A Switching MPD Controller for Mitigating Riser Gas Unloading Events in Offshore Drilling
- Qifan Gu (University of Texas at Austin) | AmirHossein Fallah (University of Texas at Austin) | Adrian Ambrus (NORCE Norwegian Research Centre AS) | Zheren Ma (Quantum Reservoir Impact) | Dongemi Chen (University of Texas at Austin) | Pradeep Ashok (University of Texas at Austin) | Eric van Oort (University of Texas at Austin)
- Document ID
- Society of Petroleum Engineers
- SPE Drilling & Completion
- Publication Date
- June 2020
- Document Type
- Journal Paper
- 201 - 217
- 2020.Society of Petroleum Engineers
- deepwater well control, riser gas unloading, switching control
- 27 in the last 30 days
- 111 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 5.00|
|SPE Non-Member Price:||USD 35.00|
Riser gas unloading events in subsea well construction are hazardous and difficult to control. When a gas influx enters the wellbore and dissolves in nonaqueous fluids (NAFs), it may go unnoticed because the pit gain on the surface may be minimal and remain below the detection threshold when using conventional well control indicators. Once the dissolved gas is circulated up and comes out of the solution at pressure and temperature conditions below the bubblepoint, it can quickly displace a large volume of mud in the riser or the chokeline. When this breaking out of gas occurs at a shallow depth, it leaves little time for the rig crew to react.
In this paper, we present a novel managed pressure drilling (MPD) approach for riser gas unloading control that makes use of a pressurized riser drilling (PRD) controller. The PRD method employs the constant bottomhole pressure (CBHP) controller for normal operations (e.g., drilling and circulation of kick), whereas it offers a more comprehensive way to manage and control a riser gas unloading behavior. The PRD choke controller dynamically applies a backpressure on the dissolved gas–NAF mixture in the riser to delay, minimize, or even prevent the gas breaking out at locations closer to the surface. The control algorithm considers the pressure limits of the riser and of the openhole formations and can adjust for kick uncertainties (e.g., whether the kick is a gas, liquid, or both, its volume and distribution).
The proposed PRD controller consists of three operation modes: pressure control mode, flow control mode, and solubility control mode, with each mode applicable to its corresponding operating condition. The controller can automatically switch among different modes on the basis of the observed kick behavior, thereby gaining the ability to compensate for the limitations of the individual control modes and, more importantly, to deal with kicks agnostically, i.e., independent of their nature. The proposed controller is evaluated by simulating different riser gas unloading scenarios. Here, two distinct cases are given special consideration: (1) the case in which the subsea blowout preventers (BOPs) remain open after the kick passes them and the controller regulates the pressure using the maximum allowable surface pressure (MASP) or downhole fracture gradient as an upper limit and (2) the case in which the subsea BOPs are closed after the kick passes them and the controller regulates the pressure within the riser pressure limits when the kick is circulated to the surface using the riser booster pump.
Simulation results show that the proposed controller can quickly and robustly control the riser gas unloading situations with complicated transient conditions, without fracturing downhole formations or jeopardizing the pressure integrity of the riser. The developed PRD controller aims to help mitigate some of the concerns about riser gas unloading when the dissolved gas is allowed to pass the subsea BOPs and enter the riser and to facilitate the implementation of more automated subsea well control using MPD technology in the foreseeable future.
|File Size||6 MB||Number of Pages||17|
Aarsnes, U., Acikmese, B., Ambrus, A. et al. 2016. Robust Controller Design for Automated Kick Handling in Managed Pressure Drilling. J Process Control 47: 46–57. https://doi.org/10.1016/j.jprocont.2016.09.001.
Ambrus, A., Aarsnes, U., Vajargah, A. K. et al. 2016. Real-Time Estimation of Reservoir Influx Rate and Pore Pressure Using a Simplified Transient Two-Phase Flow Model. J Nat Gas Sci Eng 32: 439–452. https://doi.org/10.1016/j.jngse.2016.04.036.
Ambrus, A., Vajargah, A. K., Ashok, P. et al. 2017. Choke Controller Design for Automated Managed Pressure Drilling with Realistic Operational System Conditions. Paper presented at the AADE National Technical Conference and Exhibition, Houston, Texas, USA, 11–12 April. AADE-17-NTCE-095.
