Application of High Temperature Coatings for Near-Surface Corrosion Mitigation on SAGD Wells
- Isaac Khallad (ConocoPhillips) | Mohamad Habib (ConocoPhillips) | Vincenzo Savino (ConocoPhillips)
- Document ID
- Society of Petroleum Engineers
- SPE Thermal Well Integrity and Design Symposium, 19-21 November, Banff, Alberta, Canada
- Publication Date
- Document Type
- Conference Paper
- 2019. Society of Petroleum Engineers
- coatings, corrosion, near-surface, SAGD, high temperature
- 2 in the last 30 days
- 102 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 5.00|
|SPE Non-Member Price:||USD 28.00|
Near-surface casing corrosion has been observed to occur on operating steam-assisted gravity drainage (SAGD) wells in the Surmont field. The corrosion issue could pose risks to containment assurance and have negative implications on well economics throughout the life cycle. This paper discusses how the corrosion was first identified and then successfully mitigated using a high temperature coating solution on the production casing. The methodology used for coating testing, evaluation, and selection is also discussed.
A two-tiered testing program was developed to qualify suitable coatings for the Surmont application. Eleven coating systems from various suppliers were first tested in the lab in a screening exercise to identify the best-in-class coatings for further evaluation. The top six performing coatings were then tested in the field environment to complete the evaluation. Coating performance was evaluated using a series of standard test methods.
Out of the eleven candidate coatings, only two coatings qualified for the high temperature application in Surmont. These coatings are expected to provide long-term corrosion protection of the production casing at an optimized cost. One of these two coatings was successfully applied on an operating well and has provided reliable corrosion protection after four years of service.
The methodology discussed in this paper for coating evaluation and application has been successfully implemented in the Surmont field. The findings from this work can be used to mitigate near-surface corrosion which will result in improved containment assurance and well economics.
|File Size||20 MB||Number of Pages||15|
Butler, R.M. 1998. SAGD Comes of AGE! Journal of Canadian Petroleum Technology. Vol 37, No 7, 9-12, (July 1998) https://doi.org/10.2118/98-07-DA
ConocoPhillips Canada. 2019. Oil Sands. http://www.conocophillips.ca/who-we-are/our-operations/assets/ (accessed June 2019)
Dethlefs, J.C., Blount, C.G., and Bollinger, J.C. 2008. Near-Surface External Casing Corrosion in Alaska: Cause and Mitigation. Presented at the 2006 SPE Western Regional Meeting, Anchorage, Alaska, 8-10 May. SPE-100432-PA. https://doi.org/10.2118/100432-PA
Naval Surface Treatment Center. 2019. Epoxy and High-Solids Coatings. http://www.nstcenter.biz/navy-preservation-resources/coatings-guidance/epoxy-paints/ (accessed August 2019)