Abstract
In petroleum reservoirs only a small fraction of the original oil-in-place is economically recovered by primary, secondary, and tertiary recovery mechanisms. A considerable amount of hydrocarbon ends up unrecovered or trapped due to microscopic phase trapping in porous media which results in an oil recovery factor typically less than 50%. Waterflooding is by far the most widely used method to increase oil recovery. The oil that remains in the porous media after waterflooding is called remaining oil saturation (ROS) which is larger than the relative permeability residual oil saturation (Sorw or simply Sor). This residual oil saturation varies depending on lithology, pore size distribution, permeability, wettability, fluid characteristics, recovery method, and production scheme. Determination of the residual oil saturation of a reservoir is a key parameter for reserve assessment and recovery estimates. Further, reliable Sor data is important for investigation of possible incremental recovery under Enhanced Oil Recovery (EOR) methods.
Various residual oil saturation measurment techniques are available both at laboratory and field scale. None of the techniques can be regarded as a single best method of determining Sor. Depending on the complexity of the reservoir under study, combinations of methods are always advisable for appropriate Sor determination.
This study is an up-to-date review of techniques used in determining Sor in laboratory and field. The study further reports on the advantages and limitations of each method and provides recommendations for best practices.