Berthezene, N., de Hemptinne, J.-C., Audibert, A. et al. 1999. Methane Solubility in Synthetic Oil-Based Drilling Muds. J Pet Sci Eng 23 (2): 71–81. https://doi.org/10.1016/S0920-4105(99)00008-X.
Dodge, D. W. and Metzner, A. B. 1959. Turbulent Flow of Non-Newtonian Systems. AIChE J 5: 189–204. https://doi.org/10.1002/aic.690050214.
Epps, S., Pellegrini, T., Valecillos, J. et al. 2016. Managed Pressure Drilling (MPD) Technology Applied to a High Potential Oil/Gas Producing Well Enabled Operator to Drill to Planned Target Depth in an Area of South Texas Where Conventional Drilling Has Been Unsuccessful—A Case History. Paper presented at the SPE/IADC Managed Pressure Drilling and Underbalanced Operations Conference and Exhibition, Galveston, Texas, USA, 12–13 April. SPE-179745-MS. https://doi.org/10.2118/179745-MS.
Fallah, A., Gu, Q., Ma, Z. et al. 2019. An Integrated Thermal and Multi-Phase Flow Model for Estimating Transient Temperature Dynamics During Drilling Operations. Paper presented at the SPE/IADC Drilling International Conference and Exhibition, The Hague, The Netherlands, 5–7 March. SPE-194083-MS. https://doi.org/10.2118/194083-MS.
Fraser, D., Lindley, R., Moore, D. et al. 2014. Early Kick Detection Methods and Technologies. Paper presented at the SPE Annual Technical Conference and Exhibition, Amsterdam, The Netherlands, 27–29 October. SPE-170756-MS. https://doi.org/10.2118/170756-MS.
Godhavn, J. 2010. Control Requirements for Automatic Managed. SPE Drill & Compl 25 (3): 336–345. SPE-119442-PA. https://doi.org/10.2118/119442-PA.
Godhavn, J., Fard, M. P., and Fuchs, P. H. 2005. New Slug Control Strategies, Tuning Rules and Experimental Results. J Process Control 15 (5): 547–557. https://doi.org/10.1016/j.jprocont.2004.10.003.
Gu, Q., Fallah, A., Ambrus, A. et al. 2019. Higher Precision Automated Managed Pressure Drilling Control Achieved through the Addition of a Thermal Model. Paper presented at the International Petroleum Technology Conference, Beijing, China, 26–28 March. IPTC-19326-MS. https://doi.org/10.2523/19326-MS.
Gul, S., Johnson, M., Vajargah, A. K. et al. 2019. A Data Driven Approach to Predict Frictional Pressure Losses in Polymer-Based Fluids. Paper presented at the SPE/IADC Drilling International Conference and Exhibition, The Hague, The Netherlands, 5–7 March. SPE-194132-MS. https://doi.org/10.2118/194132-MS.
Hannegan, D. M. 2005. Managed Pressure Drilling in Marine Environments—Case Studies. Paper presented at the SPE/IADC Drilling Conference and Exhibition, Amsterdam, The Netherlands, 23–25 February. SPE-92600-MS. https://doi.org/10.2118/92600-MS.
Hannegan, D. M. and Fisher, K. 2005. Managed Pressure Drilling in Marine Environments. Paper presented at the International Petroleum Technology Conference, Doha, Qatar, 21–23 November. IPTC-10173-MS. https://doi.org/10.2523/IPTC-10173-MS.
Hannegan, D. M. 2009. Managed-Pressure Drilling. In Advanced Drilling and Well Technology, ed. B. S. Aadnoy, I. Cooper, S. Z. Miska, R. F. Mitchell, and M. L. Payne, Chap. 9.3, 750–764. Richardson, Texas, USA: Society of Petroleum Engineers.
Henry, M., Tombs, M., Duta, M. et al. 2006. Two-Phase Flow Metering of Heavy Oil Using a Coriolis Mass Flow Meter: A Case Study. Flow Meas Instrum 17 (6): 399–413. https://doi.org/10.1016/j.flowmeasinst.2006.07.008.
