... permeability. An examination of stimulation, production test, pressure buildup (PBU), diagnostic fracture injection test (DFIT) as well as wireline-formation testing (WFT) data are analyzed in these wells for understanding well deliverability. Both short-term and long-term production history are analyzed...

... oxidation) and thermal cracking has remained a challenge. The present paper discusses the methodology for development of the kinetic model, its use for successfully history matching the ISC process at laboratory & field scale and optimizing the future development strategy through insights generated from...

... system. It will share different case histories and best practices from BP Wells by using actual well data and performance. This topic can be summarized in: - Heavy oil harsh well condition challenges & operational performance of beam pumping system in such these conditions. Solids...

... or reservoir parameters, except characterizing the flow regimes from the production history. The concept of the rate-normalized flow rate derivative 1 q t x q ′ is developed based on the power-law type analytical models of the flow regimes that can be characterized from the production...

... in an economic evaluation to select the optimal concept for the commercial-scale ASP flooding project in Marmul. geology asp flooding conference geologist paper enhanced recovery injection reservoir heterogeneity flooding polymer flooding forecast efficiency history chemical flooding methods...

... the feed water for the steam generation. In order to meet the above objectives, the following methods were used to evaluate the targeted pump off rate: Material Balance analysis. History matched full field model. History matched regional aquifer model, whereby several aquifer pump-off scenarios...

... Abstract In 2017 MOL celebrated the 80 th anniversary of the first HC discovery of Hungary within the current territory of the country. This long history is coupled with also a long history of different EOR experiments and projects. Laboratory tests already started in the fifties followed...

..., and production performance of the steam flooding pilot test in Fula North East. This paper will present the results from a study that done using advanced thermal software simulator on a sector model that extracted from FNE full field model, pilot area coverage 4 injectors and 9 producers. History matching...

... reservoir simulation model must be set up and solved to interpret the results of a SWCTT. Such models are usually complex enough that assisted history matching is required to optimize the parameters required to describe the physics of the problem. In this paper we describe how state-of-the-art parameter...

... data injector steam drive fraction composition solvent pattern bitumen uplift injection uncertainty range SAGD solvent recovery History bitumen production solvent enhanced steam drive manual sample gross rate Canada Introduction The addition of additives to steam injection...

... injector History producer well reservoir carbonate reservoir Introduction Enhancing oil recovery from low permeable (in particular carbonate) formations has historically been challenging. Gas injection can be considered, however a successful flood is in many cases hampered by gravity effects...

... test establishes that polymer injection is viable in Bhagyam Fatehgarh reservoirs. A history matching exercise was carried out using a sector model extracted from our full-field simulation model. The effect of production and injection in offset wells was captured in the sector model. Local grid...

... different, in geologic terms, Precambrian reservoir with much lower permeability, oil saturations and significantly more layered reservoir architecture. Geological and petrophysical workflows together with dynamic modeling history matching iterations resulted in reducing subsurface uncertainties...

... to a dynamic model with 400,000+ cells. This sector model approximately 15% of the field production area, from the crestal part of the field comprises 87 producers and 78 Limed Entry Perforated injectors with several years of production and steam injection history. A precursor for almost every reliable...

... of reaction. Simulation of combustion tube experiment has been carried out and expanded to the block model in CMG STARS. The tuning of the reaction parameters is to generate the temperature profile of the twelve zones of the combustion tube experiment. History matching with the data generated in simulation...

... chemical flooding methods history shale conformance control injector permeability aquifer polymer flood producer flood preferred completion upstream oil & gas enhanced recovery spe 129157 Field Background The structure is a four-way dip closed anticline caused by outward salt...