Modeling Formation Damage and Completion Geometry in the Gyda Reservoir
- Chris Carpenter (JPT Technology Editor)
- Document ID
- Society of Petroleum Engineers
- Journal of Petroleum Technology
- Publication Date
- February 2015
- Document Type
- Journal Paper
- 126 - 128
- 2015. Society of Petroleum Engineers
- 1 in the last 30 days
- 77 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||Free|
|SPE Non-Member Price:||USD 17.00|
This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 165113, "Modeling Formation Damage and Completion Geometry in an Old Well Enables Better Planning for New Wells: Gyda Development Case Study," by M. Byrne, SPE, and E. Rojas, SPE, Synergy, and V.B. Holst, SPE, Talisman Energy, prepared for the 2013 SPE European Formation Damage Conference and Exhibition, Noordwijk, The Netherlands, 5-7 June. The paper has not been peer reviewed.
This study concerns the mature Gyda reservoir, where some recent production wells have underperformed relative to equivalent initial wells. In particular, a sidetrack to an early successful well had very poor performance on initial startup. Subsequently, the geometry of both the original well and the sidetrack was simulated. In the original well, an attempted hydraulic fracture was assumed to have failed. This assumption was challenged in the model. The model has enabled evaluation of old wells and, more importantly, design of new wells in this mature-reservoir development.
Gyda is a mature oil development in the Norwegian sector of the North Sea. The first production wells were drilled more than 20 years ago. Some recently drilled Gyda wells have not fulfilled production objectives. A numerical 3D model was proposed in order to investigate and understand the flow dynamics and the production potential from the Gyda A19 and A19A wells. This modeling process includes a detailed numerical 3D fluid-flow simulator based on computational fluid dynamics (CFD), which captures the reservoir, well, and completion geometry complexity.
The CFD simulations are used to determine potential explanations for the wells’ performance and lead to stimulation options and development of optimum drilling and completion for future wells. Because Well A-19 is very similar to Well A19A, some conclusions may be derived from the present study that could support the understanding of the productivity behavior of Well A19A.
To achieve the objective, one CFD model of both wells was constructed. Different completion options were provided, including the case of the hydraulically fractured well. Several sensitivity analyses were carried out in order to depict the well potential.
|File Size||130 KB||Number of Pages||3|