Fig. 10 Reference permeability K xx and porosity field of the formation for the 3D reservoir. Both permeability and porosity show strong heterogeneity in their values. More

Fig. 11 Reference grid for simulation of drilling-induced formation damage. More

Figure 7 Use of reference logs when predicting formation bond More

Figure 1 Synthetic formation model used as input to the forward model and reference to evaluate inversion results at different relative angles and anisotropy ratios. 1 st track: reference track in ft TVD. 2 nd track: formation model sections (see text for description). 3 rd track: resistivity f... More

Fig. 6 Well C1 borehole pressure versus well C2 and well A2 (for reference) formation pressure. More

Fig. 4 3D, seismic and structural map that refers to the top of Castillo Formation. Equidistance: 25 miliseconds. More

Figure 2 Production Diagnostic Plot Shows Formation Linear Flow Behavoir (from reference 10) More

Figure 7 Reference coil when only formation water has been pumped through. No scaling nor gunking has occurred. The picture below the glass coil is a SEM picture of the steel coil More

Figure 11 Reference grid for simulation of drilling induced formation damage More

Figure 12 Simulated MSE by formation for new design bit: field baseline reference (blue), sharp bit model (orange), T1 dull model (gray) More

Figure 5 Distribution of the formation pressure profiles (Pfor) by reference wells. More

Figure 21 Reference Case - MDT Formation Pressure Vs Simulation Pressure More

Fig. 8 Gas saturation contours for the reference case in the S 2 formation on March 01, 2002. More

Fig. 3 Onshore reference section (Well J-1) for Araej Formation in Abu Dhabi. More

Figure 4 Formation Pressure vs. Reference Depth in Reservoirs H3 and H4 More

Figure 8 Formation Pressure vs. Reference Depth in Reservoir J- More