...) is low in this reservoir, hydraulic fracturing is required to get substantial recovery from the wells. The field has been under production since 2010. The development of this field has been carried out in three phases and more than 150 fracturing treatments have been pumped in this reservoir till date...

... requirement is minimal, conventional process has several limitation such as space availability, load on structure, frequent monitoring etc., hence may not be suitable for mitigation of H 2 S from processed gas and oil. In this work, an approach is adopted for sweetening of sour gas and sour crude...

... injectors. Secondly injection gas requirement for the process will be fulfilled partly through the recycling of produced gas and rest from free gas production from another pay of the same field. Finally it is examined that current existing facility of gas compression will sufficiently cater the additional...

.... Requirement of ESP change outs to restore/enhance well production in cases such as undersized pumps, pump head degradation requires an expensive work-over. However, an option for secondary additional lift (JP) installation along with primary lift (ESP) in completion system can eliminate the costly wok-over...

... anisotropy. The intervals where the sand and shale are not in pressure equilibrium state (i.e. shale pressure > sand pressure), the minimum MW requirement is defined by either pore pressure or shear failure gradient (SFG) of shale formation. Whereas, maximum limit is marked by fracture gradient...

... how the transient simulations helped to monitor progress, identify and respond quickly to address the challenges during initial start-up operation of the deepwater gas field in Indian east coast. It emphasizes the need for accurate estimation of rich MEG arrival time and the minimum required gas flow...

... Recovery (EOR) methods including thermal, chemical and gas injection which are increasingly being pursued in many fields globally require additional meticulous reservoir surveillance to understand and quantify the effectiveness of the EOR scheme which adds to the value of such projects. Interpretation...

... alternative facilitating technology, focused on providing the required level of specification for the operations, with a reduction in the base cost of the technology, namely Rigless operations. The core technology is presented, with key facilitators. The application of the technology is presented in two case...

... inputs for artificial lift design are seam depth and well productivity, while PCP head and flow rate, down-hole string sizing and motor sizing are the required outputs. To take a case study of PCP system optimization, we have Well – A, where the bottom perforation is at 600 m and the water production...

... concluded that a parallel Well Delivery PGS (WD PGS) Process should be developed based on IOCs' and NOCs' best practices for well delivery, KOC's experience with the PGS Process, and the fit-for-purpose requirements of the concerned KOC stakeholders in all business Directorates. In this paper, we...

... reservoirs. proppant gas production rate hydraulic fracturing friction fracturing fluid Mandapeta field fracturing materials Upstream Oil & Gas frac treatment proppant concentration entry friction completion requirement optimisation society of petroleum engineers optimization...

... sustainable development grid power import condensate module requirement saturation temperature boiler Introduction CIL is an E&P company with its major field of operation located in Rajasthan Block. CIL produces in an average of 200,000 BOEPD of crude oil and 45 MMSCFD of gas. Also...

... infrastructure maintenance setup field development optimization and planning new field development project procurement information management platform digital technology operation Upstream Oil & Gas digital ethics control system requirement automation Implementation Field Development Project...

... cement cement chemistry concentration design 1 weak formation glass bead cement formulation strength casing and cementing Exhibition downhole condition slurry microsphere rheology application compressive strength design 2 requirement cement slurry gel strength Introduction...

.... controls and umbilicals selection pipeline future expansion cable umbilical node umbilical size distribution scheme configuration Upstream Oil & Gas communication consideration requirement subsea system distribution philosophy Distribution System subsea field distribution scheme...

... For initial steady state calculations PROSPER software was used to find required gas injection pressure, rate, depth and orifice size as well as gas lift performance of the wells. PIPESIM was used for preliminary hydraulic and thermal performance of the network from subsea wells to topside...

... The design requirements and recommendations for intervention riser systems are defined in API 17G/ISO 13628–7 standards. Most of the operators have their own additional requirements, which need to be addressed during design. A riser system is designed such that no single failure will cause any...

... that transfer the cuttings from the shakers directly to the VCD unit. This paper illustrates that in cases where multiple VCDs are required, the number of units may be optimized with minimal loss in base oil recovery and such optimization may also deliver cost benefits dependent upon drilling activity levels...

.... Such designs have a cascading impact on the material requirement, offshore construction time and overall project cost. The FEA approach is effectively utilised to have an optimized boundary condition i.e. by allowing actual seabed modelling based on bathymetry data at close intervals, pipeline layout...

... reporting. reserves replacement relational database upstream oil & gas asset and portfolio management reserve data database change record reserve change tracking management system requirement spreadsheet data mining reserve category spe 153414 reserve spreadsheet society...