Visualization of Polymer Retention Mechanisms in Porous Media Using Microfluidics
- Antonia Sugar (King Abdullah University of Science & Technology) | Maged F. Serag (King Abdullah University of Science & Technology) | Victor A. Torrealba (King Abdullah University of Science & Technology, now at Chevron Corp.) | Ulrich Buttner (Nanofabrication Core Lab, King Abdullah University of Science & Technology) | Satoshi Habuchi (King Abdullah University of Science & Technology) | Hussein Hoteit (King Abdullah University of Science & Technology)
- Document ID
- Society of Petroleum Engineers
- SPE Europec featured at 82nd EAGE Conference and Exhibition, 8-11 December, Amsterdam, The Netherlands
- Publication Date
- Document Type
- Conference Paper
- 2020. Society of Petroleum Engineers
- 5.4 Improved and Enhanced Recovery, 5.1 Reservoir Characterisation, 5.4 Improved and Enhanced Recovery, 5.1 Reservoir Characterisation, 1.8 Formation Damage, 1.8 Formation Damage, 5.3.6 Chemical Flooding Methods (e.g., Polymer, Solvent, Nitrogen, Immiscible CO2, Surfactant, Vapex), 4.3.4 Scale
- microfluidics, Polymer flood, Chemical EOR, formation damage, entrapment
- 57 in the last 30 days
- 57 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 5.00|
|SPE Non-Member Price:||USD 28.00|
Understanding polymer transport through porous media is key to successful field implementations, including well conformance control and EOR processes. Polymer retention is typically assessed indirectly through its effect on pressure drops and effluent concentrations. Microfluidic techniques represent convenient tools to observe and quantify polymer retention in porous media. In this paper, we demonstrate how a soft-lithography microfluidics protocol can be used to gain insights into polymer transport mechanisms through rocks.
The design of the microfluidic chips honors typical pore-size distributions of oil-bearing conventional reservoir rocks, with pore-throats ranging from 2 to 10 μm. The fabrication technology enables the design transfer on a silicon wafer substrate using photolithography. The etched wafer holding the negative pattern of the pore-network served as a mold for building the microfluidics chip body out of polydimethylsiloxane (PDMS). The oxygen plasma bonding of the PDMS to a thin glass slide resulted in a sealed microfluidic chip, conceptually referred to as "Reservoir-on-a-Chip". We conduct single-phase polymer flooding experiments on the designed chips to understand how polymer-rock interactions impact polymer transport behavior in rocks. These experiments allow for polymer transport visualization at the molecule-scale owing to the use of polymer tagging and single-molecule tracking techniques.
This study presents, for the first time, a direct visualization of polymer retention mechanisms in porous media. We identified three mechanisms leading to polymer retention: adsorption, mechanical entrapment, and hydrodynamic retention. Polymer adsorption on the chip surfaces resulted in flow conductivity reduction in specific pathways and complete blockage in others, inducing alterations in the flowpaths. This mechanism occurred almost instantaneously during the first minutes of flow then, dramatically diminished as adsorption was satisfied. In addition to static adsorption, flow-induced adsorption (entrapment) was also distinguished from the binding of flowing polymer molecules to the already adsorbed polymer layer. Evidence of polymer desorption was observed, which consents with the presumed reversibility character of polymer retention mechanisms. The narrowest channels along with the reduced area due to adsorption, created favorable conditions for polymer entrapment. Both mechanical and hydrodynamic trapped polymers were successfully imaged. These phenomena led to polymer clogging of the porous network, which is one of the major concerns for operational aspects of polymer flooding processes.
