... are attached on the surface of the sensor and excitations are applied to some electrodes and responses are measured from other electrodes. Assuming a fast separation in the following crude oil tank, the operator expects the flow being stratified already in incoming trunk line. In real life this is not often...

... Pipeline Corrosion well integrity separator assembly materials and corrosion Upstream Oil & Gas fabrication bonding material loading bonding agent society of petroleum engineers application substrate finite element analysis Subsurface Corrosion strength reinforcement plate hot work...

... Abstract For the Santos owned and operated Wortel field, shallow waters offshore Indonesia, there was a need to install compact inline gas/liquid separation equipment with high performance. Due to space constraints, an inline gas/liquid separator was selected. Santos implemented the ASCOM...

..., and it is important to minimize both the operational and capital costs. Compact, inline separation technology could be a key technology for mature fields, and also for subsea fields at large water depths where the weight is critical. Statoil has identified inline separation as an important technology to increase...

... Abstract The East Brae platform is located in UK Block 16/3a and is operated by Marathon Oil U.K. LLC. The platform has a high pressure (HP) separator 406 psig (28 barg) and a test separator operating as a low pressure (LP) production separator 217 psig (15 barg). There are currently 12...

... is of 60,000 barrels/day (b/d). Review of field architectures For these two base cases, the following architectures will be investigated. Conventional loop The most common architecture used to develop deepwater fields is a production loop comprising two separate insulated production lines...

.../liquid subsea separation. The three subsea gas/liquid separation and pumping units on the sea bed will constitute a World Technology First for a development of this scale. After separation, the liquids will be pumped to the surface using hybrid pumps, specially designed and qualified for PAZFLOR...

... of the technology to augment and complement wireline and LWD technology is identified and applications where these conventional data are unavailable are considered. log analysis Upstream Oil & Gas water saturation Artificial Intelligence separator porosity machine learning drilling operation...

... recorded from 2007 to 2008. The reductions are primarily a result of the following initiatives. Rerouting of recycles - rerouting of e.g. used H2S scavenger have improved separation and produced water treatment Individual KPI's for the different produced water treatment systems On-line cleaning...

... 108656 operation correction choke Reservoir Surveillance drillstem/well testing sm 3 kristin well cleanup calibration tank KPI system Drillstem Testing separator consideration sand separator well cleanup cleanup valve society of petroleum engineers production logging kristin well clean...

.... The first Roxar Oil-in-water monitor was installed in May 2006 on Statoil's Sleipner A platform in the North Sea. Statoil is using the monitor to measure overboard water discharge, ensuring that it meets environmental requirements and efficiently monitors the separation process. Immediately after...

...) is about 40.000 bbl/day. Therefore depending on the conditions the increased oil production can be substantial. enhanced recovery subsea processing separation and treating pressurized onshore test rig spe 83976 enhanced oil recovery technology development society of petroleum engineers oil...

... shows the basic design concept: Abstract Twister™ is a revolutionary gas conditioning technology which has been under development for natural gas applications since 1997. Condensation and separation at supersonic velocity is the key to some unique benefits. An extremely short residence time...

... slugs and gas surges may result in large oil and gas production losses when they arrive at a production platform. Slugging may cause high-level trips in separators and lead to unstable operation of topside facilities. The S 3 ® Slug Suppression System provides a reliable solution to the slugging problem...

... reservoir simulation manifold reservoir characterization enhanced recovery ullage separator anasuria pipeline enterprise oil water injection cook project subsea system Field Description The Cook Field is a high pressure high temperature (HPHT) field which lies within UK Block 21/20a some...

...-echo mode; and devices based on measuring the variations in fluids heat transport; as well as nucleonic with which a number of ways have been configured specifically for the application of subsea separation systems. Most of these techniques are being currently commercialised. This paper is therefore...

... team addressed the technical challenges of the project, and gives feedback on progress achieved since start of production in July 1997. artificial lift system drillstem/well testing Drillstem Testing longest subsea esp tie-back separator connector Upstream Oil & Gas guillemot crude...

... Abstract This paper is a description of a system which separates the produced oil and water in a high WOR (Water Oil Ratio) well, injects the produced water, and pumps the oil to the surface. The unique feature of this system is that the production, separation, and injection are all...

... operation within the operational limits. valve dependability application availability maintenance upstream oil & gas drillstem testing personnel probability target safety level separator calculation relief valve test interval spe 030394 proof test interval demand rate shutdown...

... separators. Design criteria for separators like foaminess and size of water droplets have little value when sizing separators if it is used without evaluating the positiv effect of the production chemicals. Testing on some of Norsk Hydro’s offshore facilities have shown that water treatment plants...