CO And HS Co-Removal From Natural Gas Using Membrane Contactor Technology
- Athirah Mohd Tamidi (PETRONAS Research Sdn Bhd) | Nor Hafizah Yasin (PETRONAS Research Sdn Bhd)
- Document ID
- Society of Petroleum Engineers
- SPE Asia Pacific Oil & Gas Conference and Exhibition, 17-19 November, Virtual
- Publication Date
- Document Type
- Conference Paper
- 2020. Society of Petroleum Engineers
- 4.1.2 Separation and Treating, 4.1.4 Gas Processing, 4 Facilities Design, Construction and Operation, 4.6 Natural Gas, 4.1 Processing Systems and Design, 4.2.3 Materials and Corrosion, 2 Well completion, 2.6 Acidizing, 4.2 Pipelines, Flowlines and Risers, 4.3.4 Scale, 4.1.5 Processing Equipment
- Co-removal, Design of Experiment, Membrane Contactor, CO2 & H2S
- 11 in the last 30 days
- 12 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 5.00|
|SPE Non-Member Price:||USD 28.00|
Acid gas removal mainly CO2 and H2S from natural gas is an essential treatment process in the oil and gas industry to increase the heating value of sales gas, prevent corrosion of pipeline and process equipment’s and avoid crystallization during the liquefaction process (Ahmad et al., 2010). Among the popular acid gas removal technologies, the amine-based acid gas absorption process that relies on chemical absorption of acid gas into aqueous amine solution followed by thermal regeneration is one of the technologies that is widely used in the oil and gas industry for acid gas treatment (Brau et al., 2017; Yu et al., 2012; Tay et al., 2017). For amine-based acid gas removal technology, contactors play an important role to ensure efficient and economical separation processes. Membrane contactor technology is one of the promising alternatives to existing conventional contactors that provides a large surface area per unit volume, independent gas and liquid flow rate and ease of scale-up for the acid gas absorption process. In this study, the feasibility of using membrane contactor technology for CO2 and H2S co-removal at high pressure was investigated. The effect of operating parameters such as gas flow rate, liquid flow rate and amine concentration on CO2 and H2S removal performance using activated MDEA as liquid absorbent was conducted using the design of experiment approach. Results from experimental runs have shown that the H2S target outlet which is ≤50 ppm was achieved at all operating conditions but not for CO2 outlet. The target CO2 outlet which is 6.5 mol% was only achieved at experimental runs where the condition of gas flowrate is the lowest, liquid flowrate is the highest and amine concentration is the lowest. The results achieved have proven that there is a high potential to use membrane contactor technology for co-removal of CO2 and H2S from natural gas.
|File Size||729 KB||Number of Pages||10|
Brau, J., Neveux, T. and Louis-louisy, M., 2017. Assessment of amine solvent flexibility in the OCTAVIUS project. Energy Procedia, 114(November 2016), pp.1366–1379. Available at: http://dx.doi.org/10.1016/j.egypro.2017.03.1258.
Le Grange, P., Sheilan, M. and Spooner, B., 2017. How to Limit Amine Systems Failures. The Chemical Engineer. Available at: https://www.thechemicalengineer.com/features/how-to-limit-amine-systems-failures/.
Kang, G., Chan, Z.P., Saleh, S.B.M. and Cao, Y., 2017. Removal of high concentration CO2 from natural gas using high pressure membrane contactors. International Journal of Greenhouse Gas Control, 60, pp.1–9. Available at: http://dx.doi.org/10.1016/j.ijggc.2017.03.003.
M Yusof, S.M. ., 2019. Novel continuous ultrasonic contactor system for CO2 absorption: Parametric and optimization study. Journal of Industrial and Engineering Chemistry, 4640. Available at: https://doi.org/10.1016/j.jiec.2019.06.054.
Wanek, R., 2011. Monitoring H2S to Meet New Exposure Standards. Occupational Health & Safety. Available at: https://ohsonline.com/articles/2011/09/01/monitoring-h2s-to-meet-new-exposure-standards.aspx.