... & PE-PP Multilayer metal additized plastics were collected and proof of concept was established by experiments in batch Micro-Coker unit, which showed plastic conversion to lighter distillates LPG, Naphtha, Diesel and Coke. Experiments for validation were carried out in 1 bbl/day Delayed Coker pilot...

... cuts and realizing the wholesale application of carbon enriched component. RDCP process is simple in operation, low in equipment and operating cost. It not only has good reaction selectivity and easy control, but also can improve the product's structure and character. Pilot Experiments showed that RDCP...

... will experience the availability of true 3D processing algorithms also in the pre-stack domain. Acquiring high density 3D data should therefore become a prerequisite in order to fully make use of the next developments in data processing technology. Uniformly and densely sampled 3D data, truly 3D processed...

... performance in the 10L autoclave at our laboratory. By varying the synthesis parameters, the crystal size and the acidity of SAPO-34 could be adjusted. The reaction conditions and repeating regeneration experiments were done in the fixed-bed reactor over a HSAPO- 34/Al2O3 MTO catalyst. The results of reaction...

.... investigated several different metal oxide catalysts and inert ceramic packing in different size diameters. In these experiments it was shown that the improvement of yields over the inert ceramic materials are in a similar range as with the catalysts. Also it was shown that the yield of products are in similar...

...441BLOCK 3 FORUM 19 MICROSEISMIC MONITORING ON GAS STORAGE RESERVOIRS: A TEN-YEAR EXPERIENCE J.-P. Deflandre Institut Français du Pétrole, France; F. Huguet Gaz de France, France. Abstract Since 1991, IFP and GDF have been improving microseismic monitoring for reservoir characterization. Using...

.... The surface chemistry during the FCC regeneration process was investigated by temperature programmed desorption and oxidation experiments. From coke loaded spent FCC catalysts NH3 and HCN were formed via pyrolysis at temperatures above 350°C. The amount of NH3 released was significantly influenced...

... bubble expansion, field pressure and gas saturation is critical to optimize field management and gas recovery. Several seismic monitoring experiments have been carried out over Céré-la-Ronde test site, with varying degrees of success. Right at the beginning of the reservoir filling, in 1993, a baseline...

... interpretation case studies are based on the application of scientific models. Usually, these studies are based on previous experiences. This paper shows how to provide for a better support to bio-phenomena scientists and specialists, on exchanging scientific programs, models and data. We specifically describe...

.... PHYSICAL MODELS Figure 1 steamflood model TWO EXAMPLES OF SAGD MODEL TYPES OF EXPERIMENTS STUDIES Many different experiments were conducted: Steam distribution in SAGD wells Some examples: · Steam is very unevenly distributed around the · Bottom water studies injection well difficult to predict using...

..., compaction, micromodel, and in situ upgrading experiments. FOAMY OILS The result of this experimental study points towards foamy oil primary production, where a very efficient solution gas drive process produces the oil. In fact, recovery factors up to 10% are estimated, which is high for oil of such high...

.... many cases these relationships allow to decipher from stable isotopes of gas LABORATORY EXPERIMENTS ON components the type and maturity of the GENERATION AND STABLE ISOTOPES corresponding source rock1-3. Only recently, a OF NATURAL GAS more fundamental understanding of the This new analytical technique...

... the reservoir permeability. As a consequence, redistribution of fluids occurs, increasing swept zones and oil recovery. Coreflooding experiments were carried out in a sandstone model, with and without oil, using polymer producing bacterium isolated from wells of Carmópolis field, Brazil. The results indicate...

... C 2+ gases. Bench-level experiments are reported on the direct, one-step conversion of methane to ethylene, propylene, and other light hydrocarbons, in a low-pressure plasma glow-discharge. Relative percentages of useful higher hydrocarbons in the output mixture range up to 42% for ethylene, to 68...

.... These steps are briefly described techniques for the risk assessment. risk and uncertainty assessment explosion consequence analisis risk assessment petrochemical plant experiment Artificial Intelligence Downstream Oil & Gas concentration knowledge risk management consequence analysis...

...-Westphalian source rocks. Organo-petrographical studies in order to set up maturity maps of Base Zechstein and Top pre-Permain. Modelling of burial and subsidence. Source rocks evaluation including hydrous and anhydrous pyrolysis experiments. Extensive gas and isotope geochemistry on reservoir gases...

... investigations showed that the periodical supply of small amounts of the nutritious composition into the experimental vessel resulted in more efficient production of oil-displacing metabolites by micro- organisms: CO,, alcohols, fatty acids and surfactants. Application of the nutritious flooding to formation...

... Abstract. An enhanced SAGD process named SAGD-ISSLW for heavy oil recovery has been studied by experiments using 2-dimensional scaled physical-models, video and infra-red visualization techniques. In the usual SAGD process, oil production rate increases with increasing vertical well spacing...

... will discuss the implications of some of the research on the optimum application of the cold production process. INTRODUCTION As a first step in examining sand production mechanisms, simple extrusion experiments were per- formed in which a sand suspension was pushed through a converging die. When...

... methods. EXPERIMENTAL WORK Measurement of corrosion underneath coatings In the present investigation, Epoxy, a commercial organic coating was applied on one side of metallic samples of Copper (99.7%) and brass (76% Cu & 24% Zn). The Epoxy is polyamide cured (white) paint. On the other hand, a coal tar...