... flood at higher pressures, a numerical simulation model was developed, history matched, and various sensitivities were run to see the impact of water flooding at various reservoir pressures during the life span of the field. It was observed that the recovery would have been more if the water flooding...

... of the problem based on the GLR values. Hence, the top 2 wells were prioritized as the candidates. Both the downhole and wellhead compressors were then modelled in IAM and several sensitivity runs were performed to evaluate the optimum compressor settings to see the impact on flow stabilization and wells...

... Upstream Oil & Gas concentration salinity enhanced recovery adsorption composition complexity polymer sensitivity surfactant microemulsion resolution viscosity investigation injection saturation Reservoir Conditions interfacial tension oil recovery conference permeability...

... sensitivity to evaluate the performance of water and CO 2 injection? 2) Cancross-well EM monitor the different cycles of a typical WAG application? Cross-well EM involves applying inductive physics and 2D/3D inversion to define the inter-well conductivity distribution. Due to its unique spatial...

... placement. Base case porosity, permeability, and water saturation realization was selected from multi-realizations performed in the static model which was then used for sensitivity in fluid flow simulations. Flow simulation was used to analyze the performance of the well considering horizontal wells length...

... simulated using Monte Carlo to define the Low, Base, and High Cases. This was done by comparison with material balance computations and streamline simulation. A stochastic combination of the STOIIP distribution and the RF sensitivities was done through an Experimental Design, Proxy Model, and Monte Carlo...

... results. This paper presents an overview of the technology and some field application examples. well logging sensitivity Upstream Oil & Gas analysis envelope porosity application detector pulsed neutron measurement sensitivity log analysis pulsed neutron technology envelope mineral...

..., the problematic still persists for fine laminated sandstones (clastic thin beds). The objective of this paper is to propose a probabilistic approach on cut-offs in order to improve the coherency and quality of 3D cellular models. Thin beds scaling method cutoff sensitivity geological modeling...

... upstream oil & gas sensitivity reservoir geomechanics geomechanical response vertical displacement profile reservoir characterization heterogeneity property model consideration vertical displacement displacement profile modeling & simulation dilation angle mechanical...

... remediation Production Chemistry Upstream Oil & Gas remediation of hydrates concentration horizontal permeability hydrate inhibition asphaltene inhibition inhibitor enhanced recovery oilfield chemistry scale inhibition Kv Kh ratio sensitivity aquifer squeeze treatment shut-in period...