There is growing evidence showing that because of the interact between pore wall and fluid, the oil seepage in tight porous media conforms to low-velocity non-Darcy flow. However, in the process of CO2 Huff-n-Puff development, Darcy model or previously published low-velocity non-Darcy flow model with constantly non-linear parameter in most numerical simulator may cause inaccuracy in simulating the variation of non-linear degree since the mobility improvement of oil phase contacted with the injected CO2.

In this paper, a dynamic non-Darcy flow model linked to phase behavior calculation with capillary pressure is firstly presented that uses dynamic non-linear parameter, C1. Furthermore, two mechanism cases with unstructured-perpendicular-bisection (PEBI) grid and fractures presented by embedded-discrete-fracture model (EDFM) are established to respectively validate self-developed simulator and discuss the comparison of Darcy model, previously published non-Darcy model and dynamic non-Darcy model. Additionally, the effect of nanopores on dynamically non-linear degree is analyzed. Finally, field history matching of dynamic non-Darcy flow in actual field-scale model is conducted. Research shows that the dynamic non-Darcy flow model can properly describe the reduction of nonlinear degree of oil phase in the gas-injection swept and diffusion region. In addition, nanopores exhibits typical advantages on oil recovery because capillary pressure has the ability to degrade the non-linear degree of oil phase. Finally, this dynamic non-Darcy flow model enables to make the evaluation in well performance and bottom hole pressure more accurate.

This content is only available via PDF.
You do not currently have access to this content.