..., the VFM results are not quantitatively comparable to the production measurements, especially when the VFM is running far away from the calibration period. A recommendation was to enhance the ESP model that controls mainly the information on the flow rate. The present paper describes a new method...

... in ESP completed wells with changing reservoir productivity. reservoir surveillance acid job completion production control upstream oil & gas flow rate production logging fthp esp installation productivity perforation society of petroleum engineers spe 157340 cyclic fluctuation...

... of reservoir fluids, well diameters and number of laterals. The pressure drop due to friction lead to different flow rates at the surface regardless how strong the inflow performance is. The effect of roughness on pressure drop is minimal and only becomes significant at lateral length more than 20000 ft...

... reservoir surveillance constraint efficiency wellhead crude oil heat flux operation process tank spe 156609 flowback scavenger drillstem testing choke manifold flow rate burner water screen combustion Background The drill sites sit on artificial islands constructed from piles...

... Abstract Distributed Temperature Sensor (DTS) technology has recently developed to determine the zonal flow rate in gas/oil producing wells using the measured continuous temperature profile along the wellbore. Comapred to convenetial production logging tool (PLT), DTS has many advantages...

... especially after water injections commences and more production wells come online. data quality production control production monitoring drillstem testing drillstem/well testing calculation information application reservoir management upstream oil & gas flow rate allocation real time...

...) is exactly the gas flow rate w . The conservation of momentum shows that the total pressure drop of gas consists of three components: pressure drop due to the friction between the well wall and flowing-up gas, pressure drop due to the gravity, and that due to the inertia effect. The momentum equation...

... L s g c D To account for the effect of wellbore pressure drop, the inflow equation and the wellbore flow equation ( Eqs. 1 and 18 , or Eqs. 10 and 18 ) need to be solved together because the flow rate is determined from p wf by the inflow equations and p wf is calculated...

...-up for measuring the pressure drop across an orifice for different types of fluids at different flow rates was constructed. The perforation pressure drops were measured and then used to calculate the fluid specific Cp in order to clarify any changes in relation to the viscosity. The results...

... of the tubing string; caused by the additional layer of wax between the crude oil and the gas filled annulus. The paraffin layer has its own heat transfer coefficient therefore thickness can be estimated from temperature data for unchanged flow rate and fluid composition. Using the temperature trends, the Well...

... was checked. Another sample was obtained prior to the end of the test to check its rheology for any possible degradation due to heating and/or shear. Before pumping the test fluid, water was circulated through the flow loop at various constant flow rates and corresponding differential pressure values were...

... of temperatures. concentration mman drilling fluid formulation substrate reaction initial oil permeability polymer permeability flow rate drilling fluid chemistry enzyme substrate drilling fluid selection and formulation drilling fluid property drilling fluids and materials filtrate loss...

..., analysis of vertical-fracture coverage per potential zone, and cumulative production response from the different designs tested. This could serve as guidelines for other operators who might be facing similar challenges in the North Africa region and elsewhere. maximum flow rate diversion reservoir...

... provide sufficient equations to resolve all the unknowns, whereas the DTS provides essential information such as which layers are producing and which are taking fluid, as well as a mass flowrate tool for measuring the flow rate of each layer. The procedure requires varying well flow rates over a range...

... separator pressure suction pressure society of petroleum engineers ejector technology installation multiphase ejector suction flow rate separation and treating flow rate operation conference ejector barg ejector performance spe production upstream oil & gas characteristic drive flow rate...