Better understanding and quantification of polymer retention in porous media can help to make better decisions related to field-scale implementations of polymer-based processes in the subsurface. In this study, we used a soft-lithography fabrication technique and single-molecule imaging, to show, for the first time, polymer transport insights at the molecule- and pore-scales. This approach opens a new avenue to improve our understanding of the first principals of polymer retention while flowing through porous media.
|File Size||1 MB||Number of Pages||18|
Al-Hajri, Sameer, Syed Mahmood, Ahmed Abdulrahman, Hesham Abdulelah, Saeed Akbari, and Nabil Saraih. 2019. "An Experimental Study on Hydrodynamic Retention of Low and High Molecular Weight Sulfonated Polyacrylamide Polymer." Polymers 11 (9): 1453. https://doi.org/10.3390/polym11091453.
Al-Hajri, Sameer, Syed M. Mahmood, Hesham Abdulelah, and Saeed Akbari. 2018. "An Overview on Polymer Retention in Porous Media." Energies 11 (10). https://doi.org/10.3390/en11102751.
Barreau, Patrick, Henri Bertin, Didier Lasseux, Philippe Glénat, and Alan Zaitoun. 1997. "Water Control in Producing Wells: Influence of an Adsorbed-Polymer Layer on Relative Permeabilities and Capillary Pressure." SPE Reservoir Engineering (Society of Petroleum Engineers) 12 (4): 234–39. https://doi.org/10.2118/35447-PA.
Barrufet, M.A., and L. Ali. 1994. "Modification of Relative Permeability Curves by Polymer Adsorption." In SPE Latin America/Caribbean Petroleum Engineering Conference. Society of Petroleum Engineers. https://doi.org/10.2118/27015-MS.
Broseta, D., F. Medjahed, J. Lecourtier, and M. Robin. 1995. "Polymer Adsorption/Retention in Porous Media: Effects of Core Wettability and Residual Oil." SPE Advanced Technology Series 3 (1): 103–12. https://doi.org/10.2118/24149-pa.
Browne, Christopher A., Audrey Shih, and Sujit S. Datta. 2019. "Pore-Scale Flow Characterization of Polymer Solutions in Microfluidic Porous Media" 1903944: 1–18. https://doi.org/10.1002/smll.201903944.
Chauveteau, G., and N. Kohler. 1974. "Polymer Flooding: The Essential Elements for Laboratory Evaluation." In SPE Improved Oil Recovery Symposium. Society of Petroleum Engineers. https://doi.org/10.2118/4745-MS.
Cohen, Yoram, and F. R. Christ. 1986. "Polymer Retention and Adsorption in the Flow of Polymer Solutions through Porous Media." SPE Reservoir Engineering (Society of Petroleum Engineers) 1 (2): 113–18. https://doi.org/10.2118/12942-PA.
Dominguez, J. G., and G. P. Willhite. 1977. "Retention and Flow Characteristics of Polymer Solutions in Porous Media." Soc Pet Eng J 17 (2): 111–21. https://doi.org/10.2118/5835-pa.
Ghahremani, Hossein, Sina Mobaraki, Seyyed Shahram Khalilinezhad, and Khosrow Jarrahian. 2018. "An Experimental Study of the Performance of Low-Molecular Weight Polymer for Enhanced Heavy Oil Recovery in a Heterogeneous Media." Geosystem Engineering 21 (2): 95–102. https://doi.org/10.1080/12269328.2017.1385424.
Gogoi, Sekhar, and Subrata Borgohain Gogoi. 2019. "Review on Microfluidic Studies for EOR Application." Journal of Petroleum Exploration and Production Technology. https://doi.org/10.1007/s13202-019-0610-4.
Gundogar, A.S., C.M. Ross, S. Akin, and A.R. Kovscek. 2016. "Multiscale Pore Structure Characterization of Middle East Carbonates." Journal of Petroleum Science and Engineering 146 (October): 570–83. https://doi.org/10.1016/j.petrol.2016.07.018.
Hoteit, Hussein, Dennis Alexis, Olaoluwa O. Adepoju, Adwait Chawathe, and Taimur Malik. 2016. "Numerical and Experimental Investigation of Polymer-Induced Resistance to Flow in Reservoirs Undergoing a Chemical Flood." In Proceedings - SPE Annual Technical Conference and Exhibition. Vol. 2016-Janua. Society of Petroleum Engineers (SPE). https://doi.org/10.2118/181720-ms. "Https://Fiji.Sc/." n.d.
