Identification and Remediation of High Water Cut Stages in Multi-Stage Hydraulically Fractured Wells: A Case Study in the Midale Formation
- John Jenkins (Burgess Creek Exploration) | Charles Wrightson (Lab Site Inc.) | Alexander Lafreniere (Lab Site Inc.) | Matt Hogg (NCS Multistage)
- Document ID
- Society of Petroleum Engineers
- SPE Canada Unconventional Resources Conference, 29 September - 2 October, Virtual
- Publication Date
- Document Type
- Conference Paper
- 2020. Society of Petroleum Engineers
- 4 Facilities Design, Construction and Operation, 2.5.2 Fracturing Materials (Fluids, Proppant), 5.4.1 Waterflooding, 4.1 Processing Systems and Design, 2.4.1 Fracture design and containment, 2 Well completion, 3 Production and Well Operations, 4.1.2 Separation and Treating, 3 Production and Well Operations, 2.4 Hydraulic Fracturing, 5 Reservoir Desciption & Dynamics, 3 Production and Well Operations, 5.6.5 Tracers, 3.3.1 Production Logging, 5.4 Improved and Enhanced Recovery, 5.6 Formation Evaluation & Management, 3.3 Well & Reservoir Surveillance and Monitoring
- Closable Sleeves, Multi-cycle Sleeves, Midale, High Water Cut, Water Tracer
- 7 in the last 30 days
- 55 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 5.00|
|SPE Non-Member Price:||USD 28.00|
A new stage-by-stage analytical framework to identify and control high water influx stages in horizontal wells was successfully used in a multi-layer reservoir in Southeast Saskatchewan, Canada. The wells of interest were drilled in the Midale formation and hydraulically fractured through coil with cemented liners using a borate cross-linked guar gellant. The objective of the project was to develop a robust method to aggregate and analyze multidisciplinary data to identify stages with prolific water inflow and employ multi-cycle closeable sleeves to isolate them. When the correct data is available this framework can be applied at the time of completion to improve well economics through reduced lifting and disposal costs. A multivariate approach is necessary to begin to understand flow per stage in the absence of production logging.
This framework involves collecting all available data: geological, geophysical, raw data-van feeds, pressure signatures, frac fluid viscosity profiles, break times, production and tracer concentrations to build a model for targeting sleeve closures. Data collected through on-site laboratories during the hydraulic fracturing treatment allow early identification of stages for further analysis. Stages where full breaking of frac fluids under reservoir conditions is not observed are identified as candidates for possible intervention. High frac fluid viscosities have the potential to increase fracture height growth and connect the wellbore to layers that have mobile water, depending on fracture height growth limiting mechanisms (Fisher, M. K. et al 2012). Particulate water tracers allow for water inflow to be uniquely attributed to individual stages, where higher concentrations are associated with higher inflow. Combined with pressure signatures and initial swabbing data, this technique can allow the operator to better optimize the well from day one. Production analysis before and after closing sleeves serves as the ultimate score-card for this framework.
Mitigation of unwanted water influx was achieved using this framework to shut in certain stages early in the well's life. On-site quality control, detailed data collection during hydraulic fracturing, tracer concentrations and initial swabbing provided the necessary signals. Closeable sleeves permitted the fractures to heal immediately after the completion, but also allowed for the optionality to mitigate high water inflow if it was identified. This paper details the results from a well, where the water production decreased by approximately 30% while the oil rate increased.
This framework allows for real-time data driven decision making. This enables significant efficiency gains in completion and intervention costs, equipment sizing, facility infrastructure, and lifting costs. This is accomplished through combining multiple datasets, including detailed on-site and after-the-fact frac analysis and solid particulate water tracers to leverage closeable sleeve technology. Potential areas for further applications of this framework include infill drilling in legacy waterfloods or when drilling wells in close vertical proximity to aquifers. This framework is most applicable when attempting to optimize fracture designs when working in new areas and new reservoirs.
|File Size||1 MB||Number of Pages||20|
Camilleri, L. A. P., & Macdonald, J. (2010, January 1). How 24/7 Real-Time Surveillance Increases ESP Run Life and Uptime. Society of Petroleum Engineers. doi: 10.2118/134702-MS
Fisher, M. K., & Warpinski, N. R. (2011, January 1). Hydraulic Fracture-Height Growth: Real Data. Society of Petroleum Engineers. doi: 10.2118/145949-MS
Groulx, B., Gouveia, J., & Chenery, D. (2017, February 15). Multivariate Analysis Using Advanced Probabilistic Techniques for Completion Design Optimization. Society of Petroleum Engineers. doi: 10.2118/185077-MS
Jones, M., & LaRue, J. (2019, January 29). Wellbore Placement Optimization Using Particulate Oil-Soluble Tracers. Society of Petroleum Engineers. doi: 10.2118/194356-MS
Nolte, K. G. (1979, January 1). Determination Of Fracture Parameters From Fracturing Pressure Decline. Society of Petroleum Engineers. doi: 10.2118/8341-MS
Pearson, C. M., Griffin, L., & Chikaloff, J. (2014, February 4). Measuring Field Supplied Proppant Conductivity: Issues Discovered in an Operator. Society of Petroleum Engineers. doi: 10.2118/168641-MS
Prabhu, R., Hutchins, R., & Makarychev-Mikhailov, S. (2016, February 24). Evaluating Damage to the Proppant Pack from Fracturing Fluids Prepared with Saline Water. Society of Petroleum Engineers. doi: 10.2118/179029-MS
Roussel, N. P. (2017, January 24). Analyzing ISIP Stage-by-Stage Escalation to Determine Fracture Height and Horizontal-Stress Anisotropy. Society of Petroleum Engineers. doi: 10.2118/184865-MS
Salman, A., Kurtoglu, B., & Kazemi, H. (2014, September 30). Analysis of Chemical Tracer Flowback in Unconventional Reservoirs. Society of Petroleum Engineers. doi: 10.2118/171656-MS
Swain, C., Kozelj, C., McArthur, K., MacArthur, N., Stadnyk, S., & Powell, J. (2017, February 15). Evaluation of Downhole Multi-Cycle Sleeve Technology for Re-Frac Completions in Southwest Manitoba. Society of Petroleum Engineers. doi: 10.2118/185042-MS