Rock Mechanical Characterization of Unconventional Source Rocks
- Ji Soo Lee (Aramco Services Company: Aramco Research Center - Houston) | David Jacobi (Aramco Services Company: Aramco Research Center - Houston) | Zainab Alnajar (Stony Brook University)
- Document ID
- Society of Petroleum Engineers
- SPE Middle East Oil and Gas Show and Conference, 18-21 March, Manama, Bahrain
- Publication Date
- Document Type
- Conference Paper
- 2019. Society of Petroleum Engineers
- 2.4 Hydraulic Fracturing, 2 Well completion, 5 Reservoir Desciption & Dynamics, 5.1 Reservoir Characterisation, 2.4.1 Fracture design and containment, 5.1.1 Exploration, Development, Structural Geology, 3 Production and Well Operations, 1.6.9 Coring, Fishing, 1.6 Drilling Operations
- strength, mineralogy, hydraulic fracturing, source rock, unconventional
- 2 in the last 30 days
- 200 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 5.00|
|SPE Non-Member Price:||USD 28.00|
Rock strength is an important property to measure for determining its effect on drilling, wellbore stability, and potential well completions associated with hydraulic fracturing of unconventional reservoirs. The industry traditionally relies on elastic moduli measured from core plugs to determine the stress anisotropy to predict the extent of hydraulic fractures. This provides some estimate of the expected stimulated rock volume in unconventional reservoirs. Rock strength however based on the finding of this study could also be a factor that needs to be considered for designing hydraulic fracturing plans to stimulate production from the rock volume. However, rock strength is difficult to measure in highly laminated source rocks comprising unconventional reservoirs. The existence of weak, horizontal bedding planes within the laminated rock fabric creates anisotropy that influences the rock strength values obtained. Moreover, drilling and extracting intact horizontal, vertical, and diagonal core plugs to test the effects of anisotropy on the rock strength is difficult to achieve. Often, the plugs fracture during extraction due to the laminated fabric. To compensate for the challenge of extracting intact core plugs from these lithofacies, this study proposes that rock strength can be estimated without the need of extracting core plugs. Instead, a new method is demonstrated where non-destructive rebound hardness measurements are collected across a specifically gridded, slabbed rock surface to provide an estimate of the rock strength. The collected rebound hardness values are converted into unconfined compressive strength values using an empirical algorithm. The empirical algorithm was developed using unconfined compressive strength values measured from core plugs correlated to rebound hardness numbers measured from the face of those same core plugs. The derived unconfined compressive strength values are then used to represent the source rock's mechanical characteristics which can be presented as a contour map across the surface. These results have been correlated to the mineralogy of the rock surface, quantified and mapped using micro-X-ray Fluorescence elemental maps. Differences in unconfined compressive rock strength can then be correlated to the changing mineral content of the rock surface. This non-destructive estimation of rock strength was conducted to address the challenge of relating core scale measurments to reservoir scaled analysis to improve hydraulic fracturing designs in unconventional source rocks.
|File Size||2 MB||Number of Pages||17|
Tissot, B.P. and Welte, D.H. 1978. Petroleum Formation and Occurrence: A New Approach to Oil and Gas Exploration. Ch.1. Diagenesis, Catagenesis and Metagenesis of Organic Matter. p.69-73. Springer-Verlag Berlin Heidelberg 1979. ISBN-13:978-3-642-96448-0. e-ISBN-13:978-3-642-96446-6. http://dx.doi.org/10.1007/978-3-642-96446-6
Roberts L.N.R., Lewan, M.D., and Finn, T.M. 2005. U.S. Geological Survey Digital Data Series DDS-60-D. Ch.3 Burial history, thermal maturity, and oil and gas generation history of petroleum systems in the Southwestern Wyoming Province, Wyoming, Colorado and Utah. U.S. Geologic Servey, Denver, Colorado: Version 1, 2005. ISBN=0-607-99027-9.
Simonson, E.R., Abou-Sayed, A.S., and Clifton, R.J. 1976. Containment of massive hydraulic fractures. In Proc. of the SPE-AIME 51st Annual Fall Technical Conference and Exhibition, held in New Orleans, LA, 3-6 Oct 1976. SPE-6089-PA. http://dx.doi.org/10.2118/6089-PA.
Voegele, M.D. and Jones, A.F. 1980. A wireline hydraulic fracturing tool for the determination of in situ stress contrasts. In Proc. of the 1980 SPE/DOE Symposium on Unconventional Gas Recovery, held in Pittsburgh, PA, 18-21 May 1980. p.123-130. SPE/DOE 8937-MS. http://dx.doi.org/10.2118/8937-MS.
Nolte, K.G. and Smith, M.B. 1981. Interpretation of fracturing pressures. J. Pet. Tech. 33(9):1767-1775. SPE-8297-PA. http://dx.doi.org/10.2118/8297-PA.
