... Abstract 3D model is a valuable tool in reservoir management, provided its representativeness of reservoir dynamics.Traditional History Match mainly focuses on reproducing reservoir behavior at well scale. A good match is not always representative of fluid movements in the reservoir...

... analyses were performed using the full field data-driven model; complementing the existing conventional numerical model. The accomplishments of the data-driven reservoir model for this project included, but not limited to, comprehensive history matching (including blind validation) and then forecast of Oil...

... distributions, especially in the transition zone, impact the initial hydrocarbon distribution. Analyse how the enhancement of reservoir permeability in the presence of low-intensity fractures influences the predicted reservoir performance. Understand how the above four steps impact the history matching...

... & Gas transmissibility barrier optimize field development plan reservoir simulation pattern water injection History Match connectivity Field Development Plan initial development plan development plan water injection layer 12 society of petroleum engineers Modeling & Simulation...

... are discussed in general terms. The recent history match is then described. This discussion covers the aims of the history match and the preliminary studies in addition to the match itself. The learnings from this work that may be of more general interest are then described. Finally conclusions are given...

... Abstract This paper demonstrates how to utilize seismic data to create a variance cube with different values and convert it into a transmissibility multiplier pattern to assist the history match in dynamic simulation. Lateral variations of the seismic signal can be related to various reasons...

... as follows: The first phase of this work, the "fast loop", involved building models of the regional aquifer and producing reservoirs, developing multiple history matched models and using these models to assess the required volume of injection needed to prevent further reservoir decline. The field level...

... formation permeability distribution if a single-phase production profile is available. This is a key conclusion; and it will be shown later in this paper that having such production profiles in heterogeneous reservoirs will make a tremendous difference to history matching of newly constructed dynamic models...

... needs the help of history matching of numerical simulation, the key point is the selection of the values of polymer physicochemical parameters, which dues to the difference between laboratory experiment conditions and underground reservoir flow conditions, the values of polymer physicochemical...

... this paper, the work flow used to assess the added values of ICDs and MLTBS has been presented based on sector models carefully extracted from the full field static model. These sector models target the key areas of the field where these smart wells are planned to be drilled. A history match process has been...

.... The reservoir has highly permeable stacked braided sandstone channels overlain by heterogeneous stringer sands in tidal channels and bars interspersed with shale. While a conventional history matched model is valid at wellbores, clastic reservoirs usually present challenges for in-fill drilling prediction...

... production through ESP. Introduction depletion oil production reservoir characterization horizontal permeability spe 147943 prediction history match reservoir geomechanics simulation horizontal stress mechanical property water production plastic shear strain fracture upstream oil...

... – Global approach is associated with high risk and lacking minimum accuracy that could be ± 50% error in fluids-in-place estimated by geology and static models, and more severe error in matching WCT trend up to ± 70% & pressure error of ± 500 to 2000 psi. – Well-per-well history match...

... ( Ambastha et al , 2006 ). The history match has been carried out for 37 3SU historical wells with 60 years of production history. Detailed study of interactions among field permeability distribution, aquifer strength, fluid migration and fault transmissibility specifications on simulation results was key...

... waterflood depletion strategy for the last 20 years, has achieved a recovery factor to date of ~ 24%. The geological complexities found in the Bakken Formation at Court introduce many challenges for history matching. It was discovered that successful history matching required the introduction of enhanced...

...; however, this approach was not advised because the full impact on oil rate and reserves was not understood. History Match The focus of this study is a region of the field (Area C), which has had more than 60% hydrocarbon pore volume of water injected and an oil recovery of 31. Within this area...

... learnt were shared with other simulation teams. The study main outlines are as follows: Achieve reliable history match with field data that showed discrepancies. Apply new QA/QC for accurate modeling results and assurance to resolve the common outstanding issues. Develop representative...