... interpretation output and the core data as well. After that a thickness map for each facies per each reservoir was created. The resulted maps were utilized for facies model creation and consequently dominated the petrophysical properties distribution: porosity, permeability, and initial water saturation...

... Reinterpretation core data spe 164701 estimates of resource in place resource in place estimate operatorship saturation abu el gharadig basin society of petroleum engineers BOPD field development optimization and planning water saturation western desert Mmstb reservoir calculation well logging log...

... of petrophysical logging measurements were integrated with core data and formation testing data to characterize hydrocarbon/water transition zones and formation permeability and producibility. The offshore carbonate reservoir studied is composed of limestones and dolomites. Despite the inherent chemical...

... with the techniques used in measuring the physical and the fluid properties of both the core data, the interpretation of the well logs, the pressure transient analysis, and the Pressure Volume Temperature (PVT) data of the associated reservoirs. The importance of using correct data by checking its quality has become...

... porosity and water saturation with core data showing excellent correlation does not ensure the correctness of petrophysical evaluations. In this paper, it has been demonstrated that there are potential problems associated with the integration of petrophysical evaluation and core data. Sources of errors...

.... It allowed an accurate determination of clay, pyrite and siderite with a good match to core data, while the photoelectric factor could not be used because of high barite content in the mud. Magnesium from spectroscopy indicated small amounts of dolomite were present. Since rock texture has a strong impact...

... of the sulphur and consequently, the anhydrite content of the formation, enabling accurate determination of anhydrite volumes, even in the heterogeneous sections. Proper averaging techniques of the core data with log data also verified the sulphur bias at low anhydrite levels. The results of this study confirmed...

... a unique solution to characterize thinly bedded reservoirs in wells drilled with oil-based mud. well logging aluminium spectroscopy bottom reservoir silicon feldspar spectroscopy data upstream oil & gas concentration fraction core data reservoir mineral solver result dry weight...