1-20 of 80
Keywords: Corrosion Inhibition
Close
Sort by
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 16–17, 2021
Paper Number: SPE-205054-MS
... & gas corrosion rate corrosion inhibition materials and corrosion riser corrosion corrosion management wellhead alloy 718 petroleum engineer metallurgy crevice corrosion oxygen field condition carbon steel oxygen ingress galvanic corrosion chemical injection system coupon galvanic...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 16–17, 2021
Paper Number: SPE-205048-MS
... management field trial murugesan operator residual measurement technique customer site ci concentration corrosion inhibition production chemistry concentration onsite corrosion inhibitor residual method field sample petroleum engineer Introduction Corrosion of steel is a challenge...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 16–17, 2021
Paper Number: SPE-205055-MS
... of benzotriazole displayed a reduction in coefficient of friction up to 95.93%. At ambient condition, optimal ratio of mineral oil:benzotriazole (M:B) which gives best lubricity performance on synthetic-based mud system is 80:20. This leads to improved corrosion inhibition and lubricity of the synthetic-based...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 16–17, 2021
Paper Number: SPE-205057-MS
... CUI in all innovation disciplines. machine learning pipeline corrosion corrosion inhibition materials and corrosion subsurface corrosion oilfield chemistry flowline corrosion artificial intelligence riser corrosion corrosion management drain hole well integrity insulation insulation...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 16–17, 2021
Paper Number: SPE-205036-MS
... in annular flow. Therefore this 9-5/8" 13Cr casing section may expose to dynamic conditions ( Figure 1 – condition 3). A range of temperature estimated for the different wells and depths of the development (150°C to 163°C) was tested. corrosion inhibition oilfield chemistry well integrity...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 16–17, 2021
Paper Number: SPE-205042-MS
... to initiate localized corrosion. corrosion inhibition oilfield chemistry well integrity susceptibility materials and corrosion riser corrosion corrosion management pipeline corrosion subsurface corrosion h2s management bisulfite szklarska-smialowska corroded site os-a oxygen scavenger os...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 16–17, 2021
Paper Number: SPE-205037-MS
... microbial community data for the improvement of souring modelling and field souring control strategies. water management workplace hazard corrosion inhibition artificial intelligence oilfield chemistry microbial method corrosion management h2s management untreated group health & medicine...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 16–17, 2021
Paper Number: SPE-205043-MS
.... Oxidation along with chemical corrosion will accelerate the corrosion effect of acid gases, which will make the inhibition process quite difficult. flowline corrosion materials and corrosion riser corrosion artificial lift system oilfield chemistry corrosion inhibition enhanced recovery...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 16–17, 2021
Paper Number: SPE-205475-MS
... and minimises the occurrence of crevice corrosion at the electrodes. Crevice corrosion is a hazard for ENM electrodes when trying to make a comparison with corrosion inhibition calculated using the standard weight loss measurement after immersion (WLM) method. For these preliminary trials we are exploring...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 18–19, 2018
Paper Number: SPE-190902-MS
... qualification to ensure that chemical behavior is understood both before field application and that it is confirmed once applied. Pipeline Corrosion materials and corrosion flowline corrosion Corrosion Inhibition riser corrosion Corrosion Management inhibitor methyl orange method Production...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 18–19, 2018
Paper Number: SPE-190900-MS
... flowline corrosion Production Chemistry Pipeline Corrosion Subsurface Corrosion oilfield chemistry Upstream Oil & Gas Efficiency hydrocarbon chain length chain length Corrosion Inhibition carbon steel quaternary amine corrosion inhibitor steel surface electrode corrosion inhibitor steel...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 18–19, 2018
Paper Number: SPE-190911-MS
... was incorporated into the incumbent subsea corrosion inhibitor. The work included identification of suitable multiphase H 2 S scavenging chemistry, tailoring of the multipurpose chemical to retain corrosion inhibition properties, and confirmation that this new chemistry did not deleteriously impact performance...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 18–19, 2018
Paper Number: SPE-190914-MS
.... Production Chemistry H2S management resistance chloride content Corrosion Inhibition complex reservoir Corrosion Management material selection oilfield chemistry Upstream Oil & Gas concentration Well Environment HPHT high pressure high temperature cost effective material selection specimen...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 18–19, 2018
Paper Number: SPE-190909-MS
... inhibitor formulations as well as case studies using field specific formulations. This will assist in improving the design of corrosion inhibitor screening programs and eliminating common errors and artefacts. Corrosion Inhibition oilfield chemistry well integrity corrosion inhibitor materials...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 18–19, 2018
Paper Number: SPE-190887-MS
... are straight coupling fittings in SS 31600 / 1.4401 austenitic stainless steel designed to mate to ½″ tubing. Typical suppliers for such items are Parker, Swagelok, Hoke, & Gyrolok for example. The Components Corrosion Inhibition oilfield chemistry well integrity fitting Pipeline Corrosion...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 18–19, 2018
Paper Number: SPE-190908-MS
... Pipeline Corrosion Corrosion Inhibition flowline corrosion Subsurface Corrosion H2S management oilfield chemistry well integrity materials and corrosion riser corrosion elastomer protein reaction bms Production Chemistry Upstream Oil & Gas refinery water corrosion rate...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, June 18–19, 2018
Paper Number: SPE-190899-MS
... carried out by specialist and newly trained non-specialist flow loop personnel. Examining Limiting Parameters Monoethylene Glycol Corrosion Inhibition H2S management Production Chemistry inhibitor corrosion rate Upstream Oil & Gas concentration PPM corrosion inhibitor commercial...
Proceedings Papers

Paper presented at the SPE International Oilfield Corrosion Conference and Exhibition, May 9–10, 2016
Paper Number: SPE-179945-MS
..., and monitoring; thereby reducing operating cost, lost production and operational risk. flowline corrosion Production Chemistry Upstream Oil & Gas Corrosion Inhibition oilfield chemistry well integrity materials and corrosion riser corrosion Efficiency optimization responsibility Corrosion...

Product(s) added to cart

Close Modal