Skip Nav Destination
Search Results for 1.11 Drilling fluids and materials
1-20 of 964 Search Results for
1.11 Drilling fluids and materials
Sultan Alimuddin, Rahul Sukanta Dey, Wanchana Srisai, Catalin Aldea, Kingkarn Kaewpraphan, Kantaphon Temaismithi, Mukesh Maheshwari
Paper presented at the Abu Dhabi International Petroleum Exhibition & Conference, November 9–12, 2020
Paper Number: SPE-203005-MS
... drilling fluids and materials drilling fluid formulation lbf 100 flat rheology system seed mud PTTEP is a national petroleum exploration and production company headquartered in Bangkok that provides a sustainable oil and gas development in Myanmar. In its effort to ramp up gas production...
Paper presented at the SPE/DGS Saudi Arabia Section Technical Symposium and Exhibition, May 15–18, 2011
Paper Number: SPE-149129-MS
... allows for setting the lower completion, cleaning the wellbore, and enabling displacement from drilling fluid to completion fluid in the wellbore in a single trip. On wells where there are concerns over equivalent circulating densities (ECDs), the optimized wellbore solution would include tools...
Paper presented at the SPE North Africa Technical Conference and Exhibition, September 14–16, 2015
Paper Number: SPE-175728-MS
... Abstract Oil-based drilling fluids using a micronized ilmenite (5 µm) as weighting materials are proved to be suitable for HP/HT drilling operations with good rheological properties, low sag tendency, and low filtration volumes, even after heating at 400°F for 16 hours. The objective...
Paper presented at the SPE Western Regional Meeting, April 23–26, 2019
Paper Number: SPE-195302-MS
... solubility drilling fluid selection and formulation Upstream Oil & Gas experiment al moajil MSF completion filter cake injectivity horizontal well drilling fluids and materials completion operation oil-based drilling fluid recipe multistage reservoir barite agent Maximum...
Paper presented at the SPE/IADC Indian Drilling Technology Conference and Exhibition, October 16–18, 2006
Paper Number: SPE-102128-MS
... for minimizing whole mud invasion during trips and gel break circulations. Filtrate not reacting chemically with formation fluid to form insoluble precipitate drilling fluid selection and formulation Upstream Oil & Gas drilling fluids and materials drilling fluid property conventional well...
Mohammed Mehtar, Ramanujam Jeughale, Mohamed Salman, Badar Al-Busafi, Pavel Marinescu, Tijana Kostic
Paper presented at the Abu Dhabi International Petroleum Exhibition and Conference, November 9–12, 2015
Paper Number: SPE-177936-MS
... drilling fluid selection and formulation drilling fluid formulation filtrate invasion recovery contamination drilling fluids and materials ultra-low invasion all-oil hthp fluid loss fluid density drilling fluid chemistry drilling operation core barrel objective water injection...
Paper presented at the IADC/SPE Drilling Conference, February 27–March 2, 1990
Paper Number: SPE-19971-MS
... formulation fluid resonance upstream oil & gas frequency transducer iadc spe 19971 downhole gas detection method drilling fluid property attenuation bandwidth acoustic interferometer barite density 1 resonance peak kg dm3 interferometer drilling fluids and materials injection IADC/SPE...
Paper presented at the SPE Nigeria Annual International Conference and Exhibition, August 2–4, 2021
Paper Number: SPE-207097-MS
... fluids and materials yield point control mud interaction effect shear rate ppe The drilling process is fundamental in the oil and gas industry. It involves combining different unit operations and the technical know-how of synergising them to be carried out safely and economically...
Paper presented at the SPE/IADC Middle East Drilling Technology Conference and Exhibition, January 29–31, 2018
Paper Number: SPE-189310-MS
... as a high-performance, cost-effective viscosifier for BBDF and perhaps, other NADFs. drilling fluid selection and formulation drilling fluid chemistry Upstream Oil & Gas Exhibition organoclay drilling fluid formulation biodiesel emulsion stability drilling fluids and materials viscosity...
Kunjian Wang, Pengfei Liu, Xinxin Hou, Pan Wang, Pei Zhu, Mingxuan Hao, Dejiang Li, Qisheng Tang, Qing Wang, Wenchen Ge, Xu Zeng, Hao Zhang, Shihao Zhang, Kejin Chen
Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 12–14, 2021
Paper Number: SPE-205633-MS
... of waste drilling fluid is reduced by 80%, which is a trade-off between zero discharge and well construction cost. This technology can also be applied in other offshore oilfield which is inevitable as the environmental rules become more and more strict. water management drilling fluids and materials...
