1-20 of 68
Keywords: producer
Close
Sort by
Proceedings Papers

Paper presented at the SPE Conference at Oman Petroleum & Energy Show, April 22–24, 2024
Paper Number: SPE-218500-MS
... Abstract CO2 injection in gas condensate reservoirs has the potential to enhance gas recovery while reducing CO2 emissions, aligning with Petroleum Development Oman’s (PDO) goal of decreasing greenhouse gas intensity and producing low-carbon oil. PDO has a rich portfolio of gas condensate...
Proceedings Papers

Paper presented at the SPE Conference at Oman Petroleum & Energy Show, April 22–24, 2024
Paper Number: SPE-218544-MS
... full field implementation injection collaboration physics-based analytical model efficiency producer application Introduction The Mukhaizna field is located in the Sultanate of Oman ( Malik, et al., 2018 ). This field employs a technique involving continuous steam injection into wells...
Proceedings Papers

Paper presented at the SPE Conference at Oman Petroleum & Energy Show, April 22–24, 2024
Paper Number: SPE-218545-MS
... injectivity-aid viscosity polymer flooding low dose surfactant injectivity-aid injection producer enhanced recovery injector polymer injectivity application Introduction Polymer flooding is the most widely applied form of Enhanced Oil Recovery (EOR). Originally, polymer flooding was used...
Proceedings Papers

Paper presented at the SPE Conference at Oman Petroleum & Energy Show, April 22–24, 2024
Paper Number: SPE-218595-MS
... to come out of solution until it reaches a certain saturation where it eventually becomes mobile and is produced. This reduces reservoir energy and introduces a compressible element that reduces waterflood efficiency and wastes energy if the reservoir needs to be re-pressurized. Additionally, gas...
Proceedings Papers

Paper presented at the SPE Conference at Oman Petroleum & Energy Show, April 22–24, 2024
Paper Number: SPE-218674-MS
... injected or produced during a basic interval at a well to be considered active, and general information such as names for the field, reservoir or production scenario analyzed. Abstract In the oil and gas industry, vast numbers of simulations are commonly utilized to evaluate production scenarios...
Proceedings Papers

Paper presented at the SPE Conference at Oman Petroleum & Energy Show, April 22–24, 2024
Paper Number: SPE-218750-MS
... wells. As a result, extra steam injection capacity has been added to fleet by converting gassed out producers to steam injectors. The highlight of the project was that with the 7" injection tubing, the steam injection capacity increased significantly and eliminated the need of drilling 4 new steam...
Proceedings Papers

Paper presented at the SPE Conference at Oman Petroleum & Energy Show, April 22–24, 2024
Paper Number: SPE-218699-MS
..., reflecting the polymer flood response in the complex geological reservoir. Challenges arise from unexpected producer issues and viscosity sampling method, requiring close monitoring. Quarterly injection logging demonstrates improvements in the vertical injection profile. Integrating the evaluation results...
Proceedings Papers

Paper presented at the SPE Conference at Oman Petroleum & Energy Show, March 21–23, 2022
Paper Number: SPE-200031-MS
... additives, evaluating the possibility of oil gain in producing wells around the test injector and providing some input to the process of flood pattern optimization. A nine-month's polymer injectivity test has been implemented in HRD sandstone reservoir (Karim Small Fields’ Cluster, Sultanate of Oman...
Proceedings Papers

Paper presented at the SPE Conference at Oman Petroleum & Energy Show, March 21–23, 2022
Paper Number: SPE-200100-MS
... & gas pilot well water chase chemical flooding methods concentration waterflood producer state condition oil saturation pilot area enhanced recovery asp injection tracer stage asp flooding west salym displacement efficiency injection tracer injection stage alkaline-surfactant-polymer...
Proceedings Papers

Paper presented at the SPE Conference at Oman Petroleum & Energy Show, March 21–23, 2022
Paper Number: SPE-200185-MS
... injector icd completion sa completion oil recovery almarri 2018 inflow control device upstream oil & gas thermal case icd-2 thermally induced fracture producer reservoir Introduction Inflow Control Devices (ICD) have been successful employed to increase the recovery. ICDs are well...
Proceedings Papers

Paper presented at the SPE Conference at Oman Petroleum & Energy Show, March 21–23, 2022
Paper Number: SPE-200290-MS
... control directional drilling drilling fluid formulation concentration polymer pattern production technology production well drilling operation polymer injection presented producer injection allocation reservoir tracer test analysis waterflooding polymer pilot well upstream oil & gas...
Proceedings Papers

Paper presented at the SPE Conference at Oman Petroleum & Energy Show, March 21–23, 2022
Paper Number: SPE-200154-MS
... injectors and oil produced has increased. Ability to drill future wells according to the current field development plan became uncertain. Due to dynamic communication between units 5, 6 and the 7, it has been concluded that studying the 6 and 7 layers in isolation may not provide robust...
Proceedings Papers

Paper presented at the SPE Conference at Oman Petroleum & Energy Show, March 21–23, 2022
Paper Number: SPE-200059-MS
... Abstract Waterflood response in a brownfield with complex reservoir dynamics have significantly delayed the expected water injection response in Field ‘A’. The field is one of the highest oil producers in Oman South, spead over ~37 Km 2 , with more than 400 active wells, contributing...
Proceedings Papers

Paper presented at the SPE EOR Conference at Oil and Gas West Asia, March 26–28, 2018
Paper Number: SPE-190336-MS
... will be placed perpendicular (cross) to the producers. Additionally, the XTDSD will assess the approach of utilizing a combination of steam flooding at the top, using vertical wells, and a gravity drainage process at the bottom using horizontal wells. The X-TDSD trial scope includes the drilling and completion...
Proceedings Papers

Paper presented at the SPE EOR Conference at Oil and Gas West Asia, March 26–28, 2018
Paper Number: SPE-190341-MS
... in combination with understanding how to improve vertical and areal sweep conformance. A fully integrated surveillance plan using advanced technologies including down hole DTS temperature fiber cable, covering the whole wellbore have been installed in all producers. In addition to that real-time wellhead...
Proceedings Papers

Paper presented at the SPE EOR Conference at Oil and Gas West Asia, March 26–28, 2018
Paper Number: SPE-190392-MS
...; demonstrate long term injectivity of polyacrylamide polymer (50 cP) without fracturing the formation; assess the effects of reservoir geology on the ASP process performance, particularly on sweep efficiency; develop cost-effective techniques for breaking produced oil-brine-surfactant emulsions; test...
Proceedings Papers

Paper presented at the SPE EOR Conference at Oil and Gas West Asia, March 26–28, 2018
Paper Number: SPE-190362-MS
... gravity drainage information unconsolidated high viscous formation monitoring ratqa field enhanced recovery breakthrough completion producer DTS Injection Rate real-time fiber-optic monitoring society of petroleum engineers Introduction Ratqa Field was discovered during the late 70s...
Proceedings Papers

Paper presented at the SPE EOR Conference at Oil and Gas West Asia, March 26–28, 2018
Paper Number: SPE-190405-MS
... The field top structure map shows that crest forms an elongated spine trending from the south to the north. The west and also partly the eastern flank show more faulting indicating baffling. Thus the development focused on the central part of the field along the crest with producers and injectors...

Product(s) added to cart

Close Modal