... well with optimal history match case. Multiple scenarios were simulated to improve gas recovery by optimizing well length and improved completions with multi-stage fracturing. Based on the analysis, it is inferred that wells having better reservoir permeability and reservoir pressure have potential...

... rates. Key features such as compressibility, bottom-hole pressure, reservoir pressure, percentage of produced working gas, and porosity were identified as influential parameters. The ANN model achieved a coefficient of determination (R²) of 0.998, indicating very high accuracy in predicting gas...

... demonstrated a remarkable recovery in heavy oil reservoirs, yet numerous challenges were faced. One of which is accelerating reduction of reservoir pressure. A successful thermal recovery process requires low reservoir pressure to ensure the presence of the steam phase in the reservoir at operationally...

... Abstract In the Daleel field, oil production comes primarily from low permeability reservoirs containing light oil. Due to limited aquifer support, conventional waterflooding was used when reservoir pressure fell below the bubble point, resulting in gas interference and flow loss in many wells...

..., the UeR has no performance analogs, complicating the planning of its future development. This paper presents the results of a waterflood (WF) pilot program initiated in 2022, with one injector supporting two producers to address declining reservoir pressure and boost oil recovery. The pilot demonstrated...

... & simulation calculation constraint optimisation facility model spreadsheet petroleum development oman workflow well model surface network model production facility reservoir pressure calibration limit diagram Introduction Petroleum Development Oman embarked on the initiative to implement...

..., synergistically improving recovery rates with gas storage, and peak shaving through UGS (underground gas storage). When reservoir pressure declines below the dew point pressure, retrograde condensation occurs, leading to reservoir contamination, reduced pore space availability for gas storage, and diminished...

... production control geological subdiscipline co2 reservoir acid stimulation liquid co2 operation middle marrat fracture stimulation treatment depletion marrat reservoir flowback carbonate reservoir marrat formation application efficiency reservoir pressure kuwait Introduction...

... reservoir pressure. Foam was selected as treatment fluid to utilize it properties of excellent solid suspension, curing the lost circulation, and lower the hydrostatic pressure in the wellbore. However, the gas in the foam reduced the milling efficiency as a result of lower torque generated. Hence...

... characterization geological subdiscipline formation petroleum engineer normalization reservoir pressure completion society evaluation thru additional stimulation strategic methodology opportunity different formation gamma ray curve oman petrophysical evaluation Introduction The stimulation...

... improvement upstream oil & gas gas oil gravity drainage reservoir formation gas enhanced recovery waterflooding gas production complex reservoir autonomous gas shut-off pressure drop reduction open hole section interference nearby well sultanate compartment reservoir pressure gogd process...

..., as a further cycle 3 is currently planned early 2018, in order to derisk the mechanism for larger injected gas volumes, with a possible phase 2 to be planned later on. gas injection cycle 1 mechanism sm 3 Injection Rate Upstream Oil & Gas immiscible gas injection pilot reservoir pressure...

... pressure tracer enhanced recovery information fusion vertical steam conformance reservoir pressure steam breakthrough Artificial Intelligence steam-assisted gravity drainage Steam Injector steam injection surveillance water cut thermal method SAGD injector concentration producer...

.... Consequently, the "A" West development strategy includes an Aquifer Pump Off (APO) system. The key APO management objectives are: Lower the reservoir pressure and hence: a. Improve injectivity. b. Improve heat efficiency (more latent heat). c. Prevent quenching of the injected steam. Secure...

... the reservoir and source rock is entirely encased by salt. The crude is light, sour and often heavily undersaturated. Despite significant depths of 3000-5000m and initial reservoir pressure gradients often far above the hydrostatic gradient, the primary depletion recovery is in general low, in the range of 10...

... Hall plot horizontal well permeability drillstem testing Thickness steam injection reservoir response injection upper-b sand reservoir performance reservoir pressure cumulative oil production ratqa field oil production observation well steam front injectivity drillstem/well testing...

... field for this study is located in South of Oman, where relatively-thin clastics reservoirs at moderate depths are dominant. Reservoir oil is highly under-saturated, 16 API gravity with very low solution gas oil ratio, initial oil viscosity over 800 cP and initial reservoir pressure of about 8,700 kPa...

... Methodology chemical flooding methods polymer co 2 Kuwait Upstream Oil & Gas EOR technology salinity waterflooding reservoir pressure Screening Burgan Field screening index EOR screening screening criteria reservoir gas injection Introduction The strategy of the Kuwait Oil Company...

... of petroleum engineers Corrosion Management reservoir pressure high pressure sour reservoir reservoir southern oman Introduction The Cluster is located in the south-eastern part of the Sultanate of Oman ( Appendix Figure 2 ). Since the first oil discovery in 1997, a successful exploration drilling...

... SAGD reservoir pressure thermal development thick heavy oil reservoir Steam Stimulation producer Steam flood Steam Injector steam drive West Field Artificial Intelligence injector steam injection Oman reservoir steam conformance conversion injection society of petroleum engineers...