Low-Temperature Oxidation of Oils in Terms of SARA Fractions: Why Simple Reaction Models Don't Work
- N.P. Freitag (Saskatchewan Research Council) | B. Verkoczy (Saskatchewan Research Council)
- Document ID
- Petroleum Society of Canada
- Journal of Canadian Petroleum Technology
- Publication Date
- March 2005
- Document Type
- Journal Paper
- 54 - 61
- 2005. Petroleum Society of Canada
- 5.4 Enhanced Recovery, 4.3.3 Aspaltenes, 4.1.5 Processing Equipment, 2.1.3 Sand/Solids Control, 4.1.2 Separation and Treating
- 0 in the last 30 days
- 606 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 12.00|
|SPE Non-Member Price:||USD 35.00|
The low-temperature oxidation (LTO) reactions of the SARA fractions separated from two crude oils were studied in the presence of their reservoir sands at temperatures between 130 and 230 °?C. The results indicated that the usual approach to modelling LTO-the use of a very few single-step Arrhenius-rate equations-could not be made to reflect the observed reaction kinetics. Instead, this investigation found that the following reaction characteristics were needed for accurate reaction modelling: 1) a change in the order of reaction with respect to oxygen concentration from ? to 1 as temperature rises; 2) the repression of a saturates oxidation reaction by other fractions; and, 3) a prominent induction period exhibited by the saturates fraction. The compositions and yields of the ultimate LTO reaction products were measured, and these included relatively stable residues with high oxygen contents. Because the LTO reactions play an important role in enhanced oil recovery by air injection methods, the above information is valuable for the simulation and prediction of these processes.
Enhanced oil recovery processes need to be predictable before they can be seriously considered for widespread field application. One of the main problems limiting the development and application of new process variations for air injection or in situ combustion is that their field performance and consequently their technical success or failure can simply not be predicted with any reliability. The most serious questions frequently hinge upon the nature of stability of the combustion/oxidation zones. Many studies have provided valuable knowledge as to the nature of the related chemical reactions, but the usefulness of proposed reaction models for numerical simulation prediction is still limited.
Three main types of reaction have been found to govern air-injection EOR processes: pyrolysis/coking, low-temperature oxidation, and high-temperature oxidation (combustion). This study was concentrated on the second category of reaction: low-temperature oxidation (LTO).
The free-radical nature of low-temperature oxidation of hydrocarbons has long been known. In a 1958 review, Morton and Bell(1) confirmed that LTO occurs through a free-radical mechanism in which the production of hydroperoxides is an important first step. They also mentioned the role of inhibitors, discussed catalysis by metal surfaces and metallic salts, and described why long induction periods could occur before the onset of significant oxygen consumption was observed.
Initially, most studies of the chemical mechanisms conducted both before and after Morton and Bell's review used pure compounds. The results varied between compounds, and could not be used directly to describe the oxidation of complex mixtures like crude oils in a petroleum reservoir. In 1968, Bousaid and Ramey(2), while investigating high-temperature oxidations, carried out three low-temperature oxidation tests on a heavy oil between 23 and 52 ° C. They reported very low values of oxygen consumption, with rates that were correlated with an activation energy of 53,200 J/ gmol. Later, Dabbous and Fulton(3) published much more extensive results for LTO of two whole oils on crushed Berea sand over the temperature range of 121 to 246 ° C.
|File Size||334 KB||Number of Pages||8|