Development and Implementation of Heavy Wall High Strength Sour Service Accessory and Risers for HPHT Application in the Gulf of Mexico
- Carine Landier (Vallourec Oil & Gas France) | Jonathas Oliveira (Vallourec Oil & Gas France) | Christelle Gomes (Vallourec Oil & Gas France) | Ivana Parezanovic (Vallourec Deutschland GmbH) | Mike Tricarico (Vallourec USA Corporation) | Stuart Cole (Vallourec USA Corporation)
- Document ID
- Offshore Technology Conference
- Offshore Technology Conference, 4-7 May, Houston, Texas, USA
- Publication Date
- Document Type
- Conference Paper
- 2020. Offshore Technology Conference
- 4.1.2 Separation and Treating, 4 Facilities Design, Construction and Operation, 4.2 Pipelines, Flowlines and Risers, 4.1 Processing Systems and Design, 4.2.4 Risers, 4.2.3 Materials and Corrosion
- Process Development, High Temperature and High Pressure, Material Science, Sour Service, Heavy Wall Large Diameter Pipes
- 18 in the last 30 days
- 68 since 2007
- Show more detail
- View rights & permissions
Oil and gas development needs in the Gulf of Mexico have continued to push into High Temperature and High Pressure (HPHT) applications. Along with the HPHT requirements, the need for sour service resistance has also grown. To meet these needs, large OD and heavy wall pipe with sour service capability have been specified. To answer this need Vallourec has pushed limits of wall thickness with sour service properties far beyond the standard. This was done for both heavy wall accessories as well as for riser application. Outer diameters ranged from 13 inches to over 23 inches, with wall thicknesses of 2.5 inches.
These sizes are common in lower strength material, but to meet the high-pressure requirements, Vallourec was able to provide up to 125ksi specified minimum yield strength grade material. Higher grade material allowed supported cost savings and select elimination of some Corrosion Resistant Alloys (CRA) components. It also allowed much lighter weight pipe as compared to 80ksi specified minimum yield strength material that is standard for sour service applications in oversize OD and heavy wall.
To develop such heavy wall pipes with sour service resistance, the heat treatment process has been the most critical step. Quenching the material to reach this level of performance requires the heat-treatment lines to be designed with state-of-the-art and robust heat-treatment equipment.
This paper will discuss the material properties achieved on several of the large diameter, heavy wall, sour service pipes.
|File Size||847 KB||Number of Pages||11|