Nolte, K.G. 1982. Fracture design considerations based on pressure analysis. In Proc. of the SPE Cotton Valley Symposium held in Tyler, TX, May 20, 1982. SPE 10911-MS. http://dx.doi.org/10.2118/10911-MS.
Abou-Sayed, A.S. 1982. Laboratory evaluation of in-situ stress contrast in deeply buried sediments. In Proc. of the SPE-AIME 57th Annual Fall Technical Conferences and Exhibition, held in New Orleans, LA, 26-29 Sep 1982. SPE-11069-MS. http://dx.doi.org/10.2118/11069-MS.
Bieniawski, Z.T. and Bernede, M.J. 1979. Suggested methods for determining the uniaxial compressive strength and deformability of rock materials: Part 1. Suggested method for determining of the uniaxial compressive strength of rock material. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., April 1979, 16(2):138-140.
Kylander, M.E, Ampel, L, Wohlharth, B., and Veres, D. 2011. High-resolution X-ray fluorescence core scanning analysis of Les Echets (France) sedimentary sequence: new insights from chemical proxies. J. Quatenary Science, 26:109-117. http://dx.doi.org/10.1002/jqs.1438.
Rothwell, R.G. and Croudance, I.W. 2015. Micro-XRF studies of sediment cores: a perspective on capability and application in the environmental sciences. Micro-XRF Studies of Sediment Cores Applications of a Non-Destructive Tool for the Environmental Science, Croudace, I.W. and Rothwell, R.G. (eds), Springer, Heidelberg, Germany, p.1-21. http://dx.doi.org/10.1007/978-94-107-9849-5.
Driskill, B., Pickering, J., and Rowe, H. 2018. Interpretation of high resolution XRF data from the Bone Spring and Upper Wolflcamp, Delaware Basin, USA. In Proc. of the Unconventional Resources Technology Conference, held in Houston, TX, 23-25 Jul 2015. URTeC: 2901968. http://dx.doi.org/10.15530/URTEC-2018-2901968.
Pierce, J. and Parker, J. 2015. Identifying landing zones utilizing high-resolution X-ray fluorescence (XRF) chemostratigraphy. In Proc. of the Unconventional Resources Technology Conference, held in San Antonio, TX, 20-22 Jul 2015. SPE-178593-MS/URTeC:2154543. http://dx.doi.org/10.15530/URTEC-2015-2154543.
Brignoli, M., Fanuel, P., Holt, R.M., and Kenter, C.J. Effects on core quality of a bias stress applied during coring. In Proc. of the SPE/ISRM Eurock '98, held in Trondheim, Norway, 8-10 Jul 1998. SPE/ISRM 47262-MS. http://dx.doi.org/10.2118/47262-MS
Lee, J.S. 2015. Calibration of rebound hardness numbers to UCS in shale formations. J. Petrol. Tech. 67(1):41-45. http://dx.doi.org/10.2118/011500041-JPT.
Advani, S.H., Lee, T.S., and Moon, H. 1990. Energy considerations associated with the mechanics of hydraulic fracture. In Proc. of the SPE Eastern Regional Meeting, held in Columbus, OH, 31 Oct-2 Nov 1990. SPE-21296-MS. http://dx.doi.org/10.2118/21296-MS.
Zeynal, A.R., Snellilng, P., Neuhaus, C.W., and Muller, M. 2014. Correlation of stimulated rock volume from microseismic pointsets for production data - A Horn River case study. In Proc. of the SPE Western North American and Rocky Mountain Joint Regional Meeting, held in Denver, CO, 16-18 Apr 2014. SPE-169541-MS. http://dx.doi.org/10.2118/169541-MS.
Zhang, X., Holland, M., Van Der Zee, W., and Moos, D. 2014. Microseismic estimates of stimulated rock volume using a detection-range bias correction: Theory and case study. In Proc. of the SPE Hydraulic Fracturing Technology Conference, held in The Woodlands, TX, 4-6 Feb 2014. SPE 168580-MS. http:/dx.doi.org/10.2118/168580-MS.
Al Duhailan, M.A. and Sonnenberg, S.A. 2015. Analyzing beef fractures: Genesis and relationship with organic-rich shale facies. In Proc. of the Unconventional Resources Technology Conference, held in San Antonio, TX, 20-22 Jul 2015. SPE-178521-MS/URTeC:2151959. http://dx.doi.org/10.15530/URTEC-2015-2151959.
Lejay, A., Larmier, S., Mans, L, and Gelin, F. 2017. The role of porosity in the development of parallel bedded calcite filled fractures (or beef) in The Vaca Muerta: An integrated analysis from high resolution core data. In Proc. of the Unconventional Resources Technology Conference, held in Austin, TX, 24-26 Jul 2017. URTeC: 2668071. http://dx.doi.org/10.15530/urtec-2017-2668071.
Gale, J.F.W., Reed, R.M., and Holder, J. 2007. Natural fractures in the Barnett shale and their importance for hydraulic fracture treatments. AAPG Bulletin, 91(4):603-622. http://dx.doi.org/10.1306/11010606061.