... while keeping a balance in RF for both companies. optimization problem injector Energy Sustainability placement optimization Upstream Oil & Gas objective function NPV Artificial Intelligence new objective function function evaluation best realization oil company optimization...

...). After applying water-injection in the year 1990, the pressure decline-slope got reduced to (-30 Psi/year). Currently the field contains 27 producers and 3 injectors. The distance to the nearest water-source well is approximately 10 Kilometers. Maintaining continuous injection remained a challenge due...

... performing the full scale waterflooding project. Such study is an original conceptual contribution to the knowledge of the integration between geological and reservoir engineering data to design of a comprehensive waterflood program. waterflooding Reservoir Characterization injector application oil...

... is estimated to be approximately 2.689 billion BO with an ultimate recoverable reserve around 1.439 billion BO. Over its history, more than 250 wells were drilled. Currently, 179 wells are operating (125 producers & 54 Injectors). El-Morgan is considered highly sophisticated field due to reservoir...

... technology was developed to create baffles in the higher permeability layers to divert the injected water from previously swept layers to the un-swept zones which will improve the sweep efficiency. North Morgan Kareem reservoir selected as a pilot for BrightWater deployment by treating five injectors which...

.... Currently the team is preparing POD (Plan Of Development) regarding to Tapian Timur Full Scale Waterflood Project. upstream oil & gas injection line tapian timur field waterflood project injector water source well ggrp data reservoir waterflooding enhanced recovery spe 149853 constraint...

... Horizontal-Fractures (IHF) and off-set vertical wells with the later being in halfway of two adjacent horizontal well pairs in SAGD and acting as a steam injector was applied. The results showed such applications reduce cSOR. Found from the sensitivity analysis, Induced Horizontal-Fractures positioned...

... fractures locating at bottom of the reservoir, higher well spacing results in more desirable performance if the wells are drilled at the place of the fracture. Sensitivity analysis of injector-producer well spacing illustrated that for horizontal fractures locating around 5 m from the reservoir base...

... of chemical flooding prediction have been used to adjust the injection and production rate for individuals. relation degree polymer solution machine learning production data artificial intelligence injection injector chemical flooding methods information prediction producer differential...

... Abstract Located in Partition Neutral Zone over Kuwait and Saud Arabia border, Wafra Ratawi is a carbonate reservoir having formation dip ranging from 0.5 to 3.5 degrees at edge of the field. Waterflood is to be implemented by new injectors or converting producers to water injectors. Reservoir...

... of the pilot injector, borehole location and length. Furthermore, the model would be used to plan an efficient reservoir monitoring program including an optimized well data gathering with sponge coring for defining the remaining oil saturation. To overcome these limitations, the proposed method introduces...

... optimum reservoir pressure and offtake. However, the simulation model is too coarse to allow detail analysis at a well or pattern level. Streamline simulation allows proper modeling of the no flow boundaries between producers and injectors and pattern definition and off-take optimization. Analytical...

... challenges and delayed water flood and at the same time, staying above the bubble point pressure. enhanced recovery injector Reservoir Management Approach Reservoir Characterization Upstream Oil & Gas sabiriyah upper burgan reservoir Injectivity Challenge waterflooding Reservoir...

... Abstract This paper presents how streamline technology in combination with conventional water injection management indicators was used to effectively manage water injection in a giant field. Describing the relationship between injectors and producers is obtained from a streamline simulation...

... or offshore. enhanced recovery decision support system Engineering Exhibition application modeling Reservoir Management team approach Upstream Oil & Gas narahara operation spe 112921 Reservoir Characterization injector optimization identification multi-disciplinary team project team...

... coefficient injection thermal stress injection temperature field complex enhanced recovery injector water injector pore pressure reservoir re-pressurisation water injection consequence thermal effect Introduction Efficient water injection in oil reservoirs is often performed under...