Huang, Y., and K.S. Sorbie. 1993. "Scleroglucan Behavior in Flow Through Porous Media: Comparison of Adsorption and In-Situ Rheology With Xanthan." In SPE International Symposium on Oilfield Chemistry. Society of Petroleum Engineers. https://doi.org/10.2118/25173-MS.
Huh, C., E.A. Lange, and W.J. Cannella. 1990. "Polymer Retention in Porous Media." In SPE/DOE Enhanced Oil Recovery Symposium. Society of Petroleum Engineers. https://doi.org/10.2118/20235-MS.
Jennings RR, Rogers JH, and West TJ. 1971. "Factors Influencing Mobility Control by Polymer Solutions." JPT, Journal of Petroleum Technology 23: 391–401. https://doi.org/10.2118/2867-pa.
Lacey, Mike, Cathy Hollis, Mart Oostrom, and Nima Shokri. 2017. "Effects of Pore and Grain Size on Water and Polymer Flooding in Micromodels." Energy and Fuels 31 (9): 9026–34. https://doi.org/10.1021/acs.energyfuels.7b01254.
Lakatos, I, J Lakatos-Szabó, and J Tóth. 1981. "Factors Influencing Polyacrylamide Adsorption in Porous Media and Their Effect on Flow Behavior." In Surface Phenomena in Enhanced Oil Recovery, edited by Dinesh O Shah, 821–42. Boston, MA: Springer US. https://doi.org/10.1007/978-1-4757-0337-5_37.
Lotfollahi, Mohammad, Rouhi Farajzadeh, Mojdeh Delshad, Khalil Al-Abri, Bart M. Wassing, Rifaat Mjeni, Kamran Awan, and Pavel Bedrikovetsky. 2015. "Mechanistic Simulation of Polymer Injectivity in Field Tests." In Society of Petroleum Engineers - SPE Asia Pacific Enhanced Oil Recovery Conference, EORC 2015, 1079–1106. Society of Petroleum Engineers. https://doi.org/10.2118/174665-pa.
Marker, John M. 1973. "Dependence of Polymer Retention on Flow Rate." Journal of Petroleum Technology 25(11): 1307–8. https://doi.org/10.2118/4423-pa.
Meybodi, Hamid Emami, Riyaz Kharrat, and Xiaoqi Wang. 2011. "Study of Microscopic and Macroscopic Displacement Behaviors of Polymer Solution in Water-Wet and Oil-Wet Media." Transport in Porous Media 89 (1): 97–120. https://doi.org/10.1007/s11242-011-9754-5.
Mungan, N., F.W. Smith, and J.L. Thompson. 1966. "Some Aspects of Polymer Floods." Journal of Petroleum Technology 18 (09): 1143–50. https://doi.org/10.2118/1628-pa.
Mungan, Necmettin. 1969. "Rheology and Adsorption of Aqueous Polymer Solutions." Journal of Canadian Petroleum Technology 8 (02): 45–50. https://doi.org/10.2118/69-02-01.
Rashidi, M., S. Sandvik, A. M. Blokhus, and A. Skauge. 2009. "Static and Dynamic Adsorption of Salt Tolerant Polymers." In 15th European Symposium on Improved Oil Recovery 2009, 620–32. https://doi.org/10.3997/2214-4609.201404862.
Santoso, Ryan, Victor Torrealba, and Hussein Hoteit. 2020. "Investigation of an Improved Polymer Flooding Scheme by Compositionally-Tuned Slugs." Processes 2020, Vol. 8, Page 197 8 (2): 197. https://doi.org/10.3390/PR8020197.
Seright, R. S. 2016. "How Much Polymer Should Be Injected during a Polymer Flood?" In SPE - DOE Improved Oil Recovery Symposium Proceedings. Vol. 2016-January. Society of Petroleum Engineers (SPE). https://doi.org/10.2118/179543-ms.
