... analysis hydraulic fracture production control completion installation and operations reservoir simulation dimensionless time interference test production well pressure drawdown fracture production logging complex reservoir drillstem/well testing decline ratio production rate pressure...

... of these pressure-monitoring projects. complex reservoir unconventional resource economics Energy Economics hydraulic fracturing drilling operation stimulation Upstream Oil & Gas gauge system selection pressure gauge Downhole Pressure Gauge installation requirement operator production well...

... phase transition phase recovery factor enhanced recovery constraint operation bottomhole pressure production well oil recovery factor saturation reservoir aquifer injection permeability storage spe 167180 Oil Recovery Introduction Although carbon capture and storage (CCS) offers...

... production well injection oil recovery factor recovery factor hydraulic fracture reservoir oil recovery completion injection rate fracture transverse hydraulic fracture steam injectivity reservoir permeability different run society of petroleum engineers permeability Introduction...

... oil & gas dead oil simulation simulation steam chamber enhanced recovery oil simulation liner sagd performance sagd operation solution gas steam-assisted gravity drainage pressure point fluid level well pair production well csug spe 149503 injection non-condensable gas...

... process created a hard coke shell around the chamber, which isolated the steam chamber from the surrounding media. upstream oil & gas oil production in-situ combustion production well enhanced recovery combustion process experiment thermocouple thermal method enriched air viscosity...

.... The dominant solvent finger becomes a conduit that grows into a solvent chamber connected to the injection well in the upper portion of the reservoir, and develops into an oil drainage conduit connected to the production well in the lower portion of the reservoir. Solvent dispersion layers are located...

... length of 72 m), 30 grid blocks in vertical direction (total net pay of 36 m) and 4 grid blocks along horizontal production well (total length of 500 m). In both CAGD and SAGD cases the production well is located near the bottom of reservoir and injection well is placed 6 meter above the production well...

... Abstract A gas production system from methane hydrate (MH) sediment layers by combination method with hot water injection and bottom hole pressure control at production well using radial horizontal wells has been proposed. Firstly, gas production characteristics by the depressurization method...

... of high water cut in production wells during waterflooding process? How to predict the rising of artificial water-oil contact? reservoir characterization production well water cut waterflooding reservoir pressure basement reservoir fractured basement reservoir enhanced recovery...

... production well experiment recovery method temperature profile csug spe 137836 combustion zone reservoir injection well bitumen thermal method society of petroleum engineers corner well sagd Introduction Steam Assisted Gravity Drainage (SAGD) is a steam drive process in which at least one...

... oil & gas saturation fluid dynamics phase equilibrium pressure gas rate permeability production well flow assurance gas hydrate reservoir reservoir initial pressure mathematical model gas production water rate Introduction Gas hydrates are ice-like crystalline compounds...

... tests proved the efficiency of the RF-EM stimulation of heavy oil / bitumen deposits with low water cut values (in operating production wells with water cut <30% on early field development stages). Numerical simulations suggest that bottomhole temperature and heat/mass transfer effects...

... fluids to the production well. Combustion front formation and its stability are major concerns in this arrangement. While the short distance between injector and producer addresses the cold oil blocking problem in the reservoir, it has the potential to create air fingers which could prevent stable...

... gravity drainage thermocouple situ combustion sagd chamber saturation air injection well steam chamber thermal method sagd combustion front reservoir water saturation combustion upstream oil & gas layer thermocouple production well enhanced recovery experiment temperature profile...