... optimization pipeline integrated model calculation turon reservoir requirement production profile Introduction The design process for asset surface facilities solutions in accordance with corresponding development strategy moves together with different technological options that require further...

..., tackling errors exposed within the system through trial and error to boost the experience and optimize workflow. efficiency sajel sensitive information mobile system upstream oil & gas impact on the environment private sector requirement digitization move data government sector...

...; the collaborative work of the customer and the contractor, so-called "active supervising" methodology, aimed on making timely decisions for adjusting of the target requirements during the wells construction, "in situ" method, in order to achieve the made goals. The main conclusions have been made during...

... test results. fracturing materials upstream oil & gas repeatability outlier reproducibility standard deviation proppant calculation laboratory requirement crush resistance fracturing fluid variability mean value measurement uncertainty standard deviation hydraulic fracturing...

... in similar geological conditions. At the same time, laboratory tests showed that the proposed alternative mud formulations did not provide the required level of contamination resistance and inhibiting ability. Over the period from April to September of 2020, the exploration well was successfully drilled...

... ( u ), T ( u )). The indicator of the efficiency of the operation W ( u ) is a measure of the degree of compliance of the actual result of the operation with the required one. The main requirement when choosing a performance indicator is the compliance of the indicator with the target...

... modeling proppant modeling observation well algorithm fracture reservoir characterization fracture height hydraulic fracturing procedure monitoring microseismic event target interval requirement configuration microseismic fracture geometry investigation Logging methods to determine...

... operations and can significantly contribute to non-productive time (NPT). An operator in the Kyumbinskoe Field faced this challenge in a fractured production section of the formation, and conventional LC solutions had been ineffective at achieving strict regulatory top of cement (TOC) requirements...

... This article discusses the application of the proposed approach by the example of developing drilling fluid requirements for penetrating unstable Carboniferous terrigenous (interval of Tula terrigenous C 1 tl(t), Bobrikov C 1 bb and Radaev C 1 rd horizons) deposits prone to collapse...

... muds is not suitable; the minimum mud weight of 1.22 S.G. is just too high for the fracture gradient that has historically led to significant increase in fluid losses. Thus, this was not considered a suitable solution. Direct Emulsion drilling fluid system To meet all the requirements...

... fracturing fluid simulation alkali boron ratio behavior index proppant concentration fluid behavior requirement fracturing materials upstream oil & gas deviation low shear rate abnormal fluid behavior shear rate society of petroleum engineers power law hydraulic fracturing...

... approach. The portal supports each step of the HSSE Competence process: – sets competence matrix requirements for the entire Company; – links them with the employees' individual competence profiles/accounts; – contains a calendar to schedule and signup for the training and assessment events...

... in the short-, medium- and long-term periods as well as the readiness of enterprises for technological cooperation. reservoir characterization upstream oil & gas drilling equipment energy sector semi-submersible drilling rig artificial intelligence modeling requirement october 2020...

... is innovative for sandstones after numerous attempts at the hydraulic fracturing dawn decades ago that revealed insufficient sand conductivity and required a switch to expensive ceramic proppant. The reincarnation of the perspectives of quartz sand in medium permeability reservoirs was provided by the channel...

... programming language visualization tool overview algorithm cpg visualization society of petroleum engineers complexity hydrodynamic model requirement refresh rate fracture integration Introduction Performance of Alternative №1 is sufficient for visualizing simple objects (for example...

... Despite the many-year usage experience with a cement mixture based on Portland cement, there are still no requirements to the process characteristics of cement stone that are scientifically grounded and confirmed with field results. The well casing practice shows that the importance of high...

... to assess before starting any lab evaluation is the type of formations to be drilled. In this case, the predominant rock type was sandstone with shale stringers. The perception was that some form of inhibition would be required due to hole instability in near by wells. Since HPHT drilling fluids...

... Summary Today we can clearly see that the world's leading oil companies strive to improve not only the quality of explorations but also tighten industrial and environmental safety requirements to this work. Green Seismic is a complex of methodologies, technical means and organizational...

... operativity and quality of operational decisions is "digital oilfield". Wintershall is actively developing and implementing an own version of digital oilfield. Examples on a field case with focus on the dynamic model requirements in a tight oil field with strict flow assurance requirement, implementation...

..., transformation of needs to requirements to IT products, methodologies development, development of IT alghoritms, prototyping and verification via testing tools and validation through approbation at production units of company. At the final there are some conclusions about using this alghoritms and tools...