Cenk Temizel, Aera Energy, Dayanara Betancourt, Sinem Aktas, Onur Susuz, Ying Zhu, Anuj Suhag, Rahul Ranjith, Aaron Wang
Paper presented at the SPE Asia Pacific Hydraulic Fracturing Conference, August 24–26, 2016
Paper Number: SPE-181824-MS
... differences between different fracture models along with the key parameters and their significance in fracture performance. Fracture treatment designs involve selecting fracturing fluids, additives, proppant materials, injection rate, pump schedule, and fracture dimensions. Although hydraulic fracturing has...
Paper presented at the 12th ISRM Congress, October 16–21, 2011
Paper Number: ISRM-12CONGRESS-2011-200
... with estimated stresses based on overburden. Reservoir Characterization overburden reservoir geomechanics orientation MPa horizontal stress hydraulic fracturing displacement material research station Upstream Oil & Gas Test Location drill hole rock mass in-situ stress stress measurement...
Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, July 9–11, 2012
Paper Number: SPE-155699-MS
... of differential pressure leakage is put forward. drilling fluid selection and formulation enhanced recovery drilling fluids and materials reservoir characterization drilling fluid property upstream oil & gas pore pressure differential pressure leakage drilling fluid formulation circulation...
Publisher: Society of Petroleum Engineers (SPE)
Paper presented at the SPE Annual Technical Conference and Exhibition, September 21–23, 2021
Paper Number: SPE-206279-MS
... ; Linping et.al., 2019). As the polymer size decreases, the particle size of the swollen polymer should also decrease. Introduction enhanced recovery drilling fluid property drilling fluid selection and formulation fracturing materials hydraulic fracturing drilling fluid chemistry flow...
Publisher: Offshore Mediterranean Conference
Paper presented at the Offshore Mediterranean Conference and Exhibition, March 20–22, 2013
Paper Number: OMC-2013-159
... system could be quantified and its performance optimized for future applications. region 2 0 variability drilling fluid selection and formulation drilling fluid management & disposal drilling fluid formulation drilling fluids and materials lubricity field lubricity measurement corrilate...
Paper presented at the Middle East Oil Show, March 11–14, 1995
Paper Number: SPE-29833-MS
... conditions, before going on to field trials with un-proven fluids. Five formulations were investigated. The material ranged from a standard bentonite based fresh water mud to an oil based fluid. The drilling fluid formulations; and their respective properties are presented in Table 1. The samples were...
Paper presented at the SPE Latin American and Caribbean Petroleum Engineering Conference, November 18–20, 2015
Paper Number: SPE-177080-MS
.... Using 3D seismic data and petrophysical information obtained from wells drilled in the area, the structural and the static models have been elaborated. Considering the production history and the behavior of fluid pressure, material balance was applied in order to estimate the original oil in place...
Paper presented at the SPE International Symposium on Oilfield Chemistry, April 13–15, 2015
Paper Number: SPE-173741-MS
... and formulation Upstream Oil & Gas formate crystal TCT drilling fluids and materials metastable phase metastable crystal cesium formate brine drilling fluid chemistry drilling fluid formulation potassium formate formate single salt brine potassium formate brine Brine equilibrium line tct curve...
Paper presented at the SPE Latin American and Caribbean Petroleum Engineering Conference, December 1–3, 2010
Paper Number: SPE-122071-MS
... viscosity cuttings transport drilling fluids and materials suspension particle internal cylinder drill string rotation angular velocity diameter upstream oil & gas experiment image processing reynolds number spe 122071 In the begining of the 20 th century, the industry started...
Paper presented at the SPE European Formation Damage Conference & Exhibition, June 5–7, 2013
Paper Number: SPE-165163-MS
... TABLE 1 DRILLING FLUID COMPOSITION ON LAB SCALE I Material Quantity Units Distilled Water 308 Cc Defoamer 0.33 Cc XC-polymer 1.20 G Biocide 0.17 Cc Starch 2.00 G KCl 97.6 G KOH 0.50 Cc Sodium sulfide 0.25 G CaCO 3 (Coarser) 7.99 G...
Product(s) added to cartClose Modal