———. 2017. "How Much Polymer Should Be Injected during a Polymer Flood? Review of Previous and Current Practices." In SPE Journal, 22:1–18. Society of Petroleum Engineers. https://doi.org/10.2118/179543-pa.
Seright, R. S., Mac Seheult, and Todd Talashek. 2009. "Injectivity Characteristics of EOR Polymers." In SPE Reservoir Evaluation and Engineering, 12:783–92. Society of Petroleum Engineers. https://doi.org/10.2118/115142-PA.
Sheng, James J. 2011. Modern Chemical Enhanced Oil Recovery. Modern Chemical Enhanced Oil Recovery. Elsevier Inc. https://doi.org/10.1016/C2009-0-20241-8.
Smith, Frank W. 1970. "The Behavior of Partially Hydrolyzed Polyacrylamide Solutions in Porous Media." Journal of Petroleum Technology 22 (02): 148–56. https://doi.org/10.2118/2422-pa.
Sorbie, K. S. 1991. Polymer-Improved Oil Recovery. Polymer-Improved Oil Recovery. Springer Netherlands. https://doi.org/10.1007/978-94-011-3044-8.
Sorbie, K.S., and R.S. Seright. 1992. "Gel Placement in Heterogeneous Systems With Crossflow." In SPE/DOE Enhanced Oil Recovery Symposium. Society of Petroleum Engineers. https://doi.org/10.2118/24192-MS.
Szabo, M. T. 1975. "Some Aspects of Polymer Retention in Porous Media Using a C14 Tagged Polyacrylamide." In Polyelectrolytes and Their Applications, 287–337. Dordrecht: Springer Netherlands. https://doi.org/10.1007/978-94-010-1783-1_19.
Szabo, Miklos T. 1972. "Molecular and Microscopic Interpretation of the Flow of Hydrolyzed Polyacrylamide Solution Through Porous Media." In Fall Meeting of the Society of Petroleum Engineers of AIME. Society of Petroleum Engineers. https://doi.org/10.2118/4028-MS.
Torrealba, V. A., and H. Hoteit. 2019. "Improved Polymer Flooding Injectivity and Displacement by Considering Compositionally-Tuned Slugs." Journal of Petroleum Science and Engineering 178 (July): 14–26. https://doi.org/10.1016/j.petrol.2019.03.019.
Townsend, Wayne R., and Steven A. Becker. 1977. "Polymer Use in Calcareous Formations." In SPE Permian Basin Oil and Gas Recovery Conference. Society of Petroleum Engineers. https://doi.org/10.2118/6382-MS.
Wang, Zhaoyi, Dan Voicu, Ling Tang, Wei Li, and Eugenia Kumacheva. 2015. "Microfluidic Studies of Polymer Adsorption in Flow." Lab on a Chip 15 (9): 2110–16. https://doi.org/10.1039/c5lc00241a.
Zaitoun, A., and N. Kohler. 1988. "Two-Phase Flow Through Porous Media: Effect of an Adsorbed Polymer Layer." In SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers. https://doi.org/10.2118/18085-MS.
Zhang, Guoyin, and R. S. Seright. 2013. "Effect of Concentration on HPAM Retention in Porous Media." In Proceedings - SPE Annual Technical Conference and Exhibition, 3:2265–75. https://doi.org/10.2118/166265-ms.
———. 2015a. "Hydrodynamic Retention and Rheology of EOR Polymers in Porous Media." In Proceedings - SPE International Symposium on Oilfield Chemistry, 1:266–80. Society of Petroleum Engineers (SPE). https://doi.org/10.2118/173728-ms.
Zhao, Juan, Hongfu Fan, Qing You, and Yi Jia. 2017. "Distribution and Presence of Polymers in Porous Media." Energies 10 (12). https://doi.org/10.3390/en10122118.