Skip Nav Destination
Search Results for Bleeding core
1-20 of 1011 Search Results for
in Performance Evaluation of a Mature Miscible Gasflood at Prudhoe Bay > SPE Reservoir Evaluation & Engineering
Published: 01 August 2001
Fig. 19 Well 13-06A simulator core shrinkage and bleeding factors. More
Published: 03 April 2000
Fig 19 Well 13-06A simulator core shrinkage and bleeding factors More
Publisher: World Petroleum Congress
Paper presented at the 1st World Petroleum Congress, July 18–24, 1933
Paper Number: WPC-1077
... of the hole, the pressure, the conditions of coring, and the rock type.: "Bleeding" cores have been known to represent both good producing sands and poor sands. Where conditions are favourable for a, drill-stem test, careful estimation of the value of such cores from inspection alone is not essential...
Paper presented at the SPE Production Operations Symposium, February 27–March 1, 1983
Paper Number: SPE-11550-MS
... sleeve or liner modification of the inner core barrel is made of a tough porous polyurethane sponge which is preferentially oil wet. The sponge absorbs any oil preferentially oil wet. The sponge absorbs any oil which bleeds from the core. The sponge opposite the core is analyzed for oil which has bled...
Paper presented at the SPE Europec featured at 82nd EAGE Conference and Exhibition, October 18–21, 2021
Paper Number: SPE-205146-MS
... (for instance, sources of water salinity, filtrate invasion, bleeding by gas liberation and water evaporation). Based on our investigation, we have identified and statistically parameterized 11 key variables to quantify the uncertainty in lab-derived fluid saturation data in sponge cores. The variables...
Paper presented at the SPWLA 62nd Annual Logging Symposium, May 17–20, 2021
Paper Number: SPWLA-2021-0032
..., API gravity, volume Volume of formation water, cc expansion and stress corrections, filtrate invasion, gas bleeding, etc. These input parameters become critical Volume of distilled water, cc when the experiment is not controlled, i.e., the fluid Mass of formation water, g densities inside the core...
Paper presented at the SPE Annual Technical Conference and Exhibition, October 5–8, 1997
Paper Number: SPE-38692-MS
... expansion during core lifting to the surface. Typically, such results are corrected for shrinkage and the resulting value is arbitrarily increased again by a bleeding factor of 10%–15%. There are no published industry correction data to correctly account for flushing and blowdown in conventional cores...
J Pet Technol 36 (06): 1033–1035.
Paper Number: SPE-11441-PA
Published: 01 June 1984
... product 512 is desugared; Crown-Zellerbach product 503 has not been desugared (sugars are removed because they retard the setting of portl and cement). Grout Fluidity and Bleeding. Formulating grouts for injection into rubble is limited by two opposing constraints. Bleeding (separation of a clear...
Paper presented at the SPWLA 61st Annual Logging Symposium, June 24–July 29, 2020
Paper Number: SPWLA-5006
... Sw that does not require a preserved core. However, the method is not exact because the free hydrocarbon-filled porosity within the core pore space is not the same volume as the portion of that free hydrocarbon volume that bleeds from the core as the core is retrieved to surface. The measurements...
J Pet Technol 73 (02): 40–43.
Paper Number: SPE-0221-0040-JPT
Published: 01 February 2021
..., developed proprietary nanoparticle carriers that enhance scale-inhibitor adsorption to the reservoir and control the return rate for extended periods of time. This technology results in less chemical bleed off in the initial flowback and increases the chemical retained in the reservoir, allowing for more...
Paper presented at the International Petroleum Technology Conference, March 26–28, 2013
Paper Number: IPTC-16435-MS
... of the residual oil saturation from conventional cores under-call the actual residual oil saturation due to expulsion of oil (bleeding) and shrinkage of oil as pressure decreases during the removal of core from formation to the surface. There are methods of corrections, but the Sro determination from core...
Terence P. O’Sullivan, Dmitriy Astakhov, Juan Pablo Gómez A., Barry Bennet, Kenneth Bohn, Albina Mutina
Paper presented at the SPWLA 56th Annual Logging Symposium, July 18–22, 2015
Paper Number: SPWLA-2015-PP
... correlation between T 2 and the viscosity-temperature ratio (" µ /T") for a given oil (when plotted on a log-log scale), and that either temperature or solution gas pressure changes will move points along this correlation. Mudlog gas composition, oil bleeding from core, and strong fluorescence on core...
J Pet Technol 72 (06): 22–23.
Paper Number: SPE-0620-0022-JPT
Published: 01 June 2020
... mandate” to further invest in science and technology. The fruits of the approach are funneled into the organization via three core areas: innovation (i.e., research and development), the digital transformation, and sustainability. “One of the key reasons why sustainability reports into the CTO...
Publisher: Petroleum Society of Canada
Paper presented at the Annual Technical Meeting, June 11–14, 1994
Paper Number: PETSOC-94-79
... fractured core information pdpp measurement low permeability fluid dynamics complex reservoir fracture permeability flow in porous media permeability fracture permeability measurement matrix pressure-decay profile permeameter aguilera upstream oil & gas reservoir simulation...
J Pet Technol 19 (06): 759–764.
Paper Number: SPE-1552-PA
Published: 01 June 1967
... of the interval, mud filtrate flushing of the core to residual oil, adjustment of the surface oil content of the core for flow of oil from the core during lifting (hereafter referred to as bleeding), adjustment of the surface oil content of the core for shrinkage and careful core preservation at the surface...
J Pet Technol 29 (01): 31–32.
Paper Number: SPE-5997-PA
Published: 01 January 1977
... .........................(1) where (So)res = average post-waterflood residual oil saturation in the flooded region of the reservoir (So)core = average oil saturation from cores BO = oil formation volume factor at the time of coring E=bleeding factor- proposed to he 1.11. In my opinion. Eq. 1 must be corrected for waterflood...
J Pet Technol 25 (02): 175–185.
Paper Number: SPE-3785-PA
Published: 01 February 1973
... oil saturation of the cores must be adjusted for the bleeding and shrinkage that occur during lifting. Introduction Waterflooding is usually the process chosen for secondary oil recovery. Most tertiary oil recovery prospects are in reservoirs that either have been or are prospects are in reservoirs...
Paper presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, April 14–16, 1997
Paper Number: SPE-38055-MS
... bleeding while tripping the core out of the hole. An alternative explanation for these kicks is presented here. An underbalance condition created while tripping in the hole is proposed. The pressure transients while running in the hole are modeled and it is shown that a combination of reduced hydrostatic...
Paper presented at the ISRM International Symposium - 8th Asian Rock Mechanics Symposium, October 14–16, 2014
Paper Number: ISRM-ARMS8-2014-301
.... Kyogoku Dam is a center core-type rockfill dam of 54 meters in height and with a crown length of 332.5 meters. Ordinary Portland cement or Portland blast-furnace slag cement class B is usually used as the material for dam foundation grouting, however, adoption of fly-ash cement has been examined...
Publisher: Offshore Technology Conference
Paper presented at the Offshore Technology Conference, April 30–May 3, 2007
Paper Number: OTC-18576-MS
... developments, "zero footprint" on environment, extremely long tiebacks, getting more value out of the ground. Although technological research and development is key in enabling these challenges to be solved, operators direct their main attention and capital towards their own core business - exploration, field...
Product(s) added to cartClose Modal