... Abstract Perforation design including gun size, type, charge weight, configuration (shot density, entrance hole, phasing) and deployment options can significantly impact well productivity post perforation. Gun selection is a key process to ensure that the optimum gun that can yield maximum well...

... Abstract The objective of this paper is to present the comparative results of comprehensive analysis of horizontal well productivity and completion performance with vertical wells drilled and completed within same time window in the Mauddud reservoir in the Bahrain Oil Field. The study also...

... R T s c Z s c V E ) Abstract Based on a genetic algorithm and field production data, this paper reasonably optimizes the fracture parameters of multistage fractured horizontal wells (MFHWs). First, a mathematical model of MFHWs in shale gas reservoir is proposed under...

..., comparing different designs in wells next to each other in the same pad, to allow consistency in reservoir and geology conditions allowing the trials to be conclusive. Wells were flowed back for a relatively short period of time and different production analysis techniques were used to compare the different...

... where it shows promising result to have effective diversion. This chemical diverter when exposed to water or brine it disintegrates into a fine particles or dissolves, depending on the exposure time and temperature. Area Production results for a well depends on the well area being higher than...

... ball operated sleeves and openhole packers have generally been effective in delivering high productivity wells, worldwide. Successful case histories treating tight shale gas with MSF completions abound in current literature, however, it is important to note that a majority of these case histories deal...

... asia government hydraulic fracturing reservoir characterization reservoir simulation fracturing materials fracturing fluid kuwait government bgsu reservoir well productivity upstream oil & gas proppant reservoir geomechanics modeling productivity marginal low quality burgan...

..., fracture characterization and modeling has advanced significantly in providing a high-resolution depiction of the subsurface. This paper focused on examining the impact of major fractures on reservoir connectivity and well productivity. Fracture modeling and parameterization were performed using...

... drilling fluid selection and formulation fluid loss control solids-free system operation drilling fluid management & disposal drilling fluid formulation formation damage productivity drilling fluid chemistry drilling fluids and materials rigsite open hole drilling fluid property...

... will ultimately strengthen the relevance of Section 4 results to the downhole environment. Artificial Intelligence Exhibition haggerty test 1 Completion Installation and Operations experiment productivity determination tunnel tunnel wall resolution spe annual technical conference USA...

... Abstract Condensate blockage presents a serious production problem due to loss of gas productivity. Several methods have been proposed to resolve condensate blockage to restore the well productivity, most commonly used technique is hydraulic fracturing. Although, it is most commonly used...

... Abstract Objectives/Scope Downhole sand exclusion is becoming an essential sandface completion concept for brown fields in Peninsular Malaysia Oil Fields as reservoir pressure declines and formation sand weakens with production and water breakthrough. Additionally, multi-stack reservoirs...

... Abstract This paper presents a new insight into the factors that affect the initial productivity of Acid Fracturing (AF) treatments in a sour gas carbonate reservoir. Acid Fracturing is a stimulation technique used to improve the productivity or injectivity of wells. It involves pumping acid...

... Abstract Condensate banking has been identified to cause significant drop in gas relative permeability and consequently reduction of the productivity of gas condensate wells. To overcome this problem, hydraulic fracturing has been used as a mean to minimize or eliminate this phenomenon...

..., and hence water recovery and subsequent oil productivity. In this work, surface tension, interfacial tension, foam stability, sand-packed columns, and coreflood experiments were performed on a selected environmentally friendly water-based surfactant formulation. The performance of the surfactant...

..., TM10, TM20, TM30, TU10, TU20, TU30, TU40, TU50, TU60, TU70, TU80, & TU90. Of those horizons, the primary productive intervals are the TL60, TU10, TU30, TU50, TU70, & TU90. Inter-shale layers within the reservoir have been known to cause drilling challenges, particularly at high drilling...

... Abstract In the current and future scenario of increasing demand for hydrocarbons, Multi-Disciplinary Integrated Reservoir Management team is the key to achieve maximum production rates and ultimate recovery. In Raudhatain Upper Burgan reservoir production started in 1959 with initial reservoir...

... wells from the available literature, as well as our own experiences. The authors use this available data and information to describe the physical phenomena that occurs in unconventional wells, especially in the early stages of production testing. The paper describes a theoretical approach that explains...

... Abstract Oil is considered one of the main drivers that affects the world economy and a key factor in its continuous development. Several operations are used to ensure continues oil production, these operations include; exploration, drilling, production, and reservoir management. Numerous...

... Abstract Objective/Scope The objective is to achieve improved productivity from an unconventional fractured reservoir using uncemented liner completion over the standard cemented liner completion. Method, Procedures, Process Exploration and production of an unconventional fractured Najmah...