Herschel, W. H. and Bulkley, R. 1926. Konsistenzmessungen von Gummi-Benzollösungen. Kolloid Z 39: 291–300. https://doi.org/10.1007/BF01432034.
Ishii, M. 1977. One-Dimensional Drift-Flux Model and Constitutive Equations for Relative Motion between Phases in Various Two-Phase Flow Regimes. Technical report, Contract No. W-31-109-ENG-38, US DOE, Argonne, Illinois, USA (October 1977).
James, J. P., Rezmer-Cooper, I. M., and Sørskår, S. K. 1999. MABOPP—New Diagnostics and Procedures for Deep Water Well Control. Paper presented at the SPE/IADC Drilling Conference, Amsterdam, The Netherlands, 9–11 March. SPE-52765-MS. https://doi.org/10.2118/52765-MS.
Jiang, Y., Zhou, Y., Liu, W. et al. 2014. The Analysis of Applications of Micro-Flux Control Drilling Technology in Narrow Density Window Drilling Scenarios. Procedia Eng 73: 352–361. https://doi.org/10.1016/j.proeng.2014.06.209.
Johnson, M., Gul, S., Vajargah, A. K. et al. 2018. Real-Time Friction Factor Monitoring: Characterization of Drag Reduction in Polymer-Based Fluids. Paper presented at the AADE Fluids Technical Conference and Exhibition, Houston, Texas, USA, 10–11 April. AADE-18-FTCE-118.
Kinik, K., Wojtanowicz, A. K., and Gumus, F. 2016. Probabilistic Assessment of the Temperature-Induced Effective Fracture Pressures. SPE Drill & Compl 31 (1): 40–52. SPE-170316-PA. https://doi.org/10.2118/170316-PA.
Lage, A. C. V. M., Nakagawa, E. Y., and Cordovil, A. G. D. P. 1994. Well Control Procedures in Deep Water. Paper presented at the SPE Latin America/Caribbean Petroleum Engineering Conference, Buenos Aires, Argentina, 27–29 April. SPE-26952-MS. https://doi.org/10.2118/26952-MS.
Lee, A. L., Gonzalez, M. H., and Eakin, B. E. 1966. The Viscosity of Natural Gases. J Pet Technol 18 (8): 997–1000. SPE-1340-PA. https://doi.org/10.2118/1340-PA.
Liu, R. P., Fuent, M. J., Henry, M. P. et al. 2001. A Neural Network to Correct Mass Flow Errors Caused by Two-Phase Flow in a Digital Coriolis Mass Flowmeter. Flow Meas Instrum 12 (1): 53–63. https://doi.org/10.1016/S0955-5986(00)00045-5.
Lorentzen, R., Stordal, A., Nævdal, G. et al. 2014. Estimation of Production Rates with Transient Well-Flow Modeling and the Auxiliary Particle Filter. SPE J. 19 (1): 172–180. SPE-165582-PA. https://doi.org/10.2118/165582-PA.
Ma, Z., Vajargah, A. K., Ambrus, A. et al. 2016. Multi-Phase Well Control Analysis during Managed Pressure Drilling Operations. Paper presented at the SPE Annual Technical Conference and Exhibition, Dubai, UAE, 26–28 September. SPE-181672-MS. https://doi.org/10.2118/181672-MS.
Ma, Z., Vajargah, A. K., Ambrus, A. et al. 2017. A Comprehensive Hydraulic Software Package for Drilling Operations. Paper presented at the AADE National Technical Conference and Exhibition, Houston, Texas, USA, 11–12 April. AADE-17-NTCE-108.
Ma, Z., Vajargah, A. K., Chen, D. et al. 2018. Gas Kicks in Non-Aqueous Drilling Fluids: A Well Control Challenge. Paper presented at the IADC/SPE Drilling Conference and Exhibition, Fort Worth, Texas, USA, 6–8 March. SPE-189606-MS. https://doi.org/10.2118/189606-MS.
Monteiro, E. N., Ribeiro, P. R., and Lomba, R. F. T. 2010. Study of the PVT Properties of Gas–Synthetic-Drilling-Fluid Mixtures Applied to Well Control. SPE Drill & Compl 25 (1): 45–52. SPE-116013-PA. https://doi.org/10.2118/116013-PA.
