A Utica Case Study: The Impact of Permeability Estimates on History Matching, Fracture Length, and Well Spacing
- Garrett Fowler (ResFrac Corporation) | Mark McClure (ResFrac Corporation) | Craig Cipolla (Hess Corporation)
- Document ID
- Society of Petroleum Engineers
- SPE Annual Technical Conference and Exhibition, 30 September - 2 October, Calgary, Alberta, Canada
- Publication Date
- Document Type
- Conference Paper
- 2019. Society of Petroleum Engineers
- Optimization, DFIT, Permeability, Utica, Well spacing
- 277 in the last 30 days
- 277 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 9.50|
|SPE Non-Member Price:||USD 28.00|
Maximizing economic performance in shale requires optimal selection of well and cluster spacing, among other parameters. Reservoir engineering calculations can be used to optimize spacing, but these calculations are impacted by uncertainties in input parameters. System permeability is particularly important and difficult to measure. Diagnostic Fracture Injection Tests (DFIT's) are often used to estimate permeability because they provide a direct, in-situ measurement. However, in recent work, it was shown that conventional DFIT interpretation techniques can overestimate permeability in gas shale by two orders of magnitude. In this study, the impact of the permeability estimate is demonstrated using a dataset from the Utica/Point Pleasant. Production data is history matched with models assuming high and low permeability. It is possible to history match both models because of non-uniqueness between fracture area and permeability. Sensitivity analysis simulations are performed to assess the impact of well and cluster spacing on net present value. Relative to the high permeability model, the low permeability model has a greater optimal well spacing and a tighter optimal cluster spacing. The comparison shows that improved accuracy in the permeability estimate significantly improves economic performance. The low permeability model has much earlier production interference than the high permeability model because the low permeability model requires greater effective fracture length to match production. This is consistent with the operator's experience that outer wells outproduce inner wells within weeks or months from the start of production.
|File Size||946 KB||Number of Pages||15|
Jha, H. S., & Lee, W. J. (2017, July 24). Problems With Application of Material Balance Time to Transient Flow Data in Diagnostic Plots. Unconventional Resources Technology Conference. doi:10.15530/URTEC-2017-2697627
McClure, M., and Kang, C., 2018. ResFrac Technical Writeup. https://arxiv.org/abs/1804.02092.
McClure, Mark,Vidya Bammidi,Craig Cipolla,Dave Cramer,Lucas Martin,Alexei A Savitski,Dave Sobernheim, and Kate Voller. 2019. A Collaborative Study on DFIT Interpretation: Integrating Modeling, Field Data, and Analytical Techniques. Paper presented at the Unconventional Resources Technology Conference, Denver, Colorado.