1-12 of 12
Keywords: producer
Close
Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Proceedings Papers

Paper presented at the SPE Thermal Integrity and Design Symposium, January 26–28, 2021
Paper Number: SPE-203859-MS
... in Figure 1 . Abstract Flow control devices (FCDs) have demonstrated significant potential in improving recovery from Steam Assisted Gravity Drainage (SAGD) production wells. Passive FCDs will allow the SAGD producer well to create additional pressure drop to balance the production influx...
Proceedings Papers

Paper presented at the SPE Thermal Integrity and Design Symposium, January 26–28, 2021
Paper Number: SPE-203864-MS
... & gas temperature gradient viscosity solvent mole fraction reservoir simulation fluid dynamics correlation subcool mole fraction pvt measurement recovery process variation producer steam-assisted gravity drainage downstream oil & gas irani relative permeability liquid pool latent...
Proceedings Papers

Paper presented at the SPE Thermal Integrity and Design Symposium, January 26–28, 2021
Paper Number: SPE-203868-MS
... Abstract ConocoPhillips operates Surmont, which is the first Steam-Assisted Gravity Drainage (SAGD) project to implement Flow Control Devices (FCDs) in producer wells. This study was conducted to evaluate the production performance of different liner completion strategies. The analysis compared...
Proceedings Papers

Paper presented at the SPE Thermal Integrity and Design Symposium, January 26–28, 2021
Paper Number: SPE-203870-MS
... Summary Late in the life of the Steam Assisted Gravity Drainage (SAGD) process, it has become common practice to drill a single, horizontal infill well (called a “Wedge Well™” by some) in the oil bank located between two mature SAGD well pairs to produce the bitumen that has been heated and...
Proceedings Papers

Paper presented at the SPE Thermal Well Integrity and Design Symposium, November 19–21, 2019
Paper Number: SPE-198695-MS
... producer slotted liner conformance Surmont injector control device procedure circulation strategy differential pressure Upstream Oil & Gas viscosity application Inflow Control Device Canada This section provides a brief explanation of the motivation for investigating the use of...
Proceedings Papers

Paper presented at the SPE Thermal Well Integrity and Design Symposium, November 19–21, 2019
Paper Number: SPE-198681-MS
... Abstract Liner failure is one of the key risks in operation of SAGD producers and is often associated with erosion as a result of steam production ( Burke, L. et al. 2018 ). Among various intervention methods, tubing deployed inflow control devices (ICDs) have been used to remediate wells. In...
Proceedings Papers

Paper presented at the SPE Thermal Well Integrity and Design Symposium, November 19–21, 2019
Paper Number: SPE-198697-MS
... along a producing lateral. The resulting equation of the analysis acts as a simple rule of thumb for determining an appropriate pressure drop across ICDs to achieve conformance. Secondly, the study evaluates the performance of ICDs that had been installed in four wells, two of which had ICDs installed...
Proceedings Papers

Paper presented at the SPE Thermal Well Integrity and Design Symposium, November 27–29, 2018
Paper Number: SPE-193364-MS
... control device placement optimization algorithm depositional element Artificial Intelligence Upstream Oil & Gas liner producer FCD production performance algorithm deposit The forecast model ( g ) is applied to the proposed sample of model parameters advancing the model for the...
Proceedings Papers

Paper presented at the SPE Thermal Well Integrity and Design Symposium, November 27–29, 2018
Paper Number: SPE-193369-MS
... Figure 7 Illustration of steam exposure and "steam breakthrough" after liquid-pool level moves lower than the undulation height of the producer. where L hs is length of the hot spot along the producer, and Γ is: 7 Γ = Ln ( 1 Ω h r w ( 1 Ω + 1...
Proceedings Papers

Paper presented at the SPE Thermal Well Integrity and Design Symposium, November 28–30, 2017
Paper Number: SPE-188149-MS
..., specifically bitumen production by SAGD. An outcome of efforts in 2008, the ICD’s first application was to mitigate flow conformance issues that were seen along the producer and injector wells; these issues were caused by various geologic and operational factors as well as backflow effects. The effectiveness...
Proceedings Papers

Paper presented at the SPE Thermal Well Integrity and Design Symposium, November 28–December 1, 2016
Paper Number: SPE-182522-MS
... Abstract The "Soaker Hose" concept for SAGD injectors has long been a topic of interest for oil sands development, but few field trials have been attempted to date. The primary interest in this type of design is its potential to produce more uniform injection distributions, but other more...
Proceedings Papers

Paper presented at the SPE Thermal Well Integrity and Design Symposium, November 23–25, 2015
Paper Number: SPE-178468-MS
... production, and as a result, profitability of the SAGD process. On the producer well, operators prefer to have a uniform inflow production profile to recover more in-situ oil. This can be achieved through installing inflow control devices (ICDs) in the producer well. ICDs also help to mitigate the negative...

Product(s) added to cart

Close Modal