Gas reservoirs contain substantial amounts of natural gas and, in some cases, associated high API liquid hydrocarbons. Condensation of heavy hydrocarbons, especially in the area closer to the wellbore, occurs as a direct result of the decline in reservoir pressure. This hydrocarbon condensate, and in some cases water, tends to accumulate in the pore space and form a liquid bank. This liquid bank will result in a reduction in gas relative permeability and overall reduction in the well's productivity. This paper illustrates the synthesis and utilization of surface modified silica nanoparticles to mitigate the liquid banking phenomenon in gas reservoirs.

Silica nanoparticles (S-NPs), of different sizes, were synthesized using the Stöber process. The impact of the nanoparticle size and degree of functionalization with different hydrophobic and omniphobic groups on altering the rock wettability properties to mitigate liquid banking in gas reservoirs were studied. The S-NPs (of sizes between 50-400 nm) were functionalized with various linear and branched fluoroalkyl groups, terminal amine, and epoxy groups. The particle size of surface modified silica nanoparticles was determined using dynamic light scattering (DLS). The performance of the surface modified silica nanoparticles was evaluated through measuring surface charge, change in contact angle, and by performing core flow experiments at reservoir conditions.

A glass slide dip coated with 135 nm surface modified silica nanoparticles solution derivatized with terminal amine and perfluoroalkyl group provided a contact angle of 120° and 83° with water and decane, respectively. The contact angle can be tailored by changing the amount of amine and perfluoroalkyl concentrations on the particle surfaces. A contact angle of around 90° indicates a nonwetting neutral surface that results in minimizing capillary pressure and enhancing mobility of both hydrocarbon and water liquid phases. Using core flow studies and by estimating the improvement in gas and liquid relative permeabilities, surface modified silica nanoparticles treatment demonstrated a comparable performance to commercially available solutions at 1/5 the treatment volume. The surface modified silica nanoparticles sustained its performance indicating a stable and permanent coating on the rock surface.

The silica nanoparticles functionalized with fluoroalkyl group, terminal amine and epoxy can be directly pumped without the need for a pretreatment of the rock surface. This results in less complexity when it comes to the field operation. The dual- functionalized silica nanoparticles were found to be effective in changing the rock surface wettability to neutral or nonwetting, thereby providing a potential solution to liquid banking problem in gas reservoirs.

You can access this article if you purchase or spend a download.