Skip Nav Destination
1-6 of 6
Paper presented at the SPE Reservoir Characterisation and Simulation Conference and Exhibition, September 17–19, 2019
Paper Number: SPE-196728-MS
... depletion mdt data permanent downhole gauge saturation permeability Two Years EPS Overview Before putting field on production, cores have been taken from different parts of field as well as DST tests were carried out mainly in flank area, based on that initial dynamic model has been prepared...
Paper presented at the SPE Reservoir Characterisation and Simulation Conference and Exhibition, May 8–10, 2017
Paper Number: SPE-186050-MS
... Reservoir Characterization Upstream Oil & Gas flow in porous media carbonate reservoir reservoir simulation fractured vuggy carbonate reservoir pore pressure History fracture vug pressure depletion natural fracture storage bulk modulus geomechanics fracture bulk modulus...
A.. Al-shamali, E. A. Al-Mayyas, N.. Murthy, N. K. Verma, I.. Al-Sammak, C.. Zhou, S. V. Perumalla, A. L. Shinde
Paper presented at the SPE Reservoir Characterisation and Simulation Conference and Exhibition, September 14–16, 2015
Paper Number: SPE-175559-MS
... Abstract The Jurassic carbonate reservoirs in Minagish Field of West Kuwait have undergone significant pressure depletion (up to 4,000 – 5,000 psi) over the last two decades. However, during the last few years at least two wells showed sudden and significant reservoir pressure increase despite...
Paper presented at the SPE Reservoir Characterization and Simulation Conference and Exhibition, September 16–18, 2013
Paper Number: SPE-165967-MS
... artificial fractures will be safeguarding 40% of expectation reserves in three specific injection patterns. A geo-mechanical study was conducted to understand the dependency of fracture pressure on reservoir pressure depletion, including temperature effects. A geo-mechanical model was generated using well...
Dipankar Dutta, C. V. Nair, Xing Zhang, Khaqan Khan, Assef Mohamad-Hussein, Muhammad Yaser, David Press, Nasser Faisal Al-Khalifa, Eman Hadad Faldi, Nick Koutsabeloulis
Paper presented at the SPE Reservoir Characterisation and Simulation Conference and Exhibition, October 9–11, 2011
Paper Number: SPE-147943-MS
... The constitutive model used for the mechanical modelling of overburden, sideburden, and underburden was a Mohr-Coulomb elasto-plastic model, as defined by Equation (1) . It was expected that depletion-driven compaction and injection-driven unloading would be the main failure-inducing...
Paper presented at the SPE/EAGE Reservoir Characterization and Simulation Conference, October 28–31, 2007
Paper Number: SPE-111410-MS
... stratigraphic cycle depletion Depositional Model enhanced recovery depositional facies Introduction In carbonate environments, depositional facies does not constitute the main driving parameter of petrophysics, as they are usually oberprinted by diagenesis. Original porosity and permeability can...
Product(s) added to cartClose Modal