... utilization society of petroleum engineers pressure gauge simulation model hydraulic communication pressure response reservoir well-test data reservoir model A homogeneous reservoir, populated with the flow capacity of offset wells, has been assumed in the design of the interference test. Total...

... hydraulic fracturing asset life cycle shale gas lateral log analysis complex reservoir natural fracture well logging recovery ultimate recovery placement reservoir mineralogy Field Development Plan life cycle reservoir model Upstream Oil & Gas refrac fracture design...

... in Compositional Systems Abstract Hydrocarbon reservoir performance forecasting is an integral component of the resource development chain and is typically accomplished via reservoir modeling using either numerical or analytical methods. Although complex numerical models provide rigorous means of capturing...

.... This paper investigates different aspects of detailed ICD design on horizontal producers, using a wellcentric reservoir model. The ICD designs from the well-centric models were then applied to a full field reservoir model and integrated studies were then completed. This was achieved by linking several...

... well that ensures minimum interference between wells, and accelerates the recovery from the field. Detailed 3-D numerical reservoir modelling is the most trusted method to determine the optimum locations of the infill wells, but it is time consuming and expensive. Therefore, the industry...

... heterogeneous reservoir reservoir model optimization Directional Drilling Thickness multilateral well configuration interaction Introduction Production Optimization is important to the success of oil and gas activities. Decisions as to what kind of well should be drilled are encountered...

... practices. In this study, PCM is illustrated for spatial uncertainty quantification using a synthetic reservoir model. The resulting data is used to enhance the interpretation of a simulated 3D electromagnetic survey and produce robust saturation maps by combining the knowledge of permeability, fluid...

... on the ultimate oil recovery. These experiments were performed on two stylized reservoir models PUNQ-S3 and SPE10M reservoir models. Given our assumptions, the ultimate recovery did not significantly change with varying the CEOR implementation time. There is, however, an optimum implementation time for CEOR...

... engineering is to develop and establish automated, robust and geologically consistent inversion approaches such that the highly nonlinear and underdetermined nature of interactions and relationships between reservoir model parameters and well responses can accurately be modeled. Furthermore, a reliable...

... of the injection-production cycle is managed by interval control valve (ICV). To provide an overview of this phenomenon, a synthetic reservoir model was built based on Pertama-kedua formation, located in Sumatra Indonesia. Sensitive variables are length of the injection-production perforation and soaking time...

... pressure change transient pressure water cut rate history history reservoir rate change permanent down-hole gauge water two-phase proportional coefficient amplitude reservoir model Introduction Similarly, the bottom-hole pressure pwf 2 is: (6) p w f 2 = p 0 − q...

... but comparisons between the two types showed that the cGA was more robust for the problem under consideration. The cGA was, thereafter, applied to a real field located in the Middle East to investigate its robustness in optimizing well location and design in more complex reservoir models. The model is an upscaled...