O’Bryan, P. L. and Bourgoyne, A. T. 1990. Swelling of Oil-Based Drilling Fluids Resulting from Dissolved Gas. SPE Drill Eng 5 (2): 149–155. SPE-16676-PA. https://doi.org/10.2118/16676-PA.
Persent, E., Guesnon, J., Leroy, J.-M. et al. 2010. Development of a 14-inch ID High-Pressure Hybrid Riser for SBOP Drilling. Oil Gas Sci Technol 65: 315–330. https://doi.org/10.2516/ogst/2009044.
Ram Babu, D. 1998. Effect of P-ρ-T Behavior of Muds on Loss/Gain During High-Temperature Deep-Well Drilling. J Pet Sci Eng 20 (1–2): 49–62. https://doi.org/10.1016/S0920-4105(98)00003-5.
Razavi, O., Vajargah, A. K., van Oort, E. et al. 2017. Comprehensive Analysis of Initiation and Propagation Pressures in Drilling Induced Fractures. J Pet Sci Eng 149: 228–243. https://doi.org/10.1016/j.petrol.2016.10.039.
Reitsma, D. and Couturier, Y. 2012. New Choke Controller for Managed Pressure Drilling. Proc., IFAC Workshop on Automatic Control in Offshore Oil and Gas Production, Trondheim, Norway, 31 May–June 1, Sec. 45, 223–230.
Schüller, R. B., Solbakken, T., and Selmer-Olsen, S. 2003. Evaluation of Multiphase Flow Rate Models for Chokes under Subcritical Oil/Gas/Water Flow Conditions. SPE Prod & Fac 18 (3): 170–181. SPE-84961-PA. https://doi.org/10.2118/84961-PA.
Skea, A. F. and Hall, A. R. W. 1999. Effects of Gas Leaks in Oil Flow on Single-Phase Flowmeters. Flow Meas Instrum 10 (3): 145–150. https://doi.org/10.1016/S0955-5986(98)00055-7.
Vajargah, A. K. and van Oort, E. 2015. Early Kick Detection and Well Control Decision-Making for Managed Pressure Drilling Automation. J Nat Gas Sci Eng 27 (1): 354–366. https://doi.org/10.1016/j.jngse.2015.08.067.
Vieira, P., Arnone, M., Cook, L. et al. 2008. Constant Bottomhole Pressure: Managed-Pressure Drilling Technique Applied in an Exploratory Well in Saudi Arabia. Paper presented at the SPE/IADC Managed Pressure Drilling and Underbalanced Operations Conference and Exhibition, Abu Dhabi, UAE, 28–29 January. SPE-113679-MS. https://doi.org/10.2118/113679-MS.
Weems, M., Moore, D., and Leach, C. 2016. Managed Pressure Drilling as Well Control in Deepwater GOM: Challenges to Current Modes of Thinking. Paper presented at the SPE/IADC Managed Pressure Drilling and Underbalanced Operations Conference and Exhibition, Galveston, Texas, USA, 12–13 April. SPE-179179-MS. https://doi.org/10.2118/179179-MS.
Yuan, Z., Morrell, D., Sonnemann, P. et al. 2017. Mitigating Gas-in-Riser Rapid Unloading for Deepwater-Well Control. SPE Drill & Compl 32 (2): 105–111. SPE-185179-PA. https://doi.org/10.2118/185179-PA.
Zhou, J., Nygaard, G., Godhavn, J. et al. 2010. Adaptive Observer for Kick Detection and Switched Control for Bottomhole Pressure Regulation and Kick Attenuation during Managed Pressure Drilling. Proc., American Control Conference, Baltimore, Maryland, USA, 30 June–2 July, 3765–3770. https://doi.org/10.1109/ACC.2010.5531551.
Zhou, J., Stamnes, Ø. N., Aamo, O. M. et al. 2011. Switched Control for Pressure Regulation and Kick Attenuation in a Managed Pressure Drilling System. IEEE Trans Control Syst Technol 19 (2): 337–350. https://doi.org/10.1109/TCST.2010.2046517.