Revisiting Subsalt Exploration Drilling Challenges
- Jaber Alfayyadh (Saudi Aramco) | Amal Al Moqbil (Halliburton) | Ahmed Taher (Halliburton)
- Document ID
- International Petroleum Technology Conference
- International Petroleum Technology Conference, 13-15 January, Dhahran, Kingdom of Saudi Arabia
- Publication Date
- Document Type
- Conference Paper
- 2020. International Petroleum Technology Conference
- Revisiting, Exploration, Subsalt
- 33 in the last 30 days
- 93 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 7.00|
|SPE Non-Member Price:||USD 23.00|
The quest for hydrocarbons continues to increase and is becoming more challenging as the search pushes operators further into unexplored basins and frontiers globally. In the last 20 years, subsalt drilling has provided some new and promising prospect landscapes and fairways; however, major challenges are inherent with drilling subsalt exploration wells. One of the most problematic properties of salt is deformation or mobile behavior; in other words, salt has almost no permeability and porosity, and it creeps under differential stresses, causing hole stability issues.
Historically, where global offshore and onshore exploration frontiers encountered, salt drilling posed significant challenges to drilling. Because salt behavior is also attributable to salt type and the stress state of the confining geological environment, lateral forces from the rift ridge system and evaporite seal produce high mobility in the halite subsalt accumulations. Major challenges faced while drilling this salt were stuck pipe, tripping in and out issues, wellbore enlargement, and severe bottomhole assembly (BHA) whirl leading to catastrophic lost-in-hole incidents and nonproductive time.
In-depth analysis of the formation’s geomechanical attributes, mud properties, drilling practices, and casing design was fundamental to developing better defined and customized drilling solution strategies to address the unique subsalt drilling challenge. Drilling fluid selection, chemistry, and application engineering also played a fundamental role in preventing washed-out holes.
Additionally, the salt creeping rate is generally a function of in-situ stress, exposure time, and temperature. Proper mud design and drilling practice help minimize potential risks of hole instability in addition to modifying the casing design to isolate the salt, which requires a different mud weight than the overlying and underlying formations.
Most early exploration wells through salt were drilled as vertical wells; however, achieving the necessary directional trajectory control through a mobile salt caused concern. Therefore, potential geomechanical risks, drilling mechanic analysis, such as torque and drag, and potential vibration issues are considered while designing the directional path through a subsalt formation.
This paper discusses a comprehensive geomechanical overview, recent successful experiences of drilling salt with the application of drilling fluid, drilling practices, casing design, and trajectory design perspectives in addition to a comprehensive report of lessons learned.
|File Size||960 KB||Number of Pages||12|
Adewuya, O., Tiwari, S., King, S.. 2014. Planning, Execution and Delivery of First Saudi Arabian Red Sea Deepwater Well: Project Management and Execution Case Study. Presented at the Abu Dhabi International Petroleum Exhibition and Conference, Abu Dhabi, UAE, 10-13 November. SPE-171725-MS. https://doi.org/10.2118/171725-MS.
Cromb, J.R., Pratten, C.G., Long, M.. 2000. Deepwater Subsalt Development: Directional Drilling Challenges and Solutions. Presented at the IADC/SPE Drilling Conference, New Orleans, Louisiana, USA, 23-25 February. SPE-59197-MS. https://doi.org/10.2118/59197-MS.
Mathur, R., Seiler, N., Srinivasan, A.. 2010. Opportunities and Challenges of Deepwater Subsalt Drilling. Presented at the IADC/SPE Drilling Conference and Exhibition, New Orleans, Louisiana, USA, 2-4 February. SPE-127687-MS. https://doi.org/10.2118/127687-MS.
Teng, X., Yang, P., Li, N.. 2015. Successful HPHT Drilling Through Innovative Practices: Sharing the Subsalt HPHT Well Drilling Case in Tarim Basin. Presented at the SPE Middle East Oil & Gas Show and Conference, Manama, Bahrain, 8-11 March. SPE-172782-MS. https://doi.org/10.2118/172782-MS.
Saleh, S., Williams, K.E., and Rizvi, A. 2013. Rubble Zone Below Salt: Identification and Best Drilling Practices. Presented at the SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, USA, 30 September-2 October. SPE-166115-MS. https://doi.org/10.2118/166115-MS.
Whitson, C.D. and McFadyen, M.K. 2001. Lessons Learned in the Planning and Drilling of Deep, Subsalt Wells in the Deepwater Gulf of Mexico. Presented at the SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, USA, 30 September-3 October. SPE-71363-MS. https://doi.org/10.2118/71363-MS.