... is investigated through finite element simulations and centrifuge model tests. Results are presented in the form of failure envelopes in the load-time plane, correlating, for each failure mechanism detected, the load level to the corresponding holding time. The findings of this study are considered useful...

... prediction displacement original prediction load level geology pile head load jeanjean head displacement pile load test test result cyclic test strength profile Session 19 - Foundation Performance and Ground Characterisation doi:10.3723/HRNM4747 Prediction and back-analysis of centrifuge...

... leads to shakedown behaviour. The model predicted no capacity degradation during low-intensity cycling at low load levels with minimal degradation in the high-intensity cyclic loading tests. Measurements of tensile capacity after high intensity compressive cycles, which showed varying amounts...

..., to determine the deformations of a monopile over its service life using the FEA the following consecutive steps are required: 1. Determine the load collective consisting of load levels and related number of cycles 2. Compute the induced states of stresses in the soil by the first FEA 3. Ascertain the cyclic...