1-20 of 26
Keywords: proppant
Close
Sort by
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, February 25–27, 2014
Paper Number: SPE-167685-MS
... properties, the injected fluid volume and efficiency. Evaluating the placement of proppant inside the DFN enables distinction between the part of the stimulated rock volume (SRV) that contributes to production in the long term, and the part of the reservoir that was affected by the treatment but may...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, February 25–27, 2014
Paper Number: SPE-167692-MS
.... complex reservoir orientation property quality shale property quality shale gas drilling operation lateral stegent operator Directional Drilling lateral length shale play proppant hydraulic fracturing fluid system Upstream Oil & Gas study area conductivity fracture Standard...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, February 25–27, 2014
Paper Number: SPE-167786-MS
... fracturing materials Upstream Oil & Gas salt concentration final viscosity different polymer proppant residue guar cmc fracturing fluid concentration viscosity reduction hydraulic fracturing aqualon 2007 fluid system society of petroleum engineers polymer salt effect...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, February 25–27, 2014
Paper Number: SPE-167796-MS
... management Current shale gas developments often use water-based hydraulic fracturing of deep wells using proppant and several chemicals. Clean water has to be available at all times and waste water has to be treated prior to recycling or discharge. This process has impact on the people's perception...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, February 25–27, 2014
Paper Number: SPE-167755-MS
..., pumping 95,000 bbl of fracturing fluid and 8.6 million lb of ceramic proppants. The stimulation technique reduced the stimulation cycle time to just four days, and the initial production of the two wells was more than 8,320 B/D, which was more than 10 times the average initial production in the area...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, February 25–27, 2014
Paper Number: SPE-167787-MS
... the fracability and whether it is advantageous to use a slickwater, linear, or crosslinked gel. Similarly, analysis of formation softening using Brinell hardness testing and proppant embedment testing will help ensure the formation does not completely close on treatment completion and will have conductive flow...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, February 25–27, 2014
Paper Number: SPE-167782-MS
... and Operations complex reservoir tight gas Upstream Oil & Gas tight-ga formation hydraulic fracturing fracturing fluid concentration stimulation fracturing materials proppant stabilizer fracture conductivity conductivity reservoir permeability Completion Challenge Saudi Arabia perforation...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, February 25–27, 2014
Paper Number: SPE-167751-MS
... fracturing technique using a combination of swellable packers and sliding-sleeve frac ports. The fracturing design for the Em-Egovskoe field is discussed. This design is an adaptation of an alternating hybrid fluid system composed of proppant slugs during the pad stage and a high-concentration proppant ramp...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, February 25–27, 2014
Paper Number: SPE-167758-MS
... as the time of propagation of the elastic pressure wave is negligibly smaller than the time of injection. Shrinkage of the coal caused by gas desorption, which takes place due to a reduction in reservoir pressure, is neglected. The proppants fill the cleat network as a partial mono-layer. This means...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, February 25–27, 2014
Paper Number: SPE-167774-MS
... of them are highly dependent on proppant distribution in the fracture. Introduction Abstract Post-treatment production analyses after hydraulic fracturing with crosslinked gel or slickwater often indicate that the treatment did not achieve the designed fractured area, which could be attributed...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, February 25–27, 2014
Paper Number: SPE-167754-MS
... fluid systems. However, as the development of unconventional (i.e., tight gas, shales, coalbed methane), or underpressured reservoirs has increased, so has the demand for innovative hydraulic fracturing designs. The most recent of these design changes has been the popular method of placing proppant...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, February 25–27, 2014
Paper Number: SPE-167778-MS
... water and proppant to break the rock and create a complex network of induced and natural fractures, which result in localized high permeability for a limited time allowing the production of economical rates of hydrocarbons. Despite the complexity of the fracing mechanism and its resulting consequences...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, March 20–22, 2012
Paper Number: SPE-149872-MS
... the logistics very challenging. Land acquisition problems, resulting in different drilling and field development strategies employed. Seasons/weather challenges in the northeastern part of India, where most of the CBM blocks are located. Proppant flowback is a problem due to lower closure stress...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, March 20–22, 2012
Paper Number: SPE-149787-MS
... rate well upstream oil & gas variation spe 149787 sa institute inc input space proppant target variable input variable cumulative production holdaway unconventional reservoir workflow operator society of petroleum engineers Introduction As unconventional reservoirs...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, March 20–22, 2012
Paper Number: SPE-150949-MS
... stimulation, and, over the years, many new and innovative fracturing methods have been successfully developed that promise improved completion-process efficiency. Some of these processes focus on delivering maximum fluid and proppant volume in the shortest operational time. To accomplish this, several...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, March 20–22, 2012
Paper Number: SPE-151696-MS
... of radioactive tracers which are blended into the proppant at the wellsite. Clearly this can present both a safety and environmental hazard. Furthermore, in some regions of the world operators are prohibited from using these hazardous materials altogether. This paper presents an innovative, environmentally...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, March 20–22, 2012
Paper Number: SPE-152051-MS
... presentation water management fracturing fluid spe 152051 proppant efficiency fracturing materials bacteria ch 2 cfu ml upstream oil & gas new approach society of petroleum engineers Introduction In Fig 1 , the bacteria population counts of a large number of water samples was measured...
Proceedings Papers

Paper presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, March 20–22, 2012
Paper Number: SPE-152910-MS
... and therefore more benefit was actually achieved when using gelled fluids to place higher proppant concentrations. The places where WaterFracs continued were where reservoir pressures were low, or permeabilities were extremely low. Just how simple are our fractures out in the formation? Abstract After...

Product(s) added to cart

Close Modal