wells in this field is periodic treater truck batch treatments using a paraffin dispersant and using hot oil when necessary. Operators 2 & 3 plan to use the composite paraffin inhibitor for all future fracture jobs. This includes horizontal wells that are planned for the near future. Their fields...
Paper presented at the SPE Russian Oil and Gas Technical Conference and Exhibition, October 28–30, 2008
Paper Number: SPE-117381-MS
... a batching pig into the expansion chamber. Close the gate valve and drain valve. Special extension rod may be used to push the batching pig into the expansion chamber. Steam truck shall be used to open the gate valve in winter time. 3.6. Assemble injection line to inject corrosion inhibitor. 3.7. Hook up...
Mike Jackson, Marisol Gonzalez, Shelley Zhou, Carlos A. Palacios, Thais M. Hernandez, Danielli Quintero
Paper presented at the CORROSION 2003, March 16–20, 2003
Paper Number: NACE-03331
... of the relationships established by NACE and API. Current corrosion treatments on the mechanical pumping wells consist of batch treatments using a dedicated treater truck or continuous injection via casing using a side stream flush. The frequency of batch treatments, the amount of inhibitor used and the flush volume...
Paper presented at the SPE International Symposium on Oilfield Chemistry, April 20–22, 2009
Paper Number: SPE-121719-MS
.... Performance of friction reducers can be strongly influenced by the presence of salts, very high or very low pH, or other typical process additives, such as biocides, corrosion and scale inhibitors, hydrogen sulfide (H 2 S) scavangers, etc. Since most friction reducers are emulsion polymers, an important issue...
Journal: Journal of Petroleum Technology
J Pet Technol 28 (06): 624–628.
Paper Number: SPE-5612-PA
Published: 01 June 1976
.... Successful corrosion control programs using these treating methods are expensive, since they usually require a truck-mounted pump and operator in addition to the inhibitor. Schedules for such programs are frequently difficult to maintain, resulting in treatment inconsistency. It is also difficult to optimize...
Paper presented at the CORROSION 2020, June 14–18, 2020
Paper Number: NACE-2020-14686
... in the flowlines are merged into one batch in the gathering pipeline or production manifold. The controller simulates the fluid batches moving along the flowlines using a real-time simulation model and provides automatic control of the systems generating the fluid batches. The dose of corrosion or wax inhibitors...
Paper presented at the International Petroleum Technology Conference, November 14–16, 2016
Paper Number: IPTC-18840-MS
... are transported to the injection site by trucks and supply vessels. Moreover, CO 2 impact study was conducted, and it is found that we can manage the potential risks related to corrosion and scale formation by using suitable countermeasure such as CRA's and inhibitors. Finally, based on the result of corrosion...
Paper presented at the SPE Annual Technical Conference and Exhibition, October 30–November 2, 2011
Paper Number: SPE-145454-MS
... Trucking Transport Cost per Hour $ 95 /hour Equivalent Cost per Barrel $ 5.07 /bbl Disposal / Injection Cost $ 1.00 /bbl The model assumes both biocide and scale inhibitor are fully replaced by the process. We assumed a 10% increase in effectiveness of the anionic friction reducer using...
Paper presented at the International Petroleum Technology Conference, December 6–9, 2015
Paper Number: IPTC-18270-MS
... Abstract To avoid hydrate formation, Kinetic Hydrate Inhibitor (KHI) is injected into the upstream wet gas pipelines. KHI eventually remains in the produced water which is treated for H2S and oil removal before it is re-injected into deep disposal wells. Industry regulators in the State...
Paper presented at the SPE Western Regional/AAPG Pacific Section Joint Meeting, May 19–24, 2003
Paper Number: SPE-83481-MS
.... The current operator took over 1 December 1998 and a decision was made to switch from conventional corrosion treatment to the new binary approach. Treatments for each well are done every two weeks using two or three gallons of binary corrosion inhibitor by batch treatment via treater truck. Overflush varies...
Paper presented at the CORROSION 2010, March 14–18, 2010
Paper Number: NACE-10075
..., and methanol. Recently, it has been found that the use of inhibitors is promising in order to inhibit SCC (6). It has been shown in general that if the corrosion potential of carbon steel in FGE is higher than 100 mV vs. Ag/AgCl (with 1 M LiCl in EtOH) carbon steel is susceptible to SCC. Corrosion...
Publisher: World Petroleum Congress
Paper presented at the 3rd World Petroleum Congress, May 28–June 6, 1951
Paper Number: WPC-4708
..., tankers, tank trucks, pipe lines, meters, and pumps. Corrosion of customers equip- ment though not the responsibility o the petro- leum industry can be controlled with the same prod- uct-soluble inhibitor used to protect refinery-owned equipment, and only one blending operation is required. This product...
Paper presented at the CORROSION 2008, March 16–20, 2008
Paper Number: NACE-08369
... to protect galvanized and steel surfaces. After two years operation, galvanized tubes and mild steel in systems show outstanding corrosion protection, control of ?white rust? and no scale at TDS up to 150,000 in tower water. New technology that produces inhibitor chemistry from source water silica permits...
Paper presented at the SPE Permian Basin Oil and Gas Recovery Conference, March 21–23, 2000
Paper Number: SPE-59541-MS
... documented. 1,2,3,4 All existing literature is by no means sited do to space limitations. It has also been documented that individual chemicals such as friction reducers, corrosion inhibitors, surfactants and clay stabilizers can have a detrimental effect on asphaltene precipitation. 5,6,7 These reactions...
Product(s) added to cartClose Modal