Sampling a Stimulated Rock Volume: An Eagle Ford Example
- Kevin T. Raterman (ConocoPhillips) | Helen E. Farrell (Twenty-Sixth Street Consulting) | Oscar S. Mora (ConocoPhillips) | Aaron L. Janssen (ConocoPhillips) | Gustavo A. Gomez (ConocoPhillips) | Seth Busetti (ConocoPhillips) | Jamie McEwen (ConocoPhillips) | Kyle Friehauf (ConocoPhillips) | James Rutherford (ConocoPhillips) | Ray Reid (ConocoPhillips) | Ge Jin (ConocoPhillips) | Baishali Roy (ConocoPhillips) | Mark Warren (ConocoPhillips)
- Document ID
- Society of Petroleum Engineers
- SPE Reservoir Evaluation & Engineering
- Publication Date
- November 2018
- Document Type
- Journal Paper
- 927 - 941
- 2018.Society of Petroleum Engineers
- Hydraulic fracture characterization, Unconventional pilot
- 19 in the last 30 days
- 561 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 5.00|
|SPE Non-Member Price:||USD 35.00|
Between 2014 and 2016, ConocoPhillips drilled five deviated wells adjacent to a multistage, stimulated horizontal producer to sample the physical characteristics of the reservoir stimulation caused by hydraulic fracturing in the Eagle Ford Formation in DeWitt County, Texas. The design, execution, and results of the pilot are described. This pilot establishes the paucity of pre-existing natural fractures in this locale and enables the determination of the spatial characteristics of the stimulation using information derived from the core, cuttings samples, borehole-image logs, tracer logs, microseismic, distributed temperature sensing (DTS)/distributed acoustic sensing (DAS), and pressure data. Results show that stimulation effectively breaks the reservoir rock and makes a complex array of hydraulic fractures that are more closely spaced near the producer. Some fractures, however, extend interwell distances of more than 1,000 ft. The pilot data indicate that abundant proppant transport appears to be limited to distances less than 75 ft from the producer, which suggests that the stimulated rock volume (SRV) might be greater than the volume of rock that can be effectively drained.
|File Size||1 MB||Number of Pages||15|
Branagan, P. T., Peterson, R. E., Warpinski, N. R. et al. 1996. Characterization of a Remotely Intersected Set of Hydraulic Fractures: Results of Intersection Well No. 1-B, GRI/DOE Multi-Site Project. Presented at the SPE Annual Technical Conference and Exhibition, Denver, 6–9 October. SPE-36452-MS. https://doi.org/10.2118/36452-MS.
Cipolla, C. L., Warpinski, N. R., and Mayerhofer, M. J. 2008. Hydraulic Fracture Complexity: Diagnosis, Remediation and Exploitation. Presented at the SPE Asia Pacific Oil and Gas Conference, and Exhibition, Perth, Australia, 20–22 October. SPE-115771-MS. https://doi.org/10.2118/115771-MS.
Fast, R. E., Murer, A. S., and Timmer, R .S. 1994. Description and Analysis of Cored Hydraulic Fractures—Lost Hills Field, Kern County, California. SPE Prod & Fac 9 (2): 107–114. SPE-24853-PA. https://doi.org/10.2118/24853-PA.
Fisher, M. K., Wright, C. A., Davidson, B. M. et al. 2002. Integrating Fracture Mapping Technologies To Optimize Stimulations in the Barnett Shale. Presented at the SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 29 September–2 October. SPE-77441-MS. https://doi.org/10.2118/77441-MS.
Kulander, B. R., Dean, S. L., and Ward B. J. 1990. Fractured Core Analysis: Interpretation, Logging, and Use of Natural and Induced Fractures in Core, AAPG Methods in Exploration Series, No 8. Tulsa: American Association of Petroleum Geologists.
Mahrer, K. D. 1999. A Review and Perspective on Far-Field Hydraulic Fracture Geometry Studies. J. Pet. Sci. Eng. 24 (1): 13–28. https://doi.org/10.1016/S0920-4105(99)00020-0.
Mahrer, K. D., Aud, W. W., and Hansen, J. T. 1996. Far-Field Hydraulic Fracture Geometry: A Changing Paradigm. Presented at the SPE Annual Technical Conference and Exhibition, Denver, 6–9 October. SPE-36441-MS. https://doi.org/10.2118/36441-MS.
Maxwell, S. C., Urbancic, T. I., Steinsberger, N. et al. 2002. Microseismic Imaging of Hydraulic Fracture Complexity in the Barnett Shale. Presented at the SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 29 September–2 October. SPE-77440-MS. https://doi.org/10.2118/77440-MS.
Sheather, S. J. and Jones, M. C. 1991. A Reliable Data-Based Bandwidth Selection Method for Kernel Density Estimation. J. Royal Stat. Soc. B. 53 (3): 683–690. https://www.jstor.org/stable/2345597.
Silverman, B. W. 1986. Density Estimation for Statistics and Data Analysis. London: Chapman and Hall.
Walker, R. N. Jr., Zinno, R. J., Gibson, J. B. et al. 1998. Carthage Cotton Valley Fracture Imaging Project—Imaging Methodology and Implications. Presented at the SPE Annual Technical Conference and Exhibition, New Orleans, 27–30 September. SPE-49194-MS. https://doi.org/10.2118/49194-MS.
Warpinski, N. R. 1991. Hydraulic Fracturing in Tight, Fissured Media. J Pet Technol 43 (2): 146–209. SPE-20154-PA. https://doi.org/10.2118/20154-PA.
Warpinski, N. R. and Teufel, L. W. 1987. Influence of Geologic Discontinuities on Hydraulic Fracture Propagation. J Pet Technol 39 (2): 209–220. SPE-13224-PA. https://doi.org/10.2118/13224-PA.
Warpinski, N. R., Lorenz, J. C., Branagan, P. T. et al. 1993. Examination of a Cored Hydraulic Fracture in a Deep Gas Well (includes associated papers 26302 and 26946). SPE Prod & Fac 8 (3): 150–158. SPE-22876-PA. https://doi.org/10.2118/22876-PA.