.... production monitoring Upstream Oil & Gas oil production production control gas lift gas well gas lift project gas lift valve Reservoir Surveillance psia completion Oil Well production rate amal petroleum company oil rate Injection Rate artificial lift system valve gas injection...

..., jet pumping technology was applied to offload the well. A jet pump was run in the well on tubing, which was equipped with a bottomhole assembly (BHA) for a downhole jet pump. It was installed in a free-style after opening the swab and master valve of the Christmas tree. Once, the jet pump properly...

... requirements makes this mixer ideal for installation in congested areas without the adequate space for conventional spool static mixers. The high- efficiency static mixer produced a 17% reduction of wash water consumption after installation downstream the conventional mixing valves and upstream the desalter...

... problems. The test apparatus is made of several components such as a test cell, a mud reservoir, a spacer/activator reservoir and a LCM reservoir. All these components are engineered and assembled in a systematic way using various fixtures such as ball valves, relief valve, connecting pipes, pressure inlet...

... 3 risk assessment risk assessment offshore safety concept inventory fire protection requirement valve assessment Introduction Industrial scale fire, explosion and environmental pollution from the production, refining, and distribution of petroleum remains one of the major concerns...

... and extend pump life. Artificial Intelligence internet of things apc application Engineering optimization problem oilfield artificial lift system Upstream Oil & Gas ESP envelope flow compliance objective operation esp speed oil production APC Oil Well Choke Valve well performance...

... Abstract Well tie-in is an activity that requires careful measurement and fabrication methods. One of the most critical spools in onshore well tie-in is the riser connecting the wing valve in the X-mas tree to the choke valve. This piping section is regularly constructed of carbon steel...

... recommendations of this approach did not have down-hole safety valve failures, protecting 35% of field oil production volume and ensuring safer operations demonstrating strong business value. Overall, application of this P2P framework has helped asset to reduce yearly scaling related losses by more than 90...

... Abstract In this work, an elastic carbon composite, a new category of high-pressure/high-temperature (HPHT) seal material, was developed and its successful application in downhole valves is discussed to demonstrate how it could address sealing challenges in HTHP and sour wells exploration...

... of the precipitates to the bottom of the vessel. Abstract A novel silicon and oxygen doped diamond like carbon coating was developed to reduce the build-up of scale from oilfield production tools such as sub-surface safety valves and gas-lift valves. The coating was deposited on 2" × 2" flat metallic coupons...

... in figure 8 indicated that laterals 5 and 3 are dominating the inflow when the well is produced with all the downhole valves in the fully open position. This prevents weaker laterals like the mainbore and lateral 4 from meeting the target rates. Long term production that this condition can cause premature...

..., neither ICD nor AICD are able to shut off unwanted gas and water production completely. The autonomous inflow control valve (ICV) offers the functionality of conventional ICD and can actively shut off unwanted fluid completely. The paper describes the development of Autonomous ICV, experimental test...

... Abstract Reasons for internal and external valve damage are varied in the industry. Valve damage can occur due to irregular preventive maintenance, sand erosion, internal and external corrosion, improper materials selection, and/or due to operating the valve outside of its operating pressure...

... from inflow control devices and open hole packers placed in the reservoir section, multilateral junction systems, through permanent down hole sensors, surface controlled down hole valves and electric submersible pumps in the production tubing. The paper also discusses briefly the integration...

... completion efficiency is evaluated using multiphase production logging tools. Many completion accessories can be run with inflow control device completion strings, these include isolation packers, liner hangers, setting tools, end-of-completion string plugs and valves. All of these accessories may affect...

... in the open hole completion for each lateral to enhance the well’s influx balance and control/delay water production. The intelligent completions (IC) solution, which consists of inflow control valves (ICVs), permanent downhole monitoring system gauges, and multiport packers, are employed to control lateral...

... completion in which the interval control valve (ICV) positions must be changed in order to control flow rate; the completion will become ineffective, if plugging of clearances prevents valve actuation. To mitigate these problems, a method to predict the potential rate of scale formation under realistic...

... monitoring separation and treating Upstream Oil & Gas lateral manifold ESP Production Line wellhead pressure air emission platform flow back operation stream coflexip hose valve choke manifold diverter manifold three-phase separator separator jumper line offshore field flow line...

... enhancement to add more pressure data points into the system and then the holistic approach taken to achieve the ultimate value of the smart completions by integrating each lateral’s reservoir characterization analysis, production data and pressure data to select the right down hole valves adjustments...

... fluid master valve spe 101398 operation management system well barrier society of petroleum engineers uncontrolled release leakage rate surface maximum pressure casing and cementing calculation well component mud hydrostatic column well integrity valve Introduction Kondur...