The Bakken formation is well known for producing brine very high in total dissolved solids (TDS). Halite, calcium carbonate, and barium sulfate scales all can pose substantial production challenges. Trademarks of Bakken produced brine include elevated concentrations of sodium (>90,000 mg/L), chloride (>200,000 mg/L), and calcium (>30,000 mg/L), contrasted against low concentration of bicarbonate (50-500 mg/L).

In the past 3 years, operators have experienced unexpected instances of severe calcium carbonate scale on surface where produced fluids from the production tubing commingled with the gas produced up the casing. Initially treated as one-off scale deposits despite the application of scale inhibitor, acid remediation jobs or surface line replacement were typical solutions. As time has passed, this issue has become more and more prevalent across the Bakken. Investigation of this surface issue discovered a most unexpected culprit: a low TDS, high alkalinity brine (up to 92,000 mg/L alkalinity measured to date) produced up the casing with the gas. When mixing with the high calcium brine typically produced in the Bakken, the resulting incompatibility posed remarkable scale control challenges.

The uniqueness of this challenge required thorough analytical work to confirm the species and concentrations of the dissolved ions in the brine produced with the gas. Scale control products were tested to evaluate their abilities and limitations regarding adequate control of this massive incompatibility. The theory that corrosion contributed to this situation has been supported by a unique modelling approach. Once corrosion was identified as the likely source of the high alkalinity brine, corrosion programs were instituted to help address the surface scaling. This paper highlights the evaluations conducted to fully grasp the severity of the incompatibility, the theories put forth to date, work conducted to try to replicate the phenomena in the lab and in models, and chemical programs used in the field to address corrosion and scale.

While not known to exist in other oilfield basins, conventional or unconventional, this discovery may have implications for the broader industry if similar situations occur. The possible explanations for why this may be happening may have implications for scale control, asset integrity, and potentially even the methods by which wells are produced.

You can access this article if you purchase or spend a download.