... procedures for personnel safety and in the development of guidelines on safety matters related to Inspection and Maintenance. This paper will highlight the areas of Corporate Safety's involvement and support them with appropriate and logical reasons. petronas guideline ignition source requirement...

... extremely limited or nonexistent. Occasionally, conditions may exist which require the completion to be designed in a casing size larger than 13-3/8" (34.0 cm). In order to complete in these casing sizes, special equipment must be designed. This paper discusses the design criteria, development...

... effective use of money spent. illustration deluge nozzle firewater pump contingency planning pump capacity requirement epmi module detector fire protection system upward personnel specification wellhead philosophy nozzle lpm deluge system upstream oil & gas platform...

... and associated guy wires, general construction support, underwater cutting, marine fouling removal, scour protection installation and pipeline stabilisation. Information presented in this paper is applicable to all phases of offshore oil and gas production that requires work to be done underwater e.g...

... are a cost effective method of transport when compared to other alternates such as barge or tanker shipment. conduction crude consideration waxy crude oil flow rate offshore pipeline calculation insulation crude oil pipeline transport waxy crude thermal resistance requirement offshore...

... Australia is being constructed by the State Energy Commission to supply local domestic and industrial users with up to 10.9 million m3/day of gas (385 MMSCFD). p. 13–76 p. 13–76 construction piping design trunkline stabilisation requirement slugcatcher calcarenite pty ltd perth plough...

... are also successful). Cost per foot (standard cost per boot equation using bit cost and cost of rig time) reductions vary from 19% to 250% in 8 1/2" bit runs (See Figures 1 and 2). p. 12–1 p. 12–1 bit design operation bit life supplier requirement manufacturer nozzle erosion cutter ssb...

... ratios for such developments were previously considered significantly unattractive, was accelerated. The previously considered significantly unattractive, was accelerated. The requirements of high financial outlays for such offshore projects clearly dictated the necessity of cost savings in the materials...

... column has not yet been used. BOILER FUEL The converted tanker was equipped with two 50000 kg/hour standard marine boilers. The boiler room equipment was completely redundant to insure steam for vessel maneuverability at all times. The converted vessel does not require steam for maneuverability...

... geothermal reservoir construction geothermal power plant gas concentration candenser requirement fiberglass preliminary design pipe power plant altitude selection hydrogen sulfide renewable energy condensate consideration condenser maintenance INTRODUCTION The design under...

... be achieved if the spread of current from the platform-based cathodic protection systems coula be increased (alternative ( 3 )), since this would decrease the number of anode sleds required. Accordingly work was also commenced on this alternative, as a possible means of reducing the overall cost...

... ABSTRACT This paper briefly discusses the abnormally high temperature and pressure conditions in the Arun Gas Field and examines the special mud requirements caused by these extreme conditions. The next section focuses on the Liquid Mud Plant (LMP) which has been developed for use in the Arun...

... falls off. By the year 2000, petroleum imports into the United States may total over 10 million barrels daily, double the level of 1982, if U.S. oil production declines as forecast. Greater penetration of this market by South East Asian producers may require a re-orientation of marketing strategies...

... iron plant and a 2000 ton/day methanol plant presently under construction. The project is targetted to come on stream second quarter of 1984. gas processing operation platform mmscfd lng requirement gas monetization government methanol plant power plant liquified natural gas upstream...

... and gas production for allocation purposes. The paper is divided into two main parts; malaysia procedure custody transfer repeatability flow metering south ecst asia session 5 inspection production monitoring malaysian custody transfer production control petronas requirement accuracy...

... software computer operating system arun field aspoor mobil oil indonesia inc measurement and control information production control requirement application reliability calculation printer host computer scada system operator interface database objective upstream oil & gas...

... ABSTRACT Modern design philosophies for offshore cranes require the structural components to be designed for the dynamic loadings experienced in the offshore environment. If these predicted impact loads are applied to the relevant winch load-paths, then the ccmponents in those load-paths can...

... application equipment layout hull asset and portfolio management field development optimization and planning requirement deck structure bearing capacity upstream oil & gas installation production rate conductor jack-up platform production platform water depth mechanism subsea system...

... bearing capacity is exceeded by the pressure imposed by the footing due to an increase in leg load. After preloading and when all conditions are deemed satisfactory, the preload is removed by dumping the ballast and the hull is jacked up to the required airgap. LEG PENETRATION A rig may...

... operation fixation system subsea system survival condition reduction requirement cantilever hull chord drilling equipment type 3000 steel strength platform upstream oil & gas north sea arrangement hostile water asia session 7 cj series design aspect INTRODUCTION The jack-up...