Successful Application of Hot-Water Circulation in the Pelican Lake Field: Results and Analyses of the E29 Hot-Water-Injection Pilot
- Kirk Duval (Cenovus Energy) | Dubert Gutiérrez (Cenovus Energy) | Dino Petrakos (Cenovus Energy) | Pierre Ollier (Majus) | Darren Johannson (Majus Canada)
- Document ID
- Society of Petroleum Engineers
- Journal of Canadian Petroleum Technology
- Publication Date
- December 2015
- Document Type
- Journal Paper
- 361 - 371
- 2015.Society of Petroleum Engineers
- Heavy Oil, Insulated Coil tubing, Hot Waterflooding, Hot Water Circulation, Pelican Lake
- 3 in the last 30 days
- 394 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 12.00|
|SPE Non-Member Price:||USD 35.00|
The Pelican Lake field in northern Alberta (Canada) is home to the first successful commercial application of polymer flooding in higher-viscosity oils (i.e., greater than 1,000 cp), which has opened up new opportunities for the development of heavy-oil resources.
The field produces from the Wabiskaw “A” reservoir, which has thin pay (2 to 6 m) and exhibits a significant viscosity gradient across the field, with oil viscosities as low as 600 cp in the existing waterflood and polymer-flood areas to more than 200,000 cp in the current undeveloped “immobile” area. This unique geological feature limits the application of chemical injection to the less-viscous areas of the field and calls for different methods for the heavier accumulations.
As a first step to develop alternative technologies capable of recovering oil from heavier areas of the field not ideal for polymer flooding, a Cenovus-designed hot-water-injection pilot began implementation in June 2011. The hot-water-injection scheme was applied to a transition area in which dead-oil viscosity ranges from 3,000 cp to approximately 15,000 cp. It consisted of one horizontal producer supported by two horizontal hot-water injectors, with an injector/producer distance of 50 m for both injectors, and three vertical observation wells equipped to monitor pressure and temperature between one injector and the producer.
The pilot was operated in three phases. The first phase consisted of a 6-month primary-production period to obtain a baseline of the pilot performance before hot-water injection. The second phase consisted of hot-water injection through the edge injectors. The third phase consisted of hot-water edge injection accompanied by hot-water circulation in the production well as a means to stimulate oil production. One of the features of this stage is the use of an insulated coiled tubing (ICT), which delivers hot water continuously to the toe of the producer and allows continuous stimulation and uninterrupted oil production.
This paper describes the mechanical components of the pilot and discusses the results obtained with an emphasis on the hot-water-circulation process, which has proved to be very effective. Oil production increased from approximately 6 m3/d during the flood stage to more than 25 m3/d during the hot-water-circulation stage and has held relatively steady for more than 2 years.
The data captured have been reconciled with analytical and reservoir-simulation models, and results suggest that the technology may help unlock some of the heavier oil accumulations in the field.
|File Size||2 MB||Number of Pages||11|
Blonz, M. and Ollier, P. 2009. Hot Oil Circulation To Improve Oil Recovery: Results Of The First Pilot. Presented at the International Petroleum Technology Conference, Doha, Qatar, 7–9 December. IPTC-13695-MS. http://dx.doi.org/10.2523/13695-MS.
Buckley, S. E. and Leverett, M. C. 1942. Mechanism of Fluid Displacement in Sands. Transactions of the AIME 146 (1): 107–116. SPE-942107-G. http://dx.doi.org/10.2118/942107-G.
Delamaide, E., Zaitoun, A., Renard, G. et al. 2014. Pelican Lake Field: First Successful Application of Polymer Flooding in a Heavy-Oil Reservoir. SPE Res Eval & Eng 17 (3): 340–354. SPE-165234-PA. http://dx.doi.org/10.2118/165234-PA.
Evans, E. B. 1937. The Viscosity–Temperature Relationships of Hydrocarbons. Presented at the 2nd World Petroleum Congress, Paris, France, 14–19 June.
Gutiérrez, D., Ursenbach, M., Moore, G. et al. 2013. Oil Recovery From Thin Heavy-Oil Reservoirs: The Case of the Combined-Thermal-Drive Pilot in the Morgan Field. J Can Pet Technol 52 (2): 120–130. SPE-150593-PA. http://dx.doi.org/10.2118/150593-PA.
MAJUS. 2015a. Insulated coiled tubing. http://www.majus.co.uk/products/insulated-coiled-tubing (accessed March 2015).
MAJUS. 2015b. TOR: TOR Technology (Thermal Oil Recovery) – Insulated Coiled Tubing. http://www.majus.co.uk/products/tor (accessed March 2015).
Ojeda, S. S. and Parman, D. 2013. Use of Electric Downhole Heaters to Improve Production and Recovery of Heavy, Viscous Oil in California and Venezuela. Presented at the SPE Kuwait Oil and Gas Show and Conference, Kuwait City, Kuwait, 8–10 October. SPE-167347-MS. http://dx.doi.org/10.2118/167347-MS.