Skip Nav Destination
1-7 of 7
Keywords: fracture growthClose
Paper presented at the SPE Western Regional Meeting, April 27–30, 2015
Paper Number: SPE-174002-MS
... development of industry best management practices. Wellbore Design fracture growth critical fracture energy construction hydraulic fracturing displacement cement fugitive gas annular migration condition wellbore integrity strength differentially fracture energy stiffness material interface...
Paper presented at the SPE International Thermal Operations and Heavy Oil Symposium and Western Regional Meeting, March 16–18, 2004
Paper Number: SPE-86991-MS
... appropriate fracture conductivity and an economic optimum fracture length while reconciling these with actual fracture growth behavior in the reservoir. The technique incorporates the following simple, automated steps: Selects the most cost-effective fluid that will meet a minimum apparent viscosity...
Paper presented at the SPE Western Regional/AAPG Pacific Section Joint Meeting, May 19–24, 2003
Paper Number: SPE-83503-MS
...? To assist with answering this question, the fracture diagnostic of surface tiltmeter fracture mapping was used to evaluate fracture growth during the nine fracture treatments. Tilt results include fracture orientation and the approximate location and volume distribution of fracture components along...
Paper presented at the SPE Western Regional Meeting, May 10–13, 1998
Paper Number: SPE-46194-MS
... fracture treatment fracture dimension upstream oil & gas fracture mapping downhole tiltmeter fracture mapping hydraulic fracturing tiltmeter fracture mapping real time system geometry mapping diatomite wellbore fracture growth fracture fracture height growth dimension...
Paper presented at the SPE Western Regional Meeting, March 30–April 1, 1992
Paper Number: SPE-24063-MS
... ABSTRACT Surface response to fracture growth (as measured by an array of tilt meters) is now being analyzed jointly with formation pressure response data to more accurately determine the result of fracture growth during stimulation treatments and for fracture closure after shut-in. Previously...
Paper presented at the SPE Western Regional Meeting, March 20–22, 1991
Paper Number: SPE-21776-MS
... migrated into the low stress payzone and increased after the fracture reached the outer barriers, and (iii) a higher net fluid pressure was required to initiate the fracture in comparison to the fracture initiated in the payzone. case iv symposium fracture growth geometry fracture payzone...
Paper presented at the SPE California Regional Meeting, March 23–25, 1988
Paper Number: SPE-17417-MS
...-element stress-analysis model was developed to calculate the changes in in-si tu stress field. A three-dimensional fracture simulator was used to predict fracture growth and shape based on the calculated stress distribution. A thermal reservoir simulator was modified to include a simplified fracture...
Product(s) added